Mode1（Optical linearity）：As the DMX value increases, the increase in light intensity
tends to be linear；
Mode2（Square rate）：The light intensity is controlled to be fine at low values and thicker
at high values；
Mode3（Reverse squared rate）：The light intensity is controlled to be thicker at low
values and thinner at high values;
Mode4（S-Linear）：The light intensity is controlled to be finer at low values and high
values, and thicker at intermediate values.
Display setting
Enter MENU mode, select Display Settings, press ENTER button to confirm, select by
UP/DOWN: display reverse, backlight brightness, temperature unit or language.
Display Inverse
Select Display Inverse, press ENTER button to confirm, the current mode will be displayed
on the screen, through the UP/DOWN button to select: No (normal) or Yes (display reverse),
press the ENTER button to save. Press the MENU button to return to the previous menu or
wait 1 minute to automatically exit the menu mode.
Backlight Intensity
Select the backlight brightness, press the ENTER button to confirm, the current mode will be
displayed on the screen, press UP/DOWN to adjust the Backlight Brightness from 1 (black)
to 10 (bright) and press the ENTER button to save. Press the ENTER button to save. Press
MENU to return to the previous menu or wait for 1 minute to automatically exit the menu
mode.
Temperature unit
Select the temperature unit, press the ENTER button to confirm, the current mode will be
displayed on the display, through the UP/DOWN button to select: °C or °F, press the ENTER
button to save. Press MENU to return to the previous menu or wait for 1 minute
automatically exits the menu mode.
Language
Select the language, press the ENTER button to confirm, the current mode will be displayed
on the display, use the UP / DOWN button to select: Chinese or English, press the ENTER
button to save. Press MENU to return to the previous menu or wait for one minute
automatically exits the menu mode.
Fixture Test
Enter the menu mode, select the Fixture test, press the ENTER button to confirm, select
through the UP/DOWN button: automatic test, manual test.
Auto Test
Select the Auto Test, press ENTER to confirm, the machine will run the built-in program test
level, vertical, color, pattern Disc, pattern disc rotation, stroboscopic, dimming, prism disc,
prism disc rotation, atomization, focusing, etc. Press the MENU button to exit go back to
the previous menu or return to the menu mode after the test ends.
Manual Test
