SR Instruments SR300 Series Manuel utilisateur

Model –5000 Gram x 1 Gram Scale

Instruction Manual

Part No.: MAN320A_220314 Page 1 of 3

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SPECIFICATIONS

Max. capacity: 5,000g/175oz

Min. capacity: 5g/0.2oz

Division: 1g/0.1oz

Power source: 4-“AA” batteries

Accuracy: 0.2% +/- 1 digit of

displayed resolution for

calibrated range

FEATURES

Portability: Small and compact

Tare: Single button

Two units: Gram or ounce

Auto power off: 120 seconds

Warranty: Two (2) years

BATTERY INSERTION/

REPLACEMENT

1. Turn scale over. Remove the Battery

Compartment Cover by pressing the tab towards

the cover and lift it off.

2. Place four (4) –1.5-Volt batteries of AA size

into the battery compartment with correct

polarity.

3. Replace the Battery Compartment Cover.

SCALE ASSEMBLY

1. With the scale OFF, gently remove the top of

the scale by rotating the top counterclockwise.

2. Insert perch mounting screw through the hole in

the surface plate. Place Loctite® on screw.

Thread screw into bottom of the perch and

tighten in place.

3. Carefully align ridges in the platform top with

the notches in the weighing plate. Rotate

clockwise to lock top in place

TO OPERATE SCALE

1. Place scale on a flat surface in a sheltered area.

2. Press the “ON/OFF” button to turn the scale on.

3. Press “UNITS” button to select ounces/grams.

Scale is ready for use. Display will read “0” for

grams or “0.0” for ounces.

USING THE TARE FUNCTION

1. Place the scale on a flat surface in a sheltered

area.

2. Press the “ON/OFF” button to turn the scale on.

3. When “0” appears on the display, place the

empty container onto the weighing platform.

4. Press the “TARE” button and the display will

return to zero, eliminating the weight of the

container.

5. A “o” will appear in the lower left corner of the

display, which indicates that the TARE feature

is functioning.

6. Place the object to be weighed into the container

and obtain its net weight.

MANUAL POWER OFF

After use, turn the scale off by pressing the

“ON/OFF” button to prolong battery life.

AUTO POWER OFF FEATURE

The scale is also equipped with an “AUTO

POWER OFF” function. The scale will turn off in

approximately 120 seconds.

UNIT CHANGE FUNCTION

The default unit of measure is “g”. You can change

the scale unit of measure between grams “g” and

ounces “oz”.

1. Press the “ON/OFF” button.

2. Press the “UNITS” button to toggle between

grams and ounces.

Model –5000 Gram x 1 Gram Scale

Instruction Manual

Part No.: MAN320A_220314 Page 2 of 3

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

CAUTION TO BE EXERCISED

1. Place the scale in a sheltered area when in use.

Air movement on the scale may affect the

accuracy.

2. Always place object onto the platform gently.

DO NOT weigh objects exceeding the full

capacity as this may permanently damage the

scale. An “O-Ld” message will appear on the

display if the scale is over-loaded.

3. Replace batteries when the battery symbol

appears in the display when scale is turn on.

When batteries are extremely low, “LO” will

appear and unit will shut off.

CALIBRATION METHOD

1. With the scale OFF, PRESS the “ON/OFF”

button five (5) times and hold. Hold until a

random number appears.

2. Press the “ON/OFF” button. The display will

read “CAL”.

3. After 2 seconds, the display will read 4000

grams (do not use any other size weight as the

calibration will be altered).

4. Place the 4000 grams weight on the scale and

press the “ON/OFF” button. The display will

read “PASS”. Calibration is complete.

TWO (2) YEAR LIMITED WARRANTY

Ssystems are manufactured with high

quality components. SR Instruments, Inc. warrants

that all new equipment will be free from defects in

material or workmanship, under normal use and

service, for a period of two (2) years from the date

of purchase by the original purchaser. Normal wear

and tear, injury by natural forces, user neglect, and

purposeful destruction are not covered by this

warranty. Warranty service must be performed by

the factory or an authorized repair station. Service

provided on equipment returned to the factory or

authorized repair station includes labor to replace

defective parts. Goods returned must be shipped

with transportation and/or broker charges prepaid.

SR Instruments, Inc.’s obligation is limited to

replacement of parts that have been so returned and

are disclosed to SR Instruments, Inc.’s satisfaction

to be defective. The provisions of this warranty

clause are in lieu of all other warranties, expressed

or implied, and of all other obligations or liabilities

on SR Instruments, Inc.’s part, and it neither

assumes nor authorizes any other person to assume

for SR Instruments, Inc. any other liabilities in

connection with the sale of said articles. In no

event shall SR Instruments, Inc. be liable for any

subsequent or special damages. Any misuse,

improper installation, or tampering, shall void this

warranty.

CAUTION

The integrated circuits and semiconductors on the

printed circuit boards may be damaged by

electrostatic discharge (ESD). Be sure to use

proper handling precautions at all times.

Figure 1: Battery Compartment Cover

Battery

Compartment

Cover

Model –5000 Gram x 1 Gram Scale

Instruction Manual

Part No.: MAN320A_220314 Page 3 of 3

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SR300 SERIES GRAM SCALE CLEANING INSTRUCTIONS

CLEANING

To clean the scale contact areas:

Use a soft cloth dampened with water and mild detergent to clean scale surfaces.

Wipe surface with clean soft cloth dampened with water and then dry with clean soft cloth.

Do not use abrasive materials to clean scale surface to prevent damage to the surface finish.

Do not spray liquid directly onto scale surfaces. Use only a damp cloth.

DISINFECTION

To disinfect the scale contact areas:

Use a soft cloth dampened with disinfectant or a damp disposable disinfectant cloth. Cloth cannot be

dripping wet. Follow manufacturer’s instruction on the proper use of commercially available

disinfectants.

Disinfectant solutions with 1% sodium hypochlorite or 70% isopropyl alcohol are suitable for display /

user interface and other scale contact surfaces.

After disinfecting, use a soft cloth dampened with clean water and dry with a soft clean cloth to prevent

buildup of material on scale finish.

Do not use abrasive material to disinfect / clean scale surfaces to prevent damage to the surface finish.

Do not spray liquid directly onto scale surfaces. Use only a damp cloth.

WARNING: DO NOT SPRAY CLEANING SOLUTION OR LIQUIDS DIRECTLY ON

SURFACES TO BE CLEANED.

WARNING: EXPOSURE TO EXCESSIVE LIQUID WILL DAMAGE USER INTERFACE

KEYPAD.

WARNING: DO NOT USE PRESSURIZED WATER OR STEAM. THE SCALE SYSTEM

CONTAINS ELECTRONIC COMPONENTS THAT MAY BE ADVERSELY

AFFECTED BY EXPOSURE TO SUCH AN ENVIRONMENT.

Table des matières

Autres manuels SR Instruments Échelle

SR Instruments

SR Instruments SR Scales SR7005i-KG Manuel de service

SR Instruments

SR Instruments SR Scales SRV930 Manuel de service

SR Instruments

SR Instruments SR Scales SR7010i Manuel de service

SR Instruments

SR Instruments SR Scales SRV712W-2 Manuel de service

SR Instruments

SR Instruments SRSCALES SRV411i Manuel de service

SR Instruments

SR Instruments SR Scales SRV715 Manuel de service

SR Instruments

SR Instruments SR Scales SR7020i Manuel de service

SR Instruments

SR Instruments SR Scales SR463iR Series Manuel de service

SR Instruments

SR Instruments SR Scales SRV957IFS Manuel de service

SR Instruments

SR Instruments SR Scales SRV712W Manuel de service

SR Instruments

SR Instruments SR Scales SR555i Manuel de service

SR Instruments

SR Instruments SRScales SRV949 Manuel de service

SR Instruments

SR Instruments SRV710W Series Manuel de service

SR Instruments

SR Instruments SR Scales SRV716W Manuel de service

SR Instruments

SR Instruments ST Scales SRV930KG Series Manuel de service

SR Instruments

SR Instruments SRScales SRV713W Manuel de service

SR Instruments

SR Instruments SR Scales SRV945-BT Manuel de service

SR Instruments

SR Instruments SR Scales SRV947-BT Manuel de service

SR Instruments

SR Instruments SR300 Manuel utilisateur

SR Instruments

SR Instruments SRScales SR7000i Manuel de service

SR Instruments

SR Instruments SR300 Series Manuel utilisateur

SR Instruments

SR Instruments SR Scales SR630i-KG Manuel de service

SR Instruments

SR Instruments SR725 Manuel de service

SR Instruments

SR Instruments SRScales SR575 Manuel de service

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur