Sportop FS3400 Manuel d'utilisation
R
Owner’s Operating Manual ENGLISH
MODEL:FS3400
MINI STEPPER
１
SCAN CALORIE
TIMESTRIDES/MIN
COUNTMODE
RESET
MODE
Step.1 To pull open the meter(A28) from the housing(A26).
How to replace the battery:
Step.2 Take out the battery from the meter and put the new one into the
meter (A28).
Step.3 pay attention to positive/negative pole of the battery while
assembling the new battery.
Step.4 Epuip the meter onto the housing (A26) as per the instruction inside
the housing (A26).
EXERCISE COMPUTER
FUNTION BUTTONS
MODE/RESET: PRESS TO SELECT EACH FUNCTION
AND HOLD ON THE BUTTON FOR 3
SECONDS, ALL VALUE WILL BE RESET
TO ZERO.
FUNCTIONS:
SCAN: AUTOMATICALLY SCANS EACH FUNCTION IN SEQUENCE.
TIME: COUNTS FROM ZERO UP TO 99:59 IN ONE SECOND INCREMENT.
CALOREIES: ACCUMLATES THE CALORIE CONSUMPTION DURING EXERCISE.
THIS IS A ROUGH GUIDE ONLY AND SHOULD BE USED AS A
COMPARISON OVER SEVERAL EXERCISE SESSIONS.
COUNT: ACCUMLATES THE NUMBERS OF STRIDE DURING WORKOUT SESSION.
STRIDES/MIN: DISPLAYS STRIDES IN EVERY MINUTE.
NOTE:
1.TO TURN ON THE POWER,JUST PRESS ANY BUTTON OR START EXERCISE.
2.WITH NO SIGNAL TRANSMITTED TO THE COMPUTER FOR 4 MINUTES, THE
COMPUTER WILL SHUT OFF THE LCD DISPLAY AUTOMATICALLY.
3.BATTERY SPEC:1.5V UM-4 OR AAA(1 PCE).
Table des matières
Autres manuels Sportop Machine à pas
