Sprint Sp9127 Manuel utilisateur

Table of Contents

Important Safety Instructions...........................................................................................2

Parts Check List...................................................................................................................3

Handset Layout....................................................................................................................4

Base Unit................................................................................................................................5

GETTING STARTED.....................................................................................................................6

Installation of Battery Pack in Handset...............................................................................6

Setup.................................................................................................................................7

Ringer Selection..........................................................................................................8

Tone/PulseSelection....................................................................................................8

The Handset Display.........................................................................................................9

BASIC OPERATION................................................................................................................10

Making Calls.....................................................................................................................10

Volume Control................................................................................................................10

ChannelChanging..............................................................................................................10

UsingRedial........................................................................................................................11

Answering Calls................................................................................................................11

Flash.................................................................................................................................11

Hold......................................................................................................................................12

Page...................................................................................................................................12

ADVANCED OPERATION......................................................................................................13

Caller ID/Call Waiting ID...............................................................................................13

Receiving and Storing Calls.......................................................................................13

About Caller ID ....................................................................................................... 13

Review Caller ID .......................................................................................................13

Deleting Records From Call History.........................................................................14

Delete A Specific Call............................................................................................14

Delete All Calls........................................................................................................14

DialADisplayedNumber................................................................................................14

Store A Caller ID Record In Phone Book Memory.....................................................14

Display Screen Messages........................................................................................15

Phone Book..................................................................................................................16

Store Memory Numbers............................................................................................16

EditNumbersStoredInMemory..................................................................................17

Delete Numbers Stored in Memory...........................................................................17

Dial Memory Numbers..............................................................................................17

Message Waiting.......................................................................................................18

Headset Operation ....................................................................................................19

ADDITIONAL INFORMATION...............................................................................................20

Maintenance....................................................................................................................20

In Case of Difficulty..........................................................................................................21

WarrantyStatement.............................................................................................................23

FCC, ACTA and IC Regulations.....................................................................................25

RBRCTM Seal..................................................................................................................28

Technical Specifications..................................................................................................29

When using your telephone equipment, basic safety precautions should always be followed

to reduce the risk of fire, electric shock and injury, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, kitchen sink or

swimming pool).

5. Do not place this product on an unstable surface, such as a table, shelf, or stand. The

product may fall, causing serious damage.

6. Slots and openings in the back or bottom of the Base Unit and Handset are provided

for ventilation. To protect them from overheating, these openings must not be blocked

by placing the product on a soft surface such as a bed, sofa or rug. This product should

never be placed near or over a radiator or heat register. This product should not be

placed in any area where proper ventilation is not provided.

7. This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply in your home, consult

your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not install this product where the

cord may have anyone walking on it.

9. Never push objects of any kind into this product through slots in the Base or Handset

as they may touch dangerous voltage points or short out parts that could result in a risk

of fire or electric shock. Never spill liquid of any kind on the product.

10. To reduce the risk of electric shock, do not disassemble this product, but take it to an

authorized service facility. Opening or removing parts of the Base or Handset other

than specified access doors may expose you to dangerous voltages or other risks.

Incorrect reassembling can cause electric shock when the product is subsequently

used.

11. Do not overload wall outlets and extension cords as this can result in the risk of fire

or electric shock.

12. Unplug this product from the wall outlet and refer servicing to an authorized service

facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled onto the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions, as

improper adjustment of other controls may result in damage and often requires

extensive work by an authorized technician to restore the product to normal

operation.

E. If the product has been dropped and the Base and/or Handset has been damaged.

F. If the product exhibits a distinct change in performance.

13. Avoid using a telephone (other than cordless) during an electrical storm. There is a

remote risk of electric shock from lighting.

14. Do not use the telephone to report a gas leak in the vicinity of the leak.

15. Only put the Handset of your telephone next to your ear when it is in normal talk mode.

Important Safety Instructions

Parts Check List

1. Base Unit

2. Handset

3. User’s Manual

4. Power Adaptor

5. Telephone Line Cord

6. Battery Pack

7. Belt Clip

Handset Layout

1. LCD Display

2. SELECT

3. Navigation/Volume Keys

4. ON

5. FLASH

6. HOLD

7. Antenna

8. Headset Jack

9. OFF

10. Dialing Keys

11. REDIAL/PAUSE

12. PROGRAM/CHANNEL

Base Unit

1. Power Jack

2. Telephone Line Jack

3. IN USE/CHARGING LED

4. MESSAGE Indicator

5. PAGE

TEL. LINE

9V AC

The Handset of your 9127 is powered by a rechargeable battery pack. It charges

automatically whenever the Handset is in the Base Unit. The battery pack needs charging

when:

• The low battery icon and message are displayed:

• A double beep sounds.

To charge the battery pack, place the Handset in the Base Unit. The IN USE/CHARGING

indicator will light to show the Handset is seated properly and the battery pack is charging. It

is recommended that the battery pack should be charged for at least 16 hours initially.

Afterwards, 8 hours of maintenance charging should be sufficient.

To install (or replace) the battery pack:

1. Remove the battery case cover by pressing on the ridged lines and sliding downward.

2. Discard the old battery pack by pulling firmly on the battery cords. Don’t put the old

battery pack in the trash or a fire - it could explode. Please recycle.

3. Snap in the new battery pack, with the wires in one of the lower corners. Insert the

battery plug into the socket, aligning the two holes in the plug with the socket pins.

4. Replace the battery case cover by sliding the cover

upwards.

5. Place the Handset in the cradle of the Base Unit to allow

it to charge for 16 hours.

CAUTION: To Reduce the Risk of Fire or Injury, Read and

Follow these Instructions:

IMPORTANT:

Do not dispose of this battery pack into household garbage. For

information on recycling or proper disposal, consult your local

solid waste collection or disposal organization.

1. Use only VTech rechargeable battery pack, or equivalent.

2. Do not dispose of the battery pack in a fire. The cell may

explode.

3. Do not open or mutilate the battery pack. Released electrolyte

is corrosive and may cause damage to the eyes or skin.

It may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the

battery with conducting materials such as rings, bracelets,

and keys. The battery pack or conductor may overheat and

cause burns.

To purchase replacement battery packs, call the Supplier at (800) 949-4357

Installation of Battery Pack in Handset

GETTING STARTED

Setup

1. Plug the AC adaptor into an electrical outlet, and the AC connector to the bottom of the

Base Unit. If the Handset battery pack has not been charged previously, place the Handset

in the Base Unit cradle, and allow it to charge for 16 hours.

2. Connect the telephone line cord to the jack on the bottom of the Base Unit, and the other

end to the wall jack.

TEL. LINE

A fully charged battery pack will provide a maximum talk time

of 3.75 hours, with a maximum standby time of 3.75 days.

GETTING STARTED

Setup

Ringer Selection

1. Press PROG/CHAN.

2. Press or until the screen displays RINGER:

and the current setting.

3. Press SELECT. The current selection will flash,

and you will hear a sample of the selected ring.

4. Press or to select a different ring style (there

are 4), or turn the ringer OFF.

5. Press SELECT to confirm your choice.

NOTE: If the ringer is set to OFF, the display will

showRINGER OFF in idle mode.

Tone/Pulse Selection

NOTE: Your 9127 is factory-preset for TONE

dialing.

1. To change dialing mode, press PROG/CHAN.

2. Press or until the screen displays DIAL

MODE: and the current setting.

3. Press SELECT. The current setting is flashing.

4. Press or to change the setting.

5. Press SELECT to confirm your choice.

If the Display says: It Means:

The Handset is in idle mode.

Indicates incoming call.

Waiting for dial tone.

Handset is in use.

New messages have been received in

your Voicemail service.

The Handset Display

GETTING STARTED

Making Calls

Press ON. Dial the phone number.

Press OFF to end your call.

-OR-

Dial the phone number. Use the key to backspace

if you make a dialing mistake. Then press ON.

Press OFF to end your call.

When the Handset is in use, the IN USE/CHARGING

light on the Base Unit will flash. When the Handset is in

theBaseUnitcradle,theIN USE/CHARGING lightglows

steadily.

Volume Control

While you are on a call, press to raise the inbound volume and to lower it. The Handset

will display the relative volume setting as you adjust it. When you reach the maximum or

minimum volume setting, you will hear a double beep.

Channel Changing

If you experience noise or interference while on a call, you may be too

far from the Base Unit, or in an obstructed area. Try moving to a different

location. If this does not improve the transmission, press PROG/CHAN.

You can press this key more than once, if necessary.

NOTE: This feature only operates while you are on an active call.

BASIC OPERATION

Basic Operation

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sprint Téléphone sans fil

Sprint

Sprint SP1733 Manuel utilisateur

Sprint

Sprint 1733 Manuel utilisateur

Sprint

Sprint 1930c Manuel utilisateur

Sprint

Sprint 2422 Manuel utilisateur

Sprint

Sprint Spread Spectrum Cordless Telephone Manuel utilisateur

Sprint

Sprint 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call... Manuel utilisateur

Sprint

Sprint sp2621 Manuel utilisateur

Sprint

Sprint 900MHz Digital Cordless Phone with Call... Manuel utilisateur

Sprint

Sprint vt1923 Manuel utilisateur

Sprint

Sprint sp2603 Manuel utilisateur

Sprint

Sprint Handset Fiche technique

Manuels Téléphone sans fil populaires d'autres marques

3Com

3Com NBX Manuel utilisateur

Panasonic

Panasonic KX-TGK210HK Manuel utilisateur

Panasonic

Panasonic KX-TCA181EX Manuel utilisateur

BT FREESTYLE 3200 Manuel utilisateur

AT&T

AT&T CL84102 Manuel utilisateur

BREZZICNI

BREZZICNI CL-3622 Manuel utilisateur

Panasonic

Panasonic KX-TG1831NZ Manuel utilisateur

Panasonic

Panasonic KX-TG7301E Manuel utilisateur

Furuno

Furuno FM-4721 Manuel utilisateur

Sanyo

Sanyo CLT-J70 Manuel utilisateur

Amplicomms

Amplicomms BigTel 201 Manuel utilisateur

GE 26992 Manuel utilisateur

AT&T

AT&T E1812B Manuel utilisateur

Sanyo

Sanyo CLT-670 Manuel utilisateur

GE 15432970 Manuel utilisateur

Curtis

Curtis TC595 Manuel utilisateur

Gigaset

Gigaset Gigaset 3000 Micro Manuel utilisateur

Poly

Poly VVX D230 Guide de configuration

Sprint sp9127 Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques