SPIDER SAC8 Manuel utilisateur

SAC8 User’s Guide

8Ch Car Driving Recorder

Contents

Preface ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 2

Safety Advice ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3

Contents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5

1. Introduction

1-1. SAC8 Overview ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6

1-2. Rear ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7

1-3. Remote controller ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8

A/V output pin

2. Live Monitoring

2-1. Live Display ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9

2-2. Menu ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10

3. System Setup

3-1. Virtual Keyboard ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11

3-2. Input the password ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12

3-3. Device

3-3-1. Camera Setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13

3-3-2. Sensor input ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14

3-3-3. Video image setup ∙∙∙∙∙∙∙∙∙∙∙∙∙ 15

3-4. Recording

3-4-1. Recording Setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 16

3-4-2. Recording mode ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 17

3-5. Event

3-5-1. Motion detection setup ∙∙∙∙∙∙∙∙ 18

3-5-2. Event setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 19

3-6. Additional feature

3-6-1. G sensor setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 20

3-6-2. Setup for rear guide ∙∙∙∙∙∙∙∙∙∙∙∙ 20

3-7. System Setup

3-7-1. Language ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21

3-7-2. Time setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21

3-7-3. Password setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22

3-7-4. Parking mode setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 23

3-7-5. Signal type ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 24

3-7-6. Audio recording setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 24

3-7-7. Disk management ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 25

3-7-8. Set up for vehicle information ∙∙∙∙∙∙∙∙∙∙ 25

4. Playback

4-1. Playback ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 26

4-2. Set the year, month, date to playback ∙∙ 27

4-3. Time scroll bar ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 27

4-4. Playback Control ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 28

4-5. Split mode setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 29

5. Backup

5-1. Backup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 30

6. Viewer

6-1. Installation for viewer

/Playback the image ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 31

6-2. Configuration of the viewer (1) ∙∙∙∙∙∙∙∙∙∙∙ 35

6-3. Normal recording playback

6-3-1. Select the playback date and time ∙∙ 38

6-3-2. Time scroll bar ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 38

6-3-3. Time scroll bar usage ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 39

6-4. Event search ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 40

6-5. Capture ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 41

6-6. Print the image ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 41

6-7. Backup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 42

6-8. Viewer setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 43

6-9. DVR setup ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 44

7. Appendix

7-1. Specifications∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 45

7-2. Dimensions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 46

Preface

Notice

Any unauthorized use of this guide or its contents is prohibited.

The contents may be changed without notice.

The contents of this user guide are comprehensively designed to provide adequate information to

set up and operate the purchased device. Please contact DIS if you have any questions or find any

omissions.

If you find any missing pages in this users guide, please contact your dealer or DIS for a

replacement.

The images and display captures are examples to help you understand this device and may differ

from what you may observe.

Limitation of use

This device is designed and manufactured for commercial use only and is not intended for use

where the failure of the device could lead to death, personal injury, or severe environmental

damage. Please use discretion when using in situations that require high precision or that may

endanger life or damage valuable assets. DIS does not take any responsibility for accidents in such

cases.

Software License Agreement

D-TEG and its suppliers grant to the customer a nonexclusive and nontransferable license to use

the PC Viewer software in object code form solely on a single central processing unit owned or

leased by Customer or otherwise embedded in equipment provided by DIS.

Customer may make one archival copy of the Software provided Customer affixes to such copy all

Except as expressly authorized above, the customer shall not: copy, in whole or in part, software or

documentation; modify the software; reverse compile or reverse assemble all of any portion of the

software; or rent, lease, distribute, sell, or create derivative works of the software.

Export Restrictions

D-TEG products are controlled under the Korean Export Regulations, please check all relevant laws

and codes and make sure all compliances are met before exporting.

The use of recorded data without the expressed authorization of the owner is prohibited.

Trademark

• Microsoft, Windows Vista, Windows7 are trademarks of Microsoft Corporation, registered in the

US and other countries.

• Pentium is a trademark of Intel Corporation, registered in the US and other countries.

• Other company and product names mentioned herein may be trademarks of their respective

companies.

Safety Advice

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Please make sure you follow the safety advice/instructions given in the user guide.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Battery for RTC (Real Time Clock) inside.

CAUTION

Connect your vehicle’s power cable to the product after starting the vehicle.

The instant over voltage generated when starting up the vehicle may damage

the product if it is already connected.

CAUTION

Damages due to production malfunction, loss of data, or other damages occurring while using

this product shall not be the responsibility of the manufacturer. Although the product is a

device used for recording videos, the product may not save all videos in the case of a

malfunction. In the case of an accident, the sensor may not recognize the shock when the

impact is light and as a result, it may not begin recording automatically.

CAUTION

Install the product where it does not block driver’s visibility and where there is

no airbag installed. This could cause an accident or might injure the passengers in

case of accident.

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Safety Advice

GPS Reception

It may take between five and thirty minutes to get GPS reception.

1. Activate the product in an area without large buildings to improve

GPS reception.

The commercial purpose GPS has the average range error of more than 15

meters and the range error could be more than 100 meters due to

environmental conditions like buildings, roadside trees etc.

2. The temperature range for optimum operation of the GPS receiver in

your car is -10 ~ 50°C.

3. When using the product for the first time or after a long period (more

than three days), it may take a little longer to recognize your current

location.

It may take between five and thirty minutes to get GPS reception.

1. If there is an object at the end of the GPS antenna

2. If your vehicle has metallic elements on the windshields

3. If equipment generating electromagnetic waves that interfere with the GPS

signal is installed in the vehicle, e.g. other GPS devices such as certain types of

wireless activated alarms, MP3, CD players, etc. using GPS.

4. If you are using a receiver connected by cable, electric interference can be

avoided by simply changing the location of the GPS receiver (antenna).

5. On heavily overcast or cloudy days, if the vehicle is in a covered location

such as under a bridge or raised roadway, in a tunnel, an underground

roadway or parking area, inside a building or surrounded by high-rise

buildings.

6. If GPS signal reception is poor, it may take longer to locate your current

position when the vehicle is moving than when it is stationary.

Situations where reception may be obstructed.

Make sure that the power is turned OFF when attaching or removing HDD,SSD or CF

memory. When a power failure occurs during recording, the recording data may be

earased.

Contents

The Components may be changed without notice.

※The pictures in this manual may differ from the actual product.

※The user manual in order to improve product performance, and are subject

to change without notice to users

Blackbox Remote control

A/V out

Cameras

Power cable

GPS Antenna

Remote control Receiver

Digital IO Cable

HDD Knob

Normal Components

Options Components

2 3 4 5 7

1. Introduction

※The images and display captures are examples to help you understand this

device and may differ from what you may observe.

※The contents may be changed without notice.

1 Power Switch Power On/Off

2 Reset Button Reset as factory default

3 USB 2.0 Upgrade or backup for USB memory

4 Audio Output port Playback audio

5 LED indicators Indicate the device ‘s status with LED

6 SSD/HDD slot Removable 2.5” SSD/HDD slot

7 CF memory card slot Removable CF memory card slot

8 Cover Lock Cover key Lock

9 LED window Monitor LED status

1-1. SAC8 Overview

Door Open

Inside of door

Front view

1. Introduction

GND

VCC

GND

VCC

GND

VCC

ACC

GPS

VI (Video)

Power

GPS

CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

IrDa

(RS232)Rx Gnd CC Gnd S5 S3 S1

S6 S4 S2

Tx Gnd C2

S1~S6 : ARM In

C1(12V): ARM Out

C2(Relay): ARM Out

Mic A/V Out Power

Video Input : Use the car signal cable bundle for this connection. Connect the

appropriate car signals to the labeled cables.

Remote contoller receiver : Receive the signal to execute the external remote

controller.

GPS Port : Connect external GPS.

Ethernet connector: Supports network connection.

Sensor in/output & Serial port: Support 6ea of sensor input(S1~S6), 2ea of sensor

output(C1~C2) and RS232(Rx,Tx).

MIC : Connect the external microphone to record audio.

A/V out : Connect the monitor to monitor video or playback.

Power Connector : Use the included power cable bundle for this connection.

Micro USB : Connect the external usb device.

1 2

3 4 5 76

Rear Diagram

Rear

1-2. Rear

•▲▼◀▶ (arrows) : Used when the focus is moved.

•OK : When you choose to enter into a sub-menu or control.

•MENU :Menu screen will pop-up.

It is also used to move to the upper menu.

•VIEW : Change the split image screen.

•Number : Video channels can be selected.

Channel selection in the search screen.

•PWR : Output to an external monitor On / Off

•EMER(Emergency recording) : start recording in situations that

require urgent recording

※To use the remote control, the remote control receiver is required.

A/V output cable

Remote controller

VIDEO: RCA (Yellow)

AUDIO: RCA (White)

GND

VIDEO

AUDIO

1. Introduction

1-3. Remote controller, A/V output pin

From the live display, user can monitor as various division and full screen display.

Enter the search & setup menu.

Orange

Continuous Rec

Blue

Motion Rec

Dark Green

Sensor Rec

Yellow

Previous Rec

Purple

Impact Rec

Green

Instant Rec

Gray

Video Loss

5 63 4 7 8

3. Live Monitoring

3-1. Live Display

Audio Record : Indicate the audio recording status.

Backup : Indicate the backup status.

GPS : Indicate the GPS reception status.

USB : Indicate the status of USB memory.

Speed signal : Indicate the vehicle’s speed.

Camera Name : Indicate the camera’s name.

Date & Time : Indicate the date and time.

Recording Icon : Indicate the recording status as icon

Table des matières

Manuels Automobile électronique populaires d'autres marques

GoldCruise

GoldCruise GC90Ci Manuel utilisateur

DRG

DRG LC 120 Manuel utilisateur

Blue Ox

Blue Ox BX8848 Manuel utilisateur

Dometic

Dometic MAGICWATCH MWE890K Manuel utilisateur

Perfect Power

Perfect Power SMT8-T5 Manuel utilisateur

Honeywell

Honeywell Thor VM3A Manuel utilisateur

Waeco

Waeco MagicWatch MWE250 Manuel utilisateur

Rydeen

Rydeen BKM091 Manuel utilisateur

Skoda

Skoda 5E0 054 630 Manuel utilisateur

VDO

VDO SENDER UNIT 2159-0 Manuel utilisateur

iDataLink

iDataLink maestro Rr Manuel utilisateur

Audiovox

Audiovox PRO-PDA15 Manuel utilisateur

Movon

Movon MDAS-3LFFHD Manuel utilisateur

Pioneer

Pioneer Comfort adapter CA-D-PI.150 Manuel utilisateur

Dietz

Dietz 1110 Manuel utilisateur

Crux

Crux RVCFD-79 Manuel utilisateur

Nonda

Nonda ZUS Manuel utilisateur

iDataLink

iDataLink Maestro Manuel utilisateur