SRIXON Z355 Instructions d'utilisation


SRIXON.COM
SRIXON U.S.A.
5601 Skylab Rd., Huntington Beach, CA 92647, U.S.A.
Tel: 1-714-889-1300 Fax: 1-714-889-5890
SRIXON CANADA
19099 25th Ave. #104 Surrey. BC, V3S 3V2, Canada
Tel: 1-604-542-0911 Fax: 1-604-542-0955
SRIXON SPORTS EUROPE, LTD.
3, Newman Lane Industrial Estate, Alton, Hampshire,
GU34 2QR, UK.
Tel:44-(0)-1420-541709 Fax:44-(0)-1420-87899
SRIXON SPORTS AUSTRALASIA, PTY. LTD.
2/707 Forest Road, Peakhurst, PO Box 152, Peakhurst,
NSW 2210, Australia
Tel:61-(02)-9584-8111 Fax:61-(02)-9584-8339
SRIXON SPORTS SOUTH AFRICA (PTY) LTD.
Unit 6 Pentagon Park, Capital Hill Commercial Estate Le Roux
Road. Midrand, Johonnesburg South Africa
Tel:27-11-805-6339 Fax:27-11-805-0464
DUNLOP SPORTS CO. LTD.
3-6-9 Wakinohama-cho, Chuo-ku, Kobe, Hyogo 651-0072, Japan
TEL: +81-78-265-3200 FAX: +81-78-265-3135
SRIXON SPORTS ASIA SDN. BHD.
1 Jalan U1/32, Hicom Glenmarie Industrial Park, 40150 Shah Alam,
Selangor Darul Ehsan, Malaysia
Tel:60-3-5569-3438 Fax:60-3-5569-3436
SRIXON SPORTS (THAILAND) CO.,LTD.
952 Ramaland Bld. Fl#17, Rama IV Road, Suriyawongse, Bangrak,
Bangkok 10500 Thailand
Tel:66-(0)2-632-6630 Fax:66-(0)2-632-6633
CHANGSHU SRIXON SPORTS Co., LTD.
NO.9, Yangzijiang Road, ChangShu Economic Development Zone,
Jiangsu, China.
Tel:86-(0)-512-5269-2000 Fax:86-(0)-512-5269-2600
SRIXON SPORTS HONG KONG Co., LTD.
Unit 06, 11/F., SOLO Bldg., 41-43 Carnarvon Road, Tsimshatsui,
KLN, HK.
Tel:852-2316-2286 Fax:852-2316-2213
DUNLOP SPORTS KOREA CO.,LTD.
4th Fl, 76, Sapyeong-daero, Seocho-gu,
Seoul, 137-806, Korea
Tel:82-(2)-3462-3957 Fax:82-(2)-3462-5333

Instruction Manual /
Setting Adjustments

.
THANK YOU
FOR YOUR PURCHASE.
Our mission is to make you better. One shot, one round, one
weekend at a time. We can’t promise it will be overnight. No
one can. But we can say we’ll be there. With meaningful
innovations that start in the lab, not the marketing
department. We’re here to play, to challenge, to compete at
the highest level. We’re here for the Journey.
THE JOURNEY TO BETTER.

.
THANK YOU
FOR YOUR PURCHASE.
Our mission is to make you better. One shot, one round, one
weekend at a time. We can’t promise it will be overnight. No
one can. But we can say we’ll be there. With meaningful
innovations that start in the lab, not the marketing
department. We’re here to play, to challenge, to compete at
the highest level. We’re here for the Journey.
THE JOURNEY TO BETTER.

PART NAMES AND FEATURES
QTS sleeve
Accessories
Change position to set desired
face angle, lie angle, and loft angle
Z 355 Driver
Custom torque wrench
Part names and features P04
How to install and remove QTS sleeve P05
QTS Sleeve performance guide P09
QTS Sleeve position overview P11
Important Precautions! Please Read P13
How to install and remove QTS sleeve (sleeve installation) P07
Table Of Contents

PART NAMES AND FEATURES
QTS sleeve
Accessories
Change position to set desired
face angle, lie angle, and loft angle
Z 355 Driver
Custom torque wrench
Part names and features P04
How to install and remove QTS sleeve P05
QTS Sleeve performance guide P09
QTS Sleeve position overview P11
Important Precautions! Please Read P13
How to install and remove QTS sleeve (sleeve installation) P07
Table Of Contents

HOW TO INSTALL AND REMOVE QTS SLEEVE
Use this position when loosening
and tightening.
Hold the club upright with
the grip resting on the ground.
Supporting the head in your hand,
gently insert the torque wrench
into the screw hole.
Shaft and torque
wrench should
form a straight line
Improperly aligned
torque wrench
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Damaged QTS sleeve and/or improperly installed
QTS sleeve may result in injury or product damage.
* Not compatible with SRIXON Z-STAR series torque wrenches.
Position the torque wrench so that it is correctly aligned with the shaft.
Failure to insert the tip of the torque wrench firmly into the screw hole may
result in damage to the screw.
Using a golf club with a broken washer may damage the club head or the sleeve.
Always tighten until you hear a ‘click’.
Failure to tighten until you hear a ‘click’ may result in separation of the club
head or product damage.
Once you hear a ‘click’, stop tightening.
Over-tightening may damage the QTS sleeve.
Loosen Tighten
With the torque wrench
aligned with the shaft,
turn it counterclockwise.
With the torque wrench
aligned with the shaft,
turn it clockwise until
you hear a
‘click’.
When removing the QTS sleeve, be careful not to loosen the screw too much,
as you may drop the screw and lose the washer.

HOW TO INSTALL AND REMOVE QTS SLEEVE
Use this position when loosening
and tightening.
Hold the club upright with
the grip resting on the ground.
Supporting the head in your hand,
gently insert the torque wrench
into the screw hole.
Shaft and torque
wrench should
form a straight line
Improperly aligned
torque wrench
Do not use any tool other than the supplied torque wrench.
Also do not use the supplied torque wrench on any other products.
Damaged QTS sleeve and/or improperly installed
QTS sleeve may result in injury or product damage.
* Not compatible with SRIXON Z-STAR series torque wrenches.
Position the torque wrench so that it is correctly aligned with the shaft.
Failure to insert the tip of the torque wrench firmly into the screw hole may
result in damage to the screw.
Using a golf club with a broken washer may damage the club head or the sleeve.
Always tighten until you hear a ‘click’.
Failure to tighten until you hear a ‘click’ may result in separation of the club
head or product damage.
Once you hear a ‘click’, stop tightening.
Over-tightening may damage the QTS sleeve.
Loosen Tighten
With the torque wrench
aligned with the shaft,
turn it counterclockwise.
With the torque wrench
aligned with the shaft,
turn it clockwise until
you hear a
‘click’.
When removing the QTS sleeve, be careful not to loosen the screw too much,
as you may drop the screw and lose the washer.

HOW TO INSTALL AND REMOVE QTS SLEEVE (SLEEVE INSTALLATION)
Insert the shaft into the head QTS setting examples
The shaft may not insert fully if the position line
and sleeve mark are not correctly aligned.
Press the shaft all the way in until the QTS
sleeve is completely covered.
Align the position line with the
mark and press straight in.
* Illustration shows neutral position
For right position
(Open face)
For left position
(Closed face)
Align the mark on the head with the ‘R’
on the QTS sleeve and press straight in.
Align the mark on the head with the ‘L’
on the QTS sleeve and press straight in.
Check to see that the QTS sleeve is properly secured.
Tighten the sleeve until you hear a
‘click’. If you fail to properly secure
the sleeve, there is a possibility that
the head may come off in mid swing,
injuring either you or a bystander.
Table des matières
Autres manuels SRIXON Sport et plein air


















