SPX RADIODETECTION RD5100 H2O+ Manuel utilisateur

RD5100™H2O+

Precision water and gas industry

pipe locator and transmitter

Operation manual

90/5100H20+OPMAN-ENG/01

 RD5100H2O+ Operation Manual 
 
© 2018 Radiodetection Ltd 1 
Table of Contents 
Section 1 Preface......................................... 2 
1 Important notices.........................................2 
2 Compliance..................................................3 
3 Intellectual property .....................................3 
Section 2 Introduction................................. 4 
1 About this manual........................................4 
2 About the RD5100H2O+...............................4 
3 Extended warranty.......................................4 
4 eCertTM ........................................................4 
5 Manual outline .............................................4 
6 Safety..........................................................4 
7 Training .......................................................5 
Section 3 System overview......................... 7 
1 RD5100H2O+ locator...................................7 
2 RD5100H2O+ transmitter.............................9 
3 Using the locator and transmitter menu .......9 
Section 4 Operation....................................11
1 First use.....................................................11 
2 Power on / off ............................................14 
3 Keypad actions & shortcuts .......................14 
4 Locate modes............................................15 
5 System setup.............................................15 
6 Dynamic Overload Protection™.................16 
7 TruDepth™ measurement .........................16 
8 StrikeAlert™................................................16 
9 Backlight....................................................17 
10 Bluetooth wireless....................................17 
11 Transmitter power output.........................17 
12 Transmitter Eco mode..............................17 
13 Measure mode.........................................18 
Section 5 Locating cables and pipes........19
1 Frequencies...............................................19 
2 Locate modes............................................20 
3 Compass ...................................................21 
4 Trace.........................................................21 
5 Sweep and search.....................................21 
Section 6 Depth and current readings......23 
1 TruDepth™................................................23 
2 Verifying depth measurements ..................24 
3 Current readings........................................24 
Section 7 Locating techniques..................27 
1 Identifying target utilities ............................27 
2 Signal & ground connection.......................28 
3 Double-ended connections........................28 
Section 8 Using accessories .....................29
1 About accessories .....................................29 
2 Headphones..............................................29 
3 Transmitter clamps....................................29 
4 Sondes......................................................30 
Section 9 Current Direction (CD).............. 33 
1 Understanding CD.....................................33 
2 CD reset....................................................34 
Section 10 Bluetooth wireless connections
..................................................................... 35 
1 Switching Bluetooth On ...........................35 
2 Switching Bluetooth off............................35 
3 Pairing to a transmitter.............................35 
4 Bluetooth standby mode..........................36 
5 Troubleshooting.......................................36 
Section 11 iLOC ......................................... 38 
1
 Using 
iLOC...............................................38 
2 iLOC functions.........................................38 
3 SideStep™ ..............................................39 
Section 12 Appendices.............................. 40 
1 Care and maintenance ............................40 
2 Enhanced Self-Test.................................40 
3 RD5100 Manager™.................................40 
4 Warranty and extended warranty.............41 
5 Upgrading software .................................41 
6 eCertTM ....................................................41 
7 List of supported accessories ..................42 
8 RD5100H2O+ Package part numbers .....45 
 
 
 

RD5100H2O+ Operation Manual

Section 1 Preface

Before you begin

Thank you for your interest in Radiodetection’s

RD5100™H2O+ cable and pipe locator.

The RD5100H2O+ delivers the latest in locating

technology in a powerful yet ergonomic and light-weight

design.

Please read this user manual in its entirety before

attempting to use the RD5100H2O+ system.

Radiodetection products, including this manual, are

under continuous development. The information

contained within is accurate at the time of publication;

however the RD5100H2O+, this manual and all its

contents are subject to change.

Radiodetection Limited reserves the right to modify the

product without notice and some product changes may

have taken place after this user manual was published.

Contact your local Radiodetection dealer or visit

www.radiodetection.com for the latest information about

the RD5100H20+ product family, including this manual.

1.1 Important notices

General

The performance of any cable and pipe locator may be

affected when used in close proximity to ferrous materials

such as manhole covers, steel-toe boots, mobile phones

and nearby vehicles. Keep a distance of 1 or 2m from

these objects when taking critical measurements such as

depth and current readings.

This instrument, or family of instruments, will not be

permanently damaged by reasonable electrostatic

discharge and has been tested in accordance with IEC

801-2. However, in extreme cases temporary malfunction

may occur. If this happens, switch off, wait and switch on

again. If the instrument still malfunctions, disconnect the

batteries for a few seconds.

Safety

WARNING: Failure to comply with safety warnings

can cause serious injury or death.

CAUTION: Failure to comply with safety cautions can

result in damage to equipment or property.

This equipment must be used only by suitably qualified

and trained personnel, and only after fully reading this

Operation Manual.

WARNING: Direct connection to live conductors is

POTENTIALLY LETHAL. Direct connections to live

conductors should be attempted by fully qualified

personnel only using the relevant products that allow

connections to energized lines.

WARNING: The transmitter is capable of outputting

potentially lethal voltages. Take care when applying

signals to any pipe or cable and be sure to notify other

technicians who may be working on the line.

WARNING: Reduce audio level before using

headphones to avoid damaging your hearing.

WARNING: This equipment is NOT approved for use

in areas where hazardous gases may be present.

WARNING: Before removing the transmitter battery

pack, switch off the unit and disconnect all cables.

WARNING: The RD5100H2O+ locator will detect

most buried conductors but there are some objects,

including live objects, which do not radiate any detectable

signal. The RD5100H2O+, or any other electromagnetic

locator, cannot detect these objects so proceed with

caution. There are also some live cables which the

RD5100H2O+ will not be able to detect in Power mode.

The RD5100H2O+ does not indicate whether a signal is

from a single cable or from several in close proximity.

CAUTION: The battery cover, the accessory cover and

the headphone cover protect the locator’s sockets from

debris and water ingress. If they get damaged or lost,

contact Radiodetection or your local service

representative for a replacement one.

Batteries

WARNING: Batteries can get hot after prolonged use

at full output power. Take care while replacing or

handling batteries.

WARNING: Do not tamper with, or attempt to

disassemble the battery packs.

CAUTION: If battery failure is suspected return the entire

unit to an authorized repair center for investigation and

repair. Local, national or International Air Transport

Association (IATA) transport regulations may restrict the

shipment of faulty batteries. Check with your courier for

restrictions and best practice guidelines. Your local

Radiodetection representative will be able to direct you to

our authorized repair centers.

WARNING: Exposing the battery to a high

temperature above 60°C (140°F) may activate safety

systems and cause a permanent battery failure.

RD5100H2O+ Operation Manual

Disposal

This symbol on the product, accessories or

literature indicates that the product and its

electronic accessories (for example, charger,

headset and USB cable) must not be treated as

domestic waste, but must be disposed of

professionally. It is your responsibility to dispose of your

waste equipment by handing it over to a designated

collection point for the recycling of waste electrical and

electronic equipment. The separate collection and

recycling of your waste equipment at the time of disposal

will help to conserve natural resources and ensure that it

is recycled in a manner that protects human health and

the environment. For more information about where you

can drop off your waste equipment for recycling, please

contact your local city office, your disposal service or

product supplier.

Please dispose of this device in a manner appropriate to

the relevant legal requirements at the end of its product

life.

Batteries should be disposed of in accordance with your

company’s work practice, and / or the relevant laws or

guidelines in your country or municipality.

1.2 Compliance

EU Compliance

This equipment complies with the following EU

Directives:

RED (Radio Equipment Directive): 2014/53/EU

EMC (Electromagnetic Compatibility Directive):

2014/30/EU

EMF (Electromagnetic Fields Directive):

1999/519/EC

ROHS (Restriction of Hazardous Substances

Directive): 2011/65/EU

WEEE (Waste Electrical and Electronic Equipment

Directive): 2012/19/EU.

FCC Compliance Statement

This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

The equipment may not cause harmful

interference

The equipment must accept any interference

received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply

with the limits for a Class A digital device pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in

which case you will be required to correct the

interference at your own expense.

Modifications: Any modifications made to this

equipment not approved by Radiodetection may void the

authority granted to the user by the FCC to operate this

equipment.

Industry Canada Compliance Statements

ICES-003 Class A Notice:

This Class A digital apparatus complies with

Canadian ICES-003.

Avis NMB-003, Classe A:

Cet appareil numérique de la classe A est

conforme à la norme NMB-003 du Canada.

1.3 Intellectual property

Radiodetection is a subsidiary of SPX Corporation. SPX

is a trademark of SPX Corporation, Inc. Radiodetection

and RD5100H2O+ are registered trademarks of

Radiodetection in the United States and/or other

countries.

Trademarks and Notices. The following are trademarks of

Radiodetection: RD5100, SideStep, Dynamic Overload

Protection, eCert, TruDepth, RD Manager, Peak+,

StrikeAlert. The design of the RD5100H2O+ locators and

transmitters has been registered. The design of the 4

chevrons has been registered.

The Bluetooth word, mark and logos are registered

trademarks of Bluetooth Sig, Inc. and any use of such

trademarks by Radiodetection is under license. Windows

and Windows XP are either registered trademarks or

trademarks of Microsoft Corporation in the United States

and / or other countries.

Due to a policy of continued development, we reserve the

right to alter or amend any published specification without

notice. This document may not be copied, reproduced,

transmitted, modified or used, in whole or in part, without

the prior written consent of Radiodetection Ltd.

RD5100H2O+ Operation Manual

Section 2 Introduction

2.1 About this manual

This manual provides cable and pipe survey

professionals with comprehensive operating instructions

for the RD5100™H2O+ locator and transmitter system.

Before operating the RD5100H2O+ system it is very

important that you read this manual, noting all safety

warnings, cautions and procedures.

Additional documentation

The full product specification and RD5100 Manager

manual are available to download from

www.radiodetection.com.

2.2 About the RD5100H

O+

The RD5100H2O+ locator is ergonomically designed to

provide the operator with a balanced, light weight tool

that encourages extended use in most environments.

A wide range of accessories are available to enhance the

performance and to add extra functionality.

For more information about the Precision Locate

Accessories Range, visit:

www.radiodetection.com/accessories

2.3 Extended warranty

RD5100H2O+ locators and transmitters are covered by a

one year warranty as standard.

Users can extend the warranty period to a total of three

years by registering their products (locators and

transmitters) within three months from purchase.

Registration is performed using the RD5100 Manager PC

software. See Section 12.3 for further details.

From time to time Radiodetection may release new

software to improve the performance or add new

functionality to products. By registering the user will have

the option of subscribing to e-mail alerts advising about

any new software and special offers related to its product

range.

Users can opt out any time from receiving software and

technical notifications or just from receiving marketing

material.

2.4 eCert

The RD5100H2O+ has been designed so that it does not

require regular calibration. However, as with all safety

equipment, it is recommended that a service should be

carried out at least once a year either at Radiodetection’s

service center or an approved Radiodetection service

center. Alternatively eCertTM may be used to validate the

calibration of the RD5100H2O+ locator.

eCert is a novel Radiodetection technique that allows the

user to validate the original factory calibration of the

RD5100H2O+ locator, providing the user with the

confidence that the locator continues to meet its original

factory calibration. eCert also carries out a functional test

on the locator providing the user with the confidence that

the locator continues to provide the same performance

as it did when it first left the factory. eCert can be carried

out on site without the need to return the locator to a

service center, saving time and expense. Each time the

locator passes eCert, the user can view or print a dated

eCert validation certificate.

A detailed explanation of eCert is provided in Section

12.6.

2.5 Manual outline

Section 1 includes an overview of safety procedures and

notices. Review them before moving on to Section 2 and

the rest of this manual.

Section 2 provides an introduction to the RD5100H2O+.

Section 3 provides an overview of the RD5100H2O+

system with annotated diagrams of the locator and

transmitter.

Section 4 introduces basic setup and operation using the

RD5100H2O+ locator’s menu system.

Section 5 introduces the theory and practice of cable and

pipe location using the RD5100H2O+ locator and

transmitter.

Section 6 introduces depth and current readings.

Section 7 provides general locating tips.

Section 8 introduces the range of accessories that are

compatible with the RD5100H2O+ system.

Section 9 includes several appendices with reference

material and other technical information.

2.6 Safety

Read this manual in its entirety before attempting to

operate the RD5100H2O+ locator or transmitter. Note all

safety notices in the preface and throughout this manual.

You are responsible for determining whether the

conditions are suitable for using this device. Always carry

out a risk assessment of the site to be inspected.

RD5100H2O+ Operation Manual

Follow your company and national safety procedures and

or requirements when operating this equipment in any

environment or workplace. If you are unsure what

policies or procedures apply, contact your company or

site’s occupational health and safety officer or your local

government for more information.

Do not use this equipment if you suspect that any

component or accessory is damaged or faulty.

Before inserting the earth stake into the ground, ensure

there are no shallow cables or services that could be

damaged by the earth stake.

Use authorized accessories only. Incompatible

accessories may damage the equipment or give

inaccurate readings.

If you intend to uncover a sub-surface utility by digging,

you must follow your company, region and country’s

codes of practice for excavation.

Keep this equipment clean and arrange for regular

services with an authorized Radiodetection service

center. More information can be found in the Appendix or

from your local Radiodetection representative.

It is important to regularly clean and sanitize products

which may become contaminated through contact with

foul water or other contaminants.

Headphone use: you need to remain alert to traffic and

other hazards that are normally heard outdoors. Always

turn the volume down before plugging headphones into

an audio source and use only the minimum level,

necessary to take your measurements. Excessive

exposure to loud sounds can cause hearing damage.

Do not attempt to open or dismantle any part of this

equipment unless directed specifically by this manual.

Doing so may render the equipment faulty and may void

the manufacturer’s warranty.

You are responsible for determining whether you

consider the measurement results to be valid and for any

conclusions that are reached or any measures that are

taken as a result thereof. Radiodetection can neither

guarantee the validity of any measuring results nor can

we accept liability for any such results. We are on no

account able to accept liability for any damage which

may be caused as a consequence of the use of these

results. Please see the Standard Warranty Terms

enclosed with the product for further information.

2.7 Training

Radiodetection provides training services for most

Radiodetection products. Our qualified instructors will

train equipment operators or other personnel at your

preferred location or at Radiodetection headquarters.

For more information go to www.radiodetection.com or

contact your local Radiodetection representative.

RD5100H2O+ Operation Manual

Figure 3-1: RD5100H2O+ locator

RD5100H2O+ Operation Manual

Section 3 System overview

3.1 RD5100H

O+ locator

Refer to Figure 3-1.

Locator features

1 Keypad.

2 Bluetooth®module antenna.

3 Liquid Crystal Display (LCD) with backlight.

4 Battery compartment.

NOTE: The RD5100H2O+ is supplied with non-

rechargeable D type batteries. It is possible to use a

Li-Ion rechargeable battery pack by purchasing the

optional battery compartment from Radiodetection.

5 Headphone jack.

6 Accessory socket.

7 Mini USB-B socket (Internal to battery compartment).

8 Speaker.

Locator keypad

9 Power key : Switches the unit on and off. Provides

access to the set-up options menu.

10 Up arrow key : Increase gain (in power and radio

modes).

11 Backlight sensor: Provides automatic control of the

LCD display backlight.

12 Transmit key : Send an iLOC command to a

paired transmitter.

13 Target Position Indicator (TPI) key : Turn TPI

mode On/Off.

14 Down arrow key : Decrease gain (in power and

radio modes).

15 Frequency key : Scroll through frequencies from

low to high.

Locator display icons

16 Battery icon: Indicates the battery level.

17 Signal strength bargraph with peak marker.

18 Volume level.

19 Current direction arrows.

20 Null / Proportional Left/Right arrows: Indicates the

location of the target relative to the locator.

21 Signal strength readout.

22 Antenna mode icon:

Indicates mode selection (Guidance / Peak).

23 Sonde icon: Indicates that a sonde signal source is

selected.

24 Transmitter communication status –confirms

successful iLOC™ communication.

25 Transmitter standby indicator.

26 Line icon: Indicates that a line signal source is

selected.

27 Depth: Indication of depth reading.

28 Bluetooth status icon: A flashing icon means pairing

is in progress. A solid icon indicates a connection is

active.

29 Compass: Displays the direction of the cable or pipe

relative to the locator.

30 Measured values: Frequency or current readout

(mode dependent).

31 Current Detection (CD) mode icon.

32 Power mode icon.

33 Radio mode icon.

34 Sensitivity readout.

RD5100H2O+ Operation Manual

Figure 3-2: RD5100H2O+Tx transmitter

RD5100H2O+ Operation Manual

3.2 RD5100H

O+ transmitter

Transmitter features

1 LCD.

2 Keypad.

3 Bluetooth® module.

4 Removable accessory tray.

5 Side support.

6 Speaker (internal).

7 D-cells battery holder.

8 Optional Lithium-Ion rechargeable battery pack.

Accessory tray contents

9 Earth stake: Spiral earth stake.

10 Magnet: Hi-strength magnet with M4 eyebolt.

11 Earth lead: Earth spool 10m.

12 Direct connection lead: Transmitter direct connection

lead.

Transmitter keypad

13 Power key : Switches the unit on and off.

Opens the transmitter menu.

14 Frequency key : Selects frequency.

Menu navigation key.

15 Measure key : Used to take voltage and

impedance measurements.

Opens a sub menu.

16 Down arrow key: Adjusts the output signal level.

Scrolls through the menu options.

17 Up arrow key: Adjusts the output signal level.

Scrolls through the menu options.

Transmitter screen icons

18 Battery icon: Indicates the battery level.

19 Standby icon: Appears when the transmitter is in

Standby Mode.

20 Output level: Displays an indication of transmitter

output power as a bargraph.

21 Clamp icon: Indicates when a signal clamp or other

accessory is connected.

22 Bluetooth®icon: Indicates status of Bluetooth.

23 Voltage warning indicator: Indicates that the

transmitter is outputting potentially hazardous voltage

levels.

24 Volume icon: Displays the volume level.

25 Output power level: Displays the output power in

watts or as a percentage.

26 Resistance measurements: Displays the resistance

or current in Direct Connection mode.

27 Alphanumeric description of selected operation

mode.

28 Accessory or Measurement indicators: Indicates if an

accessory is connected or if measure mode is active.

29 Induction indicator: Appears when the transmitter is

in Induction mode.

30 CD mode: Indicates that the transmitter is in Current

Detection mode.

31 A-Frame: Indicates when the transmitter is in Fault-

Find Mode.

32 DC icon: Appears when the transmitter is powered

from a DC source.

3.3 Using the locator and

transmitter menu

The RD5100H2O+ locator and transmitter menus allow

you to select or change system options. Once entered,

the menu is navigated using the arrow keys. Navigation

is consistent on both the transmitter and the locator. In

the menu the options will appear in the bottom left-hand

corner of the display.

Note. When you browse the locator menu, the and

keys act as left and right arrows. When browsing the

transmitter menu the and keys act as left and right

arrows. The right arrow enters a submenu and the left

arrow selects the option and returns to the previous

menu.

Navigating the locator menu

1 Press the key to enter the menu.

2 Use the or keys to scroll through the menu

options.

3 Press the key to enter the option's submenu.

4 Use the or arrows to scroll through the

submenu options.

5 Press the key to make a selection and return to

the previous menu.

6 Press the key to return to the main operation

screen.

Table des matières

Autres manuels SPX Capteur de sécurité

SPX

SPX Radiodetection RD8100 Manuel utilisateur

SPX

SPX Radiodetection RD8200 Manuel utilisateur

SPX

SPX Radiodetection RD7100 Manuel utilisateur

SPX

SPX Radiodetection RD8200 Manuel utilisateur

SPX

SPX RADIODETECTION RD8200SG Manuel utilisateur

SPX

SPX Radiodetection RD8100 Manuel utilisateur

SPX

SPX Sensory Trainers Manuel d'instructions

SPX

SPX TIF Heated Pentode TIFZX Manuel utilisateur

SPX

SPX Radiodetection RD8000 Manuel utilisateur

SPX

SPX Radiodetection RD7000+ Manuel utilisateur

SPX

SPX C.A.T4 Manuel utilisateur

SPX

SPX Radiodetection RD7100 Manuel utilisateur

SPX

SPX Radiodetection Schonstedt u-LOCATE Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur