
How to Record a Voice Activated AUDIO file:
●Make sure the headphones/data cable is unplugged
●Slide the Switch to the ON position
●ARED LED light will turn ON
● Press and Hold the ( - ) button until the red led turns off.
●A Voice activation recording has begun
●When finished recording slide the Switch to the OFF position to end the recording.
●Wait 10 seconds before making another recording.
NOTE: Voice activation will not extend the battery life of the device
NOTE: If the device runs out of power during the recording, it will finalize and save the
file before the battery dies
How to Record an audio file while being Plugged in and Charging:
● Make sure the headphones/data cable is unplugged.
●Slide the Switch to the ON position
● A RED LED light will turn ON and begin recording
● Once turned on, plug the cable into the recorder then into your USB charger or computer
●Press and Hold both the ( + ) and ( - ) button together until the red LED indicator turns
off.
● Once the red LED light has turned off a recording has begun
How to Playback file on the Device:
● Make sure the device is turned OFF first
● When in the off position, plug in your headphones.
●Slide the switch into the ON position.
● Solid light = Standby mode, and the device will begin playing an audio file
● Next to the solid light is a ( - ) and ( + ) button
●Hold the ( - ) and ( + ) button for 2 seconds to switch the device from the Music folder to
Recorded files folder.
● The music folder contains a SpyCentre audio file, to switch over to your recorded files
Hold the ( - ) and ( + ) button for 2 seconds
● To skip to the next files press the ( + ) button.
● To change the VOLUME Press and HOLD the ( + ) or ( - ) button.
NOTE: Files are not deletable through the device directly. In order to delete the files
follow the next steps: