SPINNAKER BRANDER Series Manuel utilisateur
BRADNER COLLECTION SP-5057
MINUTE
HAND
DATE
HOUR
HAND
SECOND HAND
1 2 3
AUTOMATIC 3 HANDS WITH DATE
CROWN
HOW TO SET THE TIME
1. Pull the crown out to position [3].
2. Turn the crown anti-clockwise to set the correct time.
3. Set to the correct time.
4. Push the crown back into position [1].
HOW TO SET THE DATE
1. Pull the crown out to position [2].
2. Turn the crown anti-clockwise to set the date.
3. Set the correct time.
4. Push the crown back into position [1].
* Do not set the date between 9:00 P.M. and 1:00 A.M.
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is
fully wound. An automatic watch will only wind when the watch is on your wrist
and your arm moves. Winding the watch by the crown will put power on the
spring but not enough to allow the watch to function fully. If your watch stops
overnight or loses time it means it is not being fully wound.
[3]
[1]
[2]
[1]
HOW TO SET INNER BEZEL
1. Turn the upper crown anti-clockwise.
2. The inner bezel turns clockwise.
3. Set the elaspsed time on the bezel.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels SPINNAKER Montre
SPINNAKER
SPINNAKER TESEI BRONZE Series Manuel utilisateur
SPINNAKER
SPINNAKER TRANSAT SP-5036 Manuel utilisateur
SPINNAKER
SPINNAKER LIMITED EDITION HASS Manuel utilisateur
SPINNAKER
SPINNAKER CROFT Manuel utilisateur
SPINNAKER
SPINNAKER HUll Series Manuel utilisateur
SPINNAKER
SPINNAKER TRANSAT SP-5036 Manuel utilisateur
SPINNAKER
SPINNAKER TESEI Manuel utilisateur
