SPRT SP-POS88VS Manuel utilisateur
SPRT®
SP-POS88ⅤThermal Receipt Printer
User’s Manual
（Ver 1.00）
Beijing Spirit Technology Development Co., Ltd
Address: No.26,Ave 4,Chuangye Middle Road, Shangdi Information
Industry Park , Beijing, China
Post Code:100085
Tel:+861051661178
Fax:+861051661178-190
E-mail: [email protected]
Content
Introduction ...................................................................................................................................... 3
Chapter 1 Feature and Performance ........................................................................................... 3
1.1 Print Performance ............................................................................................................... 3
1.2 Print Paper ........................................................................................................................... 4
1.3 Print Font ............................................................................................................................ 4
1.4 Interface .............................................................................................................................. 5
1.5 Print Control Commands..................................................................................................... 5
1.6 Power Supply ...................................................................................................................... 6
1.7 Operation Environment ....................................................................................................... 6
1.8 Outline Dimension .............................................................................................................. 6
1.9 Model classification ............................................................................................................ 6
Chapter 2 Operation Specification ............................................................................................... 7
2.1 Printer Appearance .............................................................................................................. 7
2.2 Paper Installation ................................................................................................................. 8
2.2.1 Paper Loading ....................................................................................................... 8
2.2.2 Solution to Paper Jam ......................................................................................... 8
2.3 Interface .............................................................................................................................. 9
2.3.1 Serial Interface ...................................................................................................... 9
2.3.2 Parallel Interface ................................................................................................. 11
2.3.3 BLUETOOH interface connection .................................................................... 14
2.3.4 BLUETOOH binding address ............................................................................ 15
2.3.5 Cash Drawer Interface ....................................................................................... 16
2.3.6 Power Connection .............................................................................................. 17
2.4 Buttons and Indicators ...................................................................................................... 18
2.5 Self-test ............................................................................................................................. 18
2.6 Hexadecimal Printing ........................................................................................................
19
Introduction
POS88Vprinter is a new type line thermal printer, it features in fast
speed print, low print noise, high reliability, perfect print quality and
ribbon needless, avoiding the vexation of regular maintenance.
POS88Vprinter: small in outline dimension, simple operation, and
extensive application, especially suitable for commercial cash
register, PC-POS, bank POS and all kinds of receipts print.
Chapter 1 Feature and Performance
1.1 Print Performance
● Print method: direct thermal
● Print paper width: 79.5±0.5mm
● Print density: 8 dots/mm, 576 dots/line
● Print speed: approx.250mm／sec.
● Reliability
(1)Print head life: 100km
Warning
This is a class A product. In a domestic environment this produ
ct may cause radio interference in which case the user may be
required to take adequate measures.
Using condition:
＊Print 12 × 24 ASCII characters, print 50 lines each time,
intermittent print repeatedly
＊Each dot-line printing at the same time should not exceed
25%, each character line and one dot vertical printing
repeatedly should not exceed 11 times
＊Use specified thermal paper
（2）Cutter life: 500,000 cuts
Using condition: less than 30 cuts/minute
● Valid print width: 72mm
1.2 Print Paper
● Thermal paper roll model: TF50KS－E（Japan paper co.ltd）
AF50KS-E (JUJO THERMAL)
● Thermal paper roll: Width－－－ 79.5±0.5mm
Outer Diameter －－－ 80mm（max.）
Inner Diameter－－－ 13mm（min.）
Thickness －－－ 0.06mm～0.08mm
1.3 Print Font
● ANK Character Set
12×24 dots，1.5（W）×3.00（H）mm
● GB GB2312-80(Chinese):
24×24 dots，3.00（W）×3.00（H）mm.
1.4 Interface
● RS－232C Serial Interface：
DB-25 socket (female), supports XON/XOFF and TR/DSR
protocols.
Baudrate: 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
adjustable.
Data structure: 1start bit + (7 or 8) data bits + 1 stop bit.
Parity checking: no parity or odd, even parity optional.
● Parallel Interface
36-pin，8-bit parallel interface，BUSY/ACK handshaking protocol,
TTL signal level.
● Ethernet Interface: Normal ethernet interface.
● USB Interface：USB interface
● Cash Drawer Control
DC24V，1A，6-pin RJ-11 socket.
1.5 Print Control Commands
● Character print commands: support double-width, double height
print of ANK characters, user-defined characters and Chinese
characters, the character line spacing is adjustable.
● Graphics print commands: support the print of bit-map graphics
and download bit-map graphics with different density
● GS bar code print commands: support UPC-A，UPC-E，EAN-13，
EAN-8, CODE39，ITF，CODEBAR，CODE93, CODE128, PDF417,
QR bar code printer.
1.6 Power Supply
● DC24V±10％，2A，A-1009-3P power socket.
1.7 Operation Environment
● Operation temperature: 5～50℃; Relative humidity: 10～80％
● Storage temperature: -40～55℃; Relative humidity: 10～90℃
1.8 Outline Dimension
●200（L）mm×150（W）mm×139（H）mm
1.9 Model classification
Model Interface
SP-POS88VS RS232C Serial Interface
SP-POS88VP Parallel Interface
SP-POS88VM RS232+USB+Ethernet Interface
SP-POS88VU USB Interface
SP-POS88VBT USB+Bluetooth interface
Chapter 2 Operation Specification
2.1 Printer Appearance
2.2 Paper Installation
2.2.1 Paper Loading
POS88V adopts 79.5mm width thermal paper roll.
Steps of Loading Thermal Paper Are as below:
Hold down the upper cover button on the left side, open the
movable upper cover, draw a certain length of the paper roll, put
the paper end on the print head, close the upper cover and press it
downwards lightly.
1. Pay attention to the direction of loading paper,
make the printing surface face to the print head.
2. Please don’t feed or draw the paper forwards or
backwards with hands.
3. Keep clean of the print head, avoid to influence
the printing quality.
2.2.2 Solution to Paper Jam
If cutter jam, turn off the power, and turn on again, the cutter will
be back to original position. If paper jam, open the paper strage
！Caution!
cover, and take out the paper. If the cutter can not be back to the
original position, open the cover of it, and turn the white plastic gear
by the direction suggestive on the cutter by hand to make the cutter
be back to the original position.
2.3 Interface
2.3.1 Serial Interface
The serial interface of SP-POS88Ⅴ printer is compatible with
RS-232C, supports DTR/DSR and XON/XOFF handshaking
protocols, uses DB25 socket (female). The pin order of the serial
port is as Fig.2-2 shows:
Fig.2-2 Pin Order of Serial Port
The pin assignment of serial interface is shown in Fig. 2-3:
Pin
No.
Signal
Name
Signal
Directio
n
Sourc
e
Description
1 FG —— —— Cover ground
2 TXD Output Printer Printer transmits control
code X-ON/X-OFF and data
to host
3 RXD Input Host Printer receives data from
host
4 RTS Output Printer The same with 20pins DTR
signal
6 DSR Input Host Signal “MARK” means the
host is busy and can not
receive data. Signal
“SPACE” means the host is
ready to receive data.
7 GND —— —— Signal Ground
20 DTR Output Printer Signal “MARK” means the
host is busy and can not
receive data. Signal
“SPACE” means the host is
ready to receive data.
Fig. 2-3 The pin assignment of serial interface
Note: (1)“Source” denotes the source that signal come from;
Ce manuel convient aux modèles suivants
4
Table des matières
