SPX RD1000 Manuel utilisateur
COMPANY CONFIDENTIAL
System Assembly
Open the main box; remove the Accessory Box, Cart Base and
Sensor Box. Open each box and lay out all the components.
RD1000 Training Course
Version 1 19
COMPANY CONFIDENTIAL
Using the Display Unit
The Display Unit has 8 buttons numbered 1 to 8, larger Pause and
Camera buttons as well as buttons to increase and decrease the
screen Contrast and Brightness.
Turn on the system by pressing any button on front of the Display Unit.
Both red lights will illuminate and after few seconds, the splash screen
and menu will appear.
The menu option on the screen above
the button indicates its function.
RD1000 Training Course
Version 1 20
COMPANY CONFIDENTIAL
Using the Display Unit
To operate the system:
a) The first screen displayed when the system is powered on is the Systems Settings
Screen. It has options to start scanning or change settings such as language,
measurement units, date and time.
b) To start scanning, press Scan to display the Scanning Screen. When the scale
appears on the right side of the screen, push the cart. The data image scrolls across
the screen from the right.
c) Stop and back up to see the Locating Screen to mark the exact position of a target on
the ground and to access the menu to estimate its depth.
d) When you push the cart forward again and reach the point where you originally stopped
and backed up, the system will automatically start scanning again. Or press Clear
Screen to start fresh.
e) At any time press the Pause button to change Depth, Color, Gain etc. using the Image
Settings Screen then press Scan (or Pause again) to continue.
If the Display Unit has Compact Flash disk, pressing the Camera button saves the current
screen image to the Compact Flash. Later, transfer images to a PC for re-plotting and
printing.
RD1000 Training Course
Version 1 21
COMPANY CONFIDENTIAL
System Settings Screen
Scan
Press the Scan button to start scanning.
Language
Select the language for the menus.
Current options are English or Icons.
Units
Units for the Position Axis, Depth Axis
and Depth Indicator can be either
Meters or Feet.
RD1000 Training Course
Version 1 22
COMPANY CONFIDENTIAL
System Settings Screen
RD1000 Training Course
Version 1 23
COMPANY CONFIDENTIAL
System Settings Screen
Scale
The Scale button toggles to four
different Scale options:
1) Lines means Depth Lines are
plotted on the data image to assist
with determining the depth of
targets.
RD1000 Training Course
Version 1 24
COMPANY CONFIDENTIAL
System Settings Screen
2) Text means Depth Values are
plotted in the center of the data
image every 8 metres or 26 feet.
RD1000 Training Course
Version 1 25
COMPANY CONFIDENTIAL
System Settings Screen
3) Both means both Depth Lines
and Values are plotted on the
data image.
4) Off means no Depth Lines and
Values are plotted on the data
image.
RD1000 Training Course
Version 1 26
COMPANY CONFIDENTIAL
System Settings Screen
Date
Opens the Date Screen to change the current date. Images are saved
with this date.
Time
Opens the Time Screen to change the current date. Images are saved
with this time.
Power Off
Opens a sub-menu to confirm powering off the system. There is also
an option to restore the system to factory default settings.
System Information
The top of the Systems Setting Screen displays the serial number of the
GPR sensor, the software version number, the GPR Sensor frequency
(in MHz) and the current battery voltage.
RD1000 Training Course
Version 1 27
COMPANY CONFIDENTIAL
Scanning Screen
After pressing the Scan button, wait a few
seconds for the vertical depth scale to
appear on the right side of the screen, and
then push the Cart forward.
A cross-sectional image of the ground scrolls
onto the screen from the right to left. The
position is displayed on the horizontal axis at
the top while the depth is displayed on the
vertical axis. The position and depth axes
units are meters or feet depending on the
units set in the Systems Setting Screen.
If the Scale or Both option is selected,
horizontal depth lines appear on the image to
assist with determining the depth of targets.
RD1000 Training Course
Version 1 28
Table des matières
Autres manuels SPX Équipement industriel
SPX
SPX APV Cavitator Manuel utilisateur
SPX
SPX Marley Geareducer 32.2 Series Manuel utilisateur
SPX
SPX Waukesha Cherry-Burrell Manuel utilisateur
SPX
SPX OTC PRO-CRUSH 1896 Manuel utilisateur
SPX
SPX Marley Geareducer 2800 Series Manuel utilisateur
SPX
SPX Waukesha Cherry-Burrell Votator II Manuel utilisateur
SPX
SPX CUES ACCUPOINT MS611 Manuel utilisateur
SPX
SPX Power Team HNS150A Manuel utilisateur
SPX
SPX MARLEY Geareducer 2700 Series Manuel utilisateur
SPX
SPX APV DELTA SDMU4 Manuel utilisateur
