Spyder Auto PRO-YD-CS99 Series Manuel utilisateur
*Please Note*
If you are unfamiliar with the installation processes,
professional installation is highly recommended.
1) Open the hood.
INSTALLATION GUIDE:
PRO-YD-CS99-(ALL COLORS)
3) Unseat the OEM head light. 4) Disconnect the high beam and low beam wiring
harnesses.
2) Unlock the two retainer stakes by swinging them
outward, then pull them up to release the headlight.
6) Transfer the high beam bulb to your Spyder
headlight.
7) Connect the high beam and low beam harnesses
to your Spyder headlight.
9) Reinstall the two retainer stakes by pushing
them down through the holes, then lock them into
place.
10) Close the hood and enjoy your new Spyder
headlights.
8) Seat the Spyder headlight.
5) Remove the high beam bulb from the OEM head-
light. Never touch exposed bulbs with bare hands.
For further help with installation, please watch our installation video. Follow the direct
link below to our YouTube channel for more information.
http://youtu.be/_lkBqnbYiLk
Table des matières
Autres manuels Spyder Auto Accessoires automobiles
Spyder Auto
Spyder Auto PRO-YD-CCO04 Series Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-CM04 Series Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-CS03-AM Series Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-DINT98-HL Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-DR02 Series Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-CS07 Manuel utilisateur
Spyder Auto
Spyder Auto PRO-YD-C300C-HL Manuel utilisateur
