All images are for illustration purposes only. Actual products may vary.
IMPORTANT SAFEGUARDS
Mini Chopper Instruction Manual
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1 Read all instructions carefully before using the appliance.
2 This appliance is intended for household use only.
It is not suitable for commercial use such as staff
kitchen areas and other working environments.
3 Ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top. Do not place
the appliance onto a metal tray or metal surface whilst in use.
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven. Do not operate the appliance with
wet hands or barefoot.
4 Keep the appliance and mains cable away from the edges of
work tops and out of reach of children. Route the cable so
it does not overhang, and cannot be tripped over or caught.
5 Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as a cooker. Heat may damage the mains cable.
6 The connections on both sides of the mains cable (the
appliance and socket) should never be strained. If the mains
cable is damaged it must be replaced by a qualified person or
service to avoid any hazards.
7 Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water or
other liquids to protect against fire, electric shock
and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9 This appliance must not be operated by an external timer or
a remote control system.
10 SQ Professional Ltd may not be held liable for eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
11 This appliance is not suitable for processing very
hard ingredients, such as ice cubes, coffee beans,
hard spices, grinding granulated sugar to caster
sugar, or processing hot liquids.
12 Only process small amount of food at a time.
13 Blades are very sharp, handle with care. Always
hold the blade 5at the top away from the cutting
edge when handling or cleaning.
14 Ensure safety cover 3and motor block 2are securely locked
in place before operating the appliance.
15 Switch off the appliance and unplug from the socket before
changing attachments or approaching parts that move while
in use. Unplug the appliance when not in use.
16 Ensure that the appliance has come to a complete stop
before cleaning and storing away. Keep the attachments,
motor block
, cable, and plug away from sources of heat.
Store in a dry place.
17 Do not use this appliance for any other purpose
than its intended use.
18 Use the glass bowl only with the motor block
supplied (and
vice versa) and do not tamper the motor block in any way.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE!
BEFORE FIRST USE
ALL PARTS OF THE APPLIANCE ARE TO BE THOROUGHLY CLEANED
BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION ON CLEANING).
BE CAREFUL WHEN HANDLING THE BLADE AS IT IS VERY SHARP.
BEFORE FIRST USE
1 Make sure your electricity supply is the same as the one
shown on the underside of the power unit.
2 Remove all the packaging and place the appliance on a dry,
flat, heat-resistant, non-flammable surface.
3 Wash and dry all the parts thoroughly (see ‘Cleaning’).
ASSEMBLY
1 Place the 8anti-slip rubber base on a flat, dry surface. Put
the 6glass bowl on the base.
2 Fit the blade 5on the drive shaft 7. Place ingredients in
the bowl.
3 Ensure that the sealing ring 4is attached to the safety cover
3and place the assembled cover onto the bowl.
4 Insert the motor block 2into the safety cover 3. Allign the
arrow on the motor block 2with the arrow on the safety
cover 3. The Mini Chopper will not operate unless the motor
block, safety cover and the bowl are correctly engaged.
5
