Spypoint TINY-HD Manuel utilisateur

Digital Surveillance Camera

Système de surveillance photographique

Fotografisches Überwachungs system

TINY-HD/TINY-7 model

Modèle TINY-HD/TINY-7

Modell TINY-HD/TINY-7

User manual /Manuel d'utilisation /

Bedienungsanleitung

www.spypoint.com

PINTSPY INTPSPY

TINY-HD TINY-7

English

v.1.7

English

Thank you for choosing the SPYPOINT®

TINY-HD/TINY-7 monitoring system. This manual will help

you get the most out of your new device. For the latest version

of this user manual or for additional information, visit our

website at www.spypoint.com.

English

FEATURES

Photo recording:

Photo resolution 7 MP (TINY-7)

8 MP (TINY-HD)

File format JPG

Time Lapse Predefined intervals from

30sec to 1h

Multi-shot Up to 6 pictures per detection

Stamp Date, time, temperature

and moon phase printed

on pictures

Capture mode Color by day,

black and white by night

Video recording:

Video resolution 640 x 480 (TINY-7)

1280 x 720 (720p) (TINY-HD)

File format AVI

Sequence length Adjustable from 10 to 90sec

Capture mode Color by day, black

and white by night

Sound recording: Automatically recorded

in video mode

Memory storage: SD/SDHC card up to 32 GB

(No internal memory)

Configuration/Viewing:

Built-in LCD screen 2.4'' configuration screen

(TINY-7)

2.4'' viewing screen

(TINY-HD)

TV output Composite video (PAL/NTSC)

Computer output USB 2.0

Power supply:

(accessories sold separately, see "Options")

Alkaline or lithium

batteries

6x AA

Lithium battery pack Rechargeable battery pack

(LIT-09/LIT-C-8)

External (12V jack) 12-volt battery

(KIT-12V/BATT-12V)

12-volt adapter (AD-12V)

English

Solar panel (12V jack) Solar panel (SP-12V)

combined with rechargeable

battery pack (LIT-09/

LIT-C-8)

Detection system:

Motion sensor PIR

Detection angle of the

main sensor

30°

Detection angle of the

side sensors

70°

Detection range Adjustable from 5 to 50ft

Delay between each

detection

Adjustable from 1 to 30min

*Additional 10 sec. setting

(see DELAY)

Electricity mode

(Connected to a 12V DC

Main source only)

Instant trigger time

External trigger 1/8" jack for normally

open contact

Night time illumination system:

LEDs 38 LEDs

Type Invisible Black LEDs (TINY-7)

Infrared LEDs (TINY-HD)

Exposure Automatic infrared level

adjustment

BUSY

Optical field of view: 40°

Recommendations:

Operating temperature (-20 °C to + 50 °C)

(-4 °F to +122 °F)

Storage temperature (-30 °C to + 75 °C)

(-22 °F to +167 °F)

KIT INCLUDES

• SPYPOINT®TINY-HD/TINY-7

• Installation strap

• USB Cable

• Audio/video Cable

• User manual

REAR VIEW

English

BOTTOM VIEW

1. Power button

2. LED recording indicator

3. UP button

4. BACK button

5. OK button

6. DOWN button

7. ALK / RECH (switch for battery)

8. SD card slot

9. USB port

10. 12-volt jack

11. External trigger jack

12. TV OUT

13. Removable battery case

10.9. 11.

13.

12.

ConnectorConnector

Top

POWER

The battery level is shown in the REPORT mode.

(4/4 = full, 1/4= low) When the battery level shows 2/4,

the camera will continue to take pictures but we strongly

recommend changing the batteries before they are empty.

AA batteries

This camera requires the use of 6 AA batteries (1.5V). The

use of alkaline or lithium batteries is strongly recommended.

During the installation of the AA batteries, slide the switch

inside the battery case to ALK. Insert the batteries in the

battery case as indicated and insert it inside the camera (see

figure below). Exact polarity must be followed. We also

recommend the use of new batteries to ensure maximum

performance of your camera.

10 11

English

Lithium battery pack

This camera SPYPOINT®can be powered by a rechargeable

lithium battery pack LIT-09/LIT-C-8 (sold separately, refer to

the section OPTIONS). This type of battery is less affected

by cold temperatures and lasts up to 3 times longer than an

alkaline battery. During the installation of the lithium battery

pack, slide the switch inside the battery case to RECH. Insert

the battery in the case as indicated and insert it inside the

camera (see figure below)

PINTSPY

INTPSPY

ConnectorConnector

Top

PINTSPY

INTPSPY

ConnectorConnector

TO INSERT THE BATTERY CASE INSIDE

THE CAMERA

External (12V)

This camera can also be powered from an external 12-volt

DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold

separately) or a 12-volt adapter (AD-12V, sold separately).

During the installation of a 12-volt connection, slide the switch

inside the battery case to ALK (the AA batteries can remain

safely inside the camera). If combined with a lithium battery

pack, slide the switch to RECH. For the accessories available,

refer to the section OPTIONS.

12 13

English

Solar panel

This model also offers the possibility of a connection to

a solar panel SP-12V (sold separately, refer to the section

OPTIONS) to maintain the charge of the lithium battery

(sold separately, refer to the section OPTIONS). During the

installation of the rechargeable lithium battery pack, slide

the switch inside the battery case to RECH to activate the

charging system of the solar panel.

Power source Switch position

• 6AA

• 12V

• 12V + 6AA

ALK

• LIT-09

• 12V + LIT-09

• Solar panel + LIT-09

RECH

MEMORY CARD

Using a memory card (sold separately, refer to the section

OPTIONS) is required to operate the camera. When the

camera is turned on, the screen displays "Insert memory

card" in PHOTO, VIDEO or TEST mode if no memory card

is used, the camera also beeps. The camera is compatible

with SD/SDHC memory card, up to 32 GB capacity. Before

inserting or removing the memory card, the camera must

be turned off. Failing to do so may cause loss of or damage

the pictures already recorded from the memory card. When

the SD card is full, the viewing screen indicates "Disk full"

when PHOTO, VIDEO or TEST mode are selected. The

following data shows an approximate quantity of photos or

video length that can be taken by the camera depending on

the memory card capacity.

RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB

3 MP

5 MP

7 MP

8 MP

2000

1700

1400

1200

4100

3400

2700

2400

8200

6800

5500

4800

32800

27300

21800

19000

VIDEO

RESOLUTION

2.0Go 4.0Go 8.0Go 32Go

640 x 480

1280 x 720 (720p)

65 min

20 min

2h10

40 min

4h10

1h20

16h40

5h20

"BUSY" LED

The "BUSY" light, located beside the LCD screen, lights up

when the camera records a file.

14 15

English

TEST

To set the camera or the distance. When TEST mode is

selected, no picture or video is recorded. Walk perpendicularly

in front of the camera. When the camera detects movement,

the light winks to indicate that normally, a photo or video

would have been recorded. If the system does not detect

the movement, increase the distance detection using the

"Settings" menu (the option "Sensitivity" allows the user to

set the sensitivity to "High", "Medium" or "Low"). You can

also realign the camera differently. Once you understand how

the device responds to detections, you can better adjust the

direction or the height of the camera.

In TEST mode, it is possible to take a picture by pressing

the OK button. The photo is saved and appears in the

VIEW mode.

How to properly install your camera

using the supplied installation strap:

(Recommended installation height: about 3 feet).

PROGRAMMING

Turn on the camera to navigate in the interface by

pressing or and press OK for selection. To modify the

selection, press and again and press OK to confirm. To

return to the previous menu press .

PHOTO

To take pictures. The PHOTO mode must be selected by

pressing OK; the test light in front of the camera will flash

for 60 seconds to allow the operator to walk away from the

camera without being photographed.

VIDEO

To take videos. The VIDEO mode must be selected by

pressing OK; the test light in the front of the camera will

flash for 60 seconds to allow the operator to walk away from

the camera without being recorded.

TINY-W2s

Test light

16 17

English

SETTINGS

To define the options of the camera. To set the system in

English, hold the button until "Language" is highlighted.

Press OK, select "English" and confirm your choice with

OK. The system will than change all the menus to English.

Time Start /

Time Stop:

Allow the user to set the period of

operation of the camera. The start and stop

time are the hours during the camera is

in action and records pictures or videos.

Example: if the user selects a start time

"7:00 am" and a stop time "11:00 am",

the camera will only detect for that period

of time and will stay inactive for the

remaining hours. Press OK and use or

to adjust the hour. Press again OK to set

the minutes. When the time is properly set,

press OK once more to go back.

For an activation of 24 hours, the same

start and stop time must be entered

(example: 00:00 as start time and 00:00

as stop time. These hours are the basic

settings of your camera)

Note: The hours can be recorded over a

12 or 24 hours period. Refer to "Setting"/

"Time format" (00:00 means midnight).

Delay:

(10s/1m/3m/5m/

10m/15m/30m)

Select the time interval between photos or

videos.

Additional setting: It is possible to

decrease the delay between detections to

10 seconds (instead of 1 minute) by using

the following procedure. Note that the

battery life will be affected.

Turn OFF the camera. Press and hold the

button and turn the camera ON . "10sec

enabled" appears on the screen meaning

the minimum delay is now 10 seconds.

If this option is used, the 30 minute delay

disappears. To reset the camera to 1

minute delay, follow the same procedure.

"10sec disabled" appears on the screen

(see figure below)

Multi-shot:

(1/2/3/4/5/6

consecutive

shots)

Take up to 6 consecutive shots at each

detection, with a 10 second delay between

each photo. This option allows up to 6

pictures from different angles when the

camera is in PHOTO mode.

10SEC DISABLED10SEC ENABLED

10 sec delay 1 min delay

18 19

English

Video

length:

(10s/30s/60s/90s)

Allow the user to select the recording time

when the camera is set in VIDEO mode.

Language:

(English/Français/

Deutsch/Italiano)

Select a language for the camera menus.

Sensitivity:

(High/Medium/

Low)

Allow the user to choose between three

different levels of sensitivity: "High",

"Medium" or "Low". The camera will

only detect sources of heat in movement.

Make sure to have the least possible

objects in front of the camera during the

positioning. This prevents picture taken

by the camera when oriented towards the

sun while an object moves in front of the

camera (e.g. a branch)

Date: Set the date as Month/Day/Year

Time

format:

(12h/24h)

Allow the user to choose between a 12

or 24 hours period time displays on the

photos (eg. 6:00 pm or 18:00)

Time: Set the time as Hour/Minute

Stamp:

(Yes/No)

Select or cancel printing the date, time,

temperature and moon phases on photos.

New moon:

Waxing Crescent:

First Quarter:

Waxing Gibbous:

Full moon:

Waning Gibbous:

Last Quarter:

Waning crescent:

Resolution:

(High/Medium/

Low)

Set the photo resolution.

High: 7 MP (TINY-7)

8 MP (TINY-HD)

Medium: 5 MP

Low: 3 MP

Temperature:

(°C/°F)

Select the temperature display in °F or °C.

Continuous:

(Yes/No)

Allow the user to take pictures or videos

even if the memory card is full. The

camera will continue to record photos or

videos by deleting the first recorded files.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Spypoint Caméra de sécurité

Spypoint

Spypoint IR-A Manuel utilisateur

Spypoint

Spypoint ECLYPSE Manuel utilisateur

Spypoint

Spypoint HAWK Manuel utilisateur

Spypoint

Spypoint Pro-X Manuel utilisateur

Spypoint

Spypoint TINY-W2 Manuel utilisateur

Spypoint

Spypoint IR-A Manuel utilisateur

Spypoint

Spypoint IR-8 Manuel utilisateur

Spypoint

Spypoint BF-6 Manuel utilisateur

Spypoint

Spypoint IR-7 Manuel utilisateur

Spypoint

Spypoint IR-A Manuel utilisateur

Spypoint

Spypoint IR-6 Manuel utilisateur

Spypoint

Spypoint HD-7 Manuel utilisateur

Spypoint

Spypoint I-6 Manuel utilisateur

Spypoint

Spypoint Bloodline Special Edition Manuel utilisateur

Spypoint

Spypoint TINY-W2 Guide de démarrage rapide

Spypoint

Spypoint Pro-X Plus Manuel utilisateur

Spypoint

Spypoint IR-B Manuel utilisateur

Spypoint

Spypoint IR-10 Manuel utilisateur

Spypoint

Spypoint LINK-EVO Instructions d'utilisation et d'entretien

Spypoint

Spypoint TINY-WBF Manuel utilisateur

Spypoint

Spypoint FL-8 Manuel utilisateur

Spypoint

Spypoint IR-C Manuel utilisateur

Spypoint

Spypoint HD-7 Manuel utilisateur

Spypoint

Spypoint HD-12 Guide de démarrage rapide

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur