Sprout SPEAKI Manuel utilisateur

SPEAKI

BLUETOOTH

SPEAKER

PRODUCT MANUAL

01. What’s in the box? 2

02. Product overview 3

03. Quick star guide 4

04. Operating controls 7

05. Speciﬁcations 10

06. Imporant safety info 11

07. Consumer guarantee 12

CONTENTS

Scan the QR code

to access an online

version of this manual

WE PUT MORE INTO

OUR TECH, SO YOU CAN

GET MORE OUT OF LIFE.

At Sprout, our purpose is to help

you unlock the potential of your

technology. We’re an Australian

brand, and we design all of our

products locally to ensure they

are uniquely suited to your lifestyle.

01. What’s in the box? 2

02. Product overview 3

03. Quick star guide 4

04. Operating controls 7

05. Speciﬁcations 10

06. Imporant safety info 11

07. Consumer guarantee 12

CONTENTS

Scan the QR code

to access an online

version of this manual

WE PUT MORE INTO

OUR TECH, SO YOU CAN

GET MORE OUT OF LIFE.

At Sprout, our purpose is to help

you unlock the potential of your

technology. We’re an Australian

brand, and we design all of our

products locally to ensure they

are uniquely suited to your lifestyle.

1. WHAT’S IN THE BOX?

Thank you for choosing the Speaki Bluetooth

Speaker by Sprout.

For optimum perormance and safety, please

read instructions carefully before usage.

Please keep this manual for future reference.

1x Speaki speaker

1x USB-A to USB-C charging cable

1x Product manual

1. LED indicator

2. Power buton

3. Play buton

4. Volume up buton

5. Volume down buton

6. UNISYNCTM buton

7. LED batery indicator

8. USB-C input por

9. 3.5mm aux input por

2. PRODUCT OVERVIEW

8 9

1. WHAT’S IN THE BOX?

Thank you for choosing the Speaki Bluetooth

Speaker by Sprout.

For optimum perormance and safety, please

read instructions carefully before usage.

Please keep this manual for future reference.

1x Speaki speaker

1x USB-A to USB-C charging cable

1x Product manual

1. LED indicator

2. Power buton

3. Play buton

4. Volume up buton

5. Volume down buton

6. UNISYNCTM buton

7. LED batery indicator

8. USB-C input por

9. 3.5mm aux input por

2. PRODUCT OVERVIEW

8 9

TURNING SPEAKI ON/OFF

To power on, long press the power buton for 2

seconds. Speaki will announce “power on” whilst the

LED indicator light at the top will light up.

It will flash blue/red until a Bluetooth connection

has been established.

To power of, long press the power buton for 2

seconds. The speaker will announce “power of”

with the LED indicator also turning of.

To preserve batery, Speaki will automatically turn

of afer 5 minutes of no Bluetooth or 3.5mm aux

connection.

CONNECTING VIA 3.5MM AUX CABLE

To play audio using the aux cable, connect the cable

from the Speaki to your device. The LED indicator light

will change to a solid red. Speaki will play the audio

when you press ‘play’ on your device.

Please note: Using 3.5mm aux input will override a

Bluetooth source input.

CONNECTING VIA BLUETOOTH

1. Press the power buton for approximately two

seconds. The LED indicator light will flash blue and

red to indicate Speaki is ready for pairing.*

2. Turn on Bluetooth on your mobile phone/

music device.**

3. ’Speaki’ will appear on your mobile phone/music

device. Select ‘Speaki’ to pair.

4. Once your mobile phone/music device is

connected to the Speaki speaker, the LED

indicator light will change to a solid blue, and the

speaker will announce “Bluetooth connected”.***

5. Enjoy your music.

*Speaki will automatically enter Bluetooth pairing mode when

turned on for the ﬁrst time. To reset Bluetooth pairing, hold the

UNISYNC buton for 6 seconds to forget all devices and initiate

Bluetooth pairing mode again.

**If you are not familiar with Bluetooth pairing for your mobile

phone or music device, refer to the user guide for your mobile

phone/music device for instructions to pair a new device

using Bluetooth.

***Speaki will always store the last device paired

and if the device is within Bluetooth range, Speaki

will automatically connect to the device.

3. QUICK START GUIDE 3. QUICK START GUIDE

TURNING SPEAKI ON/OFF

To power on, long press the power buton for 2

seconds. Speaki will announce “power on” whilst the

LED indicator light at the top will light up.

It will flash blue/red until a Bluetooth connection

has been established.

To power of, long press the power buton for 2

seconds. The speaker will announce “power of”

with the LED indicator also turning of.

To preserve batery, Speaki will automatically turn

of afer 5 minutes of no Bluetooth or 3.5mm aux

connection.

CONNECTING VIA 3.5MM AUX CABLE

To play audio using the aux cable, connect the cable

from the Speaki to your device. The LED indicator light

will change to a solid red. Speaki will play the audio

when you press ‘play’ on your device.

Please note: Using 3.5mm aux input will override a

Bluetooth source input.

CONNECTING VIA BLUETOOTH

1. Press the power buton for approximately two

seconds. The LED indicator light will flash blue and

red to indicate Speaki is ready for pairing.*

2. Turn on Bluetooth on your mobile phone/

music device.**

3. ’Speaki’ will appear on your mobile phone/music

device. Select ‘Speaki’ to pair.

4. Once your mobile phone/music device is

connected to the Speaki speaker, the LED

indicator light will change to a solid blue, and the

speaker will announce “Bluetooth connected”.***

5. Enjoy your music.

*Speaki will automatically enter Bluetooth pairing mode when

turned on for the ﬁrst time. To reset Bluetooth pairing, hold the

UNISYNC buton for 6 seconds to forget all devices and initiate

Bluetooth pairing mode again.

**If you are not familiar with Bluetooth pairing for your mobile

phone or music device, refer to the user guide for your mobile

phone/music device for instructions to pair a new device

using Bluetooth.

***Speaki will always store the last device paired

and if the device is within Bluetooth range, Speaki

will automatically connect to the device.

3. QUICK START GUIDE 3. QUICK START GUIDE

LED INDICATOR

• Flashing blue/red - Bluetooth pairing mode

• Solid blue - Bluetooth connected

• Solid red - 3.5mm aux connected

POWER BUTTON

• 2 second long press - power on/power of

• 4 second long press - power on + Bluetooth pairing

PLAY BUTTON

• 1 press - play/pause/answer call/end call

• 2 second long press - reject call

• 2 presses - Siri/Google

VOLUME UP BUTTON

• 1 press - volume up

• 2 second long press - nex track

VOLUME DOWN BUTTON

• 1 press - volume down

• 2 second long press - restar track

• 2 second long press x2 - previous track

UNISYNCTM BUTTON

• 1 press - cycle through UNISYNC functions

(UNISYNC mode/UNISYNC audio/UNISYNC disabled)

• 2 second long press - disconnects Bluetooth

(device remains paired to Speaki)

• 6 second long press - resets UNISYNC and Bluetooth

connection (device will need to be re-paired)

3. QUICK START GUIDE 4. OPERATING CONTROLS

CHARGING YOUR SPEAKI

1. Remove the por cover on the back of the

speaker, and connect the speaker via the USB-C

por to the USB-A power source, using the

included charging cable.

2. The LED batery indicator will flash from one to

four LEDs to indicate Speaki is charging. The lights

will stop flashing once Speaki is fully charged.

A full charge will take approximately 2-3 hours,

depending on the speed of the charger. Once

charged, remove the charge cable and replace the

por cover.

Please note: Speaki will announce “low batery”

when the batery level reaches approximately 10%.

LED BATTERY INDICATOR

4 white lights on: Batery 76-100%

3 white lights on: Batery 51-75%

2 white lights on: Batery 26-50%

1 white light on: Batery 0-25%

LED INDICATOR

• Flashing blue/red - Bluetooth pairing mode

• Solid blue - Bluetooth connected

• Solid red - 3.5mm aux connected

POWER BUTTON

• 2 second long press - power on/power of

• 4 second long press - power on + Bluetooth pairing

PLAY BUTTON

• 1 press - play/pause/answer call/end call

• 2 second long press - reject call

• 2 presses - Siri/Google

VOLUME UP BUTTON

• 1 press - volume up

• 2 second long press - nex track

VOLUME DOWN BUTTON

• 1 press - volume down

• 2 second long press - restar track

• 2 second long press x2 - previous track

UNISYNCTM BUTTON

• 1 press - cycle through UNISYNC functions

(UNISYNC mode/UNISYNC audio/UNISYNC disabled)

• 2 second long press - disconnects Bluetooth

(device remains paired to Speaki)

• 6 second long press - resets UNISYNC and Bluetooth

connection (device will need to be re-paired)

3. QUICK START GUIDE 4. OPERATING CONTROLS

CHARGING YOUR SPEAKI

1. Remove the por cover on the back of the

speaker, and connect the speaker via the USB-C

por to the USB-A power source, using the

included charging cable.

2. The LED batery indicator will flash from one to

four LEDs to indicate Speaki is charging. The lights

will stop flashing once Speaki is fully charged.

A full charge will take approximately 2-3 hours,

depending on the speed of the charger. Once

charged, remove the charge cable and replace the

por cover.

Please note: Speaki will announce “low batery”

when the batery level reaches approximately 10%.

LED BATTERY INDICATOR

4 white lights on: Batery 76-100%

3 white lights on: Batery 51-75%

2 white lights on: Batery 26-50%

1 white light on: Batery 0-25%

CONNECTING MULTIPLE SPEAKERS VIA UNISYNCTM

Using the UNISYNC feature you can connect up to

50 UNISYNC compatible speakers. In this example,

your Speaki is your primary device.

To connect a replica, shor press the UNISYNC

buton on your primary speaker once to enter

UNISYNC mode. Once the primary announces it is

in UNISYNC mode, repeat on the replica. Afer the

replica announces it is in UNISYNC mode, press the

UNISYNC buton on the replica device once more –

the replica will announce it is using UNISYNC audio.

The primary speaker will show a solid blue light while

replicas will show a flashing red and blue light.

To exit UNISYNC mode, press the UNISYNC buton

until you hear UNISYNC disabled.*

Press and hold the UNISYNC buton for 6 seconds

to reset the UNISYNC function.**

*If UNISYNC is disabled, Speaki will disconnect from but

remember the replicas connected to it.

**Reseting UNISYNC will enable Speaki to ‘forget’ all replica

devices and Bluetooth connections.

MULTIPOINT CONNECTION

Mulipoint is a feature that allows Speaki to connect

to two Bluetooth devices at once. This means that

you can listen to music from one device, whilst still

hearing notiﬁcations and receiving calls from another

device.

To set up Mulipoint:

1. Connect your ﬁrst Bluetooth device.

2. Hold down the UNISYNC buton for 2 seconds

to disconnect Bluetooth.

3. Connect your second Bluetooth device.

4. Hold down the power buton for 2 seconds

and turn of Speaki.

5. Hold down the power buton for 2 seconds

and turn on Speaki.

Speaki will announce “Bluetooth connected” twice.

Speaki will play audio from the last device it receives

a command from, but it will treat the device with calls

and notiﬁcations as priority.

4. OPERATING CONTROLS 4. OPERATING CONTROLS

Autres manuels pour SPEAKI

Table des matières

Autres manuels Sprout Intervenants

Sprout

Sprout Nomad Alpha Manuel utilisateur

Sprout

Sprout Nomad Tempo Manuel utilisateur

Sprout

Sprout Immerse Manuel utilisateur

Sprout

Sprout Nomad 3 Mi+ Manuel utilisateur

Sprout

Sprout SOUNDWAVE Manuel utilisateur

Sprout

Sprout Nomad Trek+ Manuel utilisateur

Sprout

Sprout SOUNDWAVE PRO Manuel utilisateur

Sprout

Sprout Nomad 3+ Manuel utilisateur

Sprout

Sprout SOUNDWAVE LITE Manuel utilisateur

Sprout

Sprout Nomad Alpha Manuel utilisateur

Sprout

Sprout Nomad 3+ Manuel utilisateur

Sprout

Sprout Immerse Manuel utilisateur

Sprout

Sprout Maverick Hybrid Manuel utilisateur

Sprout

Sprout SOUNDWAVE LITE Manuel utilisateur

Sprout

Sprout Nomad Trek+ Manuel utilisateur

Sprout

Sprout cortex Manuel utilisateur

Sprout

Sprout Nomad Mi+ Manuel utilisateur

Sprout

Sprout SOUNDWAVE Manuel utilisateur

Sprout

Sprout Maverick Hybrid Manuel utilisateur

Sprout

Sprout Immerse Manuel utilisateur

Sprout

Sprout MAVERICK HYBRID 3-IN-1 SPEAKER Manuel utilisateur

Sprout

Sprout Nomad Tempo Manuel utilisateur

Sprout

Sprout SPEAKI Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur