Ss Brewtech E-Kettle 304 Manuel utilisateur
Cold Brew Bucket Product Guide
Page 2
IN THE BOX
(1) 7 gal Cold Brew Bucket Lid
55 mm Thermowell
(1) Silicone Cap
(1) Stainless Steel Basket
with Molded Silicone Handle
(10) Disposable Coffee
Filter Bags
(1) Racking Arm
OPTIONAL
Conical Bottom to Consolidate Sediment
Molded Silicone Basket Handle
Brew Bucket Lid
Brew Bucket
Thermowell
LCD Temperature
Probe + Silicone Boot
Perforated Exoskeleton Basket
to Prevent Bag Tears
Disposable Coffee Filter
Molded Silicone Cap
Page 3
ASSEMBLY
Beer Inspired Rotatable Racking
Arm to Maximize Yield
Page 4
STAINLESS STEEL PREP
PRE-CLEAN
PASSIVATION
CLEANING AND SANITIZING
Thoroughly wash all surfaces of the Cold Brew Bucket assembly with Tri-Sodium Phosphate (TSP) and
hot water prior to rst use of the tank. Refer to the TSP manufacturer’s recommendations for proper
mixing concentrations. Use a soft terry cloth to scrub the component surfaces. Throughly rinse and dry
all surfaces after cleaning.
It’s good practice to periodically passivate all stainless steel equipment with an acid based solution to
establish a uniform oxide layer that will maximize corrosion resistance. Following the pre-clean step,
ll the Cold Brew Bucket with Star San at a concentration of 1 uid ounce per gallon of 70-80°F water.
Place the Basket inside of the Cold Brew Bucket and let sit for 30 minutes. For optimal care, passivation
should be performed at least once a year or anytime you believe you may have inadvertently scratched
As part of a regular cleaning regimen, both pre and post-fermentation, wash the interior surfaces of
your Cold Brew Bucket with an alkali cleaner such as PBW at a ratio of 0.75 uid ounce per gallon.
Then sanitize with Star San or another acid based sanitizer per the manufacturer’s recommendations.
Page 5
BREWING INSTRUCTIONS
STEP 1
Insert Racking Arm assembly through the bottom hole in the Brew Bucket and secure with nut.
Ensure valve is in the closed position.
STEP 2
Insert Thermowell through the upper hole and secure with nut.
STEP 3
Insert LCD Temperature Probe into Thermowell and t boot onto Thermowell ferrule.
STEP 4
Place Brew Bucket Lid onto Brew Bucket and secure with the lid clamps.
STEP 5
Insert Disposable Coffee Filter bag into Basket.
STEP 6
Fill Disposable Coffee Filter with ground Coffee.
STEP 7
Insert Basket through opening in Brew Bucket Lid.
STEP 8
Fill Brew Bucket with water by pouring over the ground coffee.
STEP 9
Secure top of bag with included zip tie.
STEP 10
Place Molded Silicone Cap onto Basket and leave undistributed for the remainder of the
brewing process.
STEP 11
When brewing is complete, raise the Basket out of the Brew Bucket, rotate Basket 45° and place
Basket on Brew Bucket Lid until draining is complete.
STEP 12
Remove the Molded Silicone Cap and slowly pull the Coffee Filter Bag out of the Basket for disposal.
STEP 13
Place Molded Silicone Cap onto Brew Bucket Lid, refrigerate and serve.
Page 6
WARRANTY
WARRANTY
LIMITATIONS
Ss Brewtech provides a one year limited warranty to the original purchaser that our product(s) will be
free from manufacturing defects in material and workmanship. The limited warranty covers only those
defects and/or product failures that arise as a result of normal use, and does not cover any problems
that originate from:
- Improper cleaning, care and maintenance
- Modications made to a product
- Operation outside the product’s published specications
- Damage caused by incorrect assembly
- Exceeding recommended operational limits
Ss Brewtech reserves the right to request the original purchaser to return the defective item, at the
purchaser’s expense, before processing the warranty claim and issuing a replacement. If a direct
replacement is no longer available, a product that serves the same purpose with equal or greater value
shall be awarded. Ss Brewtech, at its discretion may also opt to simply refund the full purchase price in
lieu of replacing the product.
Ss Brewtech limited warranty is only applicable to customer-direct sales of home brewing.
Ss Brewtech makes no warranty of any nature beyond what is contained in this limited warranty.
Ss Brewtech is not responsible for representations made about a product by another retailer.
REV 03032020
SsBrewtech.com
Autres manuels pour E-Kettle 304
2
Table des matières
Autres manuels Ss Brewtech Système de brassage
Ss Brewtech
Ss Brewtech Keg WaSsher Manuel utilisateur
Ss Brewtech
Ss Brewtech Jacketed Unitank Manuel utilisateur
Ss Brewtech
Ss Brewtech E-Kettle 304 Manuel utilisateur
Ss Brewtech
Ss Brewtech E-Kettle 304 Manuel utilisateur
Ss Brewtech
Ss Brewtech The Brew Bucket Manuel utilisateur
Ss Brewtech
Ss Brewtech Ssparge Arm Manuel utilisateur
Ss Brewtech
Ss Brewtech BREWMASTER Manuel utilisateur
Ss Brewtech
Ss Brewtech FTSs Pro Manuel utilisateur
Manuels Système de brassage populaires d'autres marques
Curtis
Curtis ThermoPro G4 Series Manuel utilisateur
Animo
Animo ComBi CB5 Manuel utilisateur
MoreBeer
MoreBeer BrewSculpture Manuel utilisateur
Keurig Hot
Keurig Hot Commercial Series Manuel utilisateur
Keg King
Keg King KEGMASTER XL Manuel utilisateur
Blichmann Engineering
Blichmann Engineering BrewEasy Compact TC Instructions d'installation