SPI SP41 Manuel du propriétaire

PUMPS
SP41/SP51/SP61/SP81
INSTALLATION
OPERATION
MAINTENANCE

Introduction ...........................................................................3
Safety ................................................................................4
Materials of Construction................................................................5
Seal Types.............................................................................5
Surface Finish..........................................................................5
Approvals .............................................................................5
Spare Parts..........................................................................6-9
Seal Kits........................................................................... 10 -11
Part Number Configurator ..............................................................12
Assembly Instructions - SP41 ......................................................... 13-18
Exploded Diagram - SP41 ..............................................................19
Assembly Instructions SP51/SP61/SP81 ................................................20-27
Exploded Diagram SP51/SP61/SP81 ..................................................28-30
Dimensions ...........................................................................31
Pump Curves ......................................................................32-36
Friction Loss Chart .....................................................................37
Warranty ..........................................................................38-39
\\TABLE OF CONTENTS

3
\\INTRODUCTION
ABOUT
Thank you for purchasing a pump from Stainless Products, LLC (SPI).
This manual contains installation, operation, and maintenance instructions for the SP41, SP51, SP61,
and SP81 pumps.
SPI pumps are designed for minimal routine maintenance, but care and attention should be given
to the instructions provided in this manual.
Do not remove any labeling on any SPI product. Immediately replace any label that is missing.
If, at any point, you have questions or concerns regarding your SPI pumps, please call 1-800-558-
9446 or 262-859-2826.

4
\\S A F E T Y
IMPORTANT SAFETY INFORMATION
Read this manual before installing, operating, and maintaining this equipment. Failure to read the
manual can result in personal injury and/or equipment damage.
Do not attempt to remove and/or modify any SPI product. Doing so can create unsafe conditions
for the operator(s) and/or surrounding persons . Any change to SPI products will void any and all
warranties.
Do not place any SPI product in an application where general product service ratings are ex-
ceeded. Doing so puts the operator(s) and/or surrounding persons at risk of personal injury and/or
result in equipment damage.
Do not remove any labeling on any SPI product. Immediately replace any label that is missing.
DISCLAIMER OF LIABILITY
SPI does not assume responsibility and expressly disclaims liability for loss, damage, or expenses
that arise in any way from the installation, operation, use, or maintenance performed in accor-
dance with this manual. SPI assumes no responsibility for any infringement of patents or other
rights of third parties that may result from use of the module . No license is granted by implication
or otherwise under any patent or patent rights.
SPI reserves the right to make changes to the product, specifications, or this manual without prior
notice.

5
\\TECHNICAL DATA
MATERIALS OF CONSTRUCTION
• Pump Head: 316L stainless steel
• Impeller: 316L stainless steel or CF8M (316) stainless steel
• Backplate: 316L stainless steel
• Impeller shaft: 316L stainless steel
• Adapter: 304 stainless steel
• Optional leg kit: 304 stainless steel
SEAL TYPES
• Single mechanical with:
• Resin impregnated carbon rotary seal
• PTFE rotary seal (optional)
• Ceramic stationary seal
SURFACE FINISH
• 32Ra or less on product contact surfaces
APPROVALS
• 3-A per 02-11
• Materials FDA approved

6
\\SPARE PARTS SP
SP41 Spare Parts
Item # Part Number Description Qty Kit
1 SP41-19-56 Pump Adapter 1
2 10B-1.5-HSP-NP Set Screw 2
3 SP6-41-SSFDP Set Screw 1
4 SP6-41-56 Impeller Shaft 1
5 SP51-80C Ceramic Stationary Seal 1 ▲
6SP51-80T
SP51-80TC
Rotary Seal PTFE
Rotary Seal Carbon 1▲
7 SP51-80N Seal O-Ring 1 ▲
8 SP41-80S Spring 1 ▲
9 SP41-40 Impeller O-Ring 1 ▲
10 SP41-2-Size Impeller 1
11 SP40-4 Backplate Gasket 1
12 SP41-1 Pump Head 1
13 SP13HC-4 Pump Head Clamp 1
▲Included in SP41-SK Seal Kit
2” Inlet x 2” Outlet available upon request

7
\\SPARE PARTS SP
SP51 Spare Parts
Item # Part Number Description Qty Kit
1 SP51-19-56 Pump Adapter 1
2 SP26-51 Retaining Pin 1
3SP6-51-56
SP6-51-145 Impeller Shaft 1
4 SP6-41-SSFDP Set Screw (for -56 Shaft only) 2
5 10B-1.5-HSP-NP Set Screw (for -56 Shaft) 1
Set Screw (for -145 Shaft) 2
6 SP51-11 Backplate 1
7 SP51-80C Ceramic Stationary Seal 1▲
8SP51-80T
SP51-80TC
Rotary Seal PTFE
Rotary Seal Carbon 1▲
9 SP51-80N Seal O-Ring 1 ▲
10 SP51-80S Spring 1 ▲
11 SP51-2-Size Impeller 1
12 SP40-215 Backplate Gasket 1
13 SP51-1 Pump Head 1
14 SP51-13HC Pump Head Clamp 1
▲Included in SP51-SK Seal Kit
2” Inlet x 2” Outlet available upon request

8
\\SPARE PARTS SP61
SP61 Spare Parts
Item # Part Number Description Qty Kit
1SP61-19-56
SP61-19-184 Pump Adapter 1
2 SP26-51 Retaining Pin 1
3
SP6-61-184
SP6-61-215
SP6-61-256
Impeller Shaft 1
4 10B-1.5-HSP-NP Set Screw 2
5 SP61-11 Backplate 1
6 SP51-80C Ceramic Stationary Seal 1 ▲
7SP51-80T
SP51-80TC
Rotary Seal PTFE
Rotary Seal Ceramic 1▲
8 SP51-80N Seal O-Ring 1 ▲
9 SP51-80S Spring 1 ▲
10 SP61-2-Size Impeller 1
11 SP40-216 Backplate Gasket 1
12 SP61-1 Pump Head 1
13 SP61-13HC Pump Head Clamp 1
▲Included in SP61-SK Seal Kit
2” Inlet x 2” Outlet available upon request

9
\\SPARE PARTS SP81
SP81 Spare Parts
Item # Part Number Description Qty Kit
1 SP81-19-184 Pump Adapter 1
2 SP26-81 Retaining Pin 1
3
SP6-81-184
SP6-81-215
SP6-61-256
Impeller Shaft 1
4 10B-1.5-HSP-NP Set Screw 2
5 SP81-11 Backplate 1
6 SP81-80C Ceramic Stationary Seal 1▲
7SP81-80T
SP81-80TC
Rotary Seal PTFE
Rotary Seal Carbon 1▲
8 SP81-80N Seal O-Ring 1 ▲
9 SP81-80S Spring 1 ▲
10 SP81-2-Size Impeller 1
11 SP40-218 Backplate Gasket 1
12 SP81-1 Pump Head 1
13 SP81-13HC Pump Head Clamp 1
▲Included in SP81-SK Seal Kit

10
\\SEAL KITS
SP41 Seal Kit
SP41-SK-C
Item # Part Number Description Qty
5 SP51-80C Ceramic Stationery Seal 1
6 SP51-80C Rotary Seal - Carbon 1
7 SP51-80N Seal O-Ring 1
8 SP41-80S Spring 1
9 SP41-40 Impeller O-Ring 1
SP41 Seal Kit
SP41-SK-T
Item # Part Number Description Qty
5 SP51-80C Ceramic Stationery Seal 1
6 SP51-80T Rotary Seal - PTFE 1
7 SP51-80N Seal O-Ring 1
8 SP41-80S Spring 1
9 SP41-40 Impeller O-Ring 1
SP51 Seal Kit
SP51-SK-C
Item # Part Number Description Qty
7 SP51-80C Ceramic Stationery Seal 1
8 SP51-80C Rotary Seal - Carbon 1
9 SP51-80N Seal O-Ring 1
10 SP51-80S Spring 1
SP51 Seal Kit
SP51-SK-T
Item # Part Number Description Qty
7 SP51-80C Ceramic Stationery Seal 1
8 SP51-80T Rotary Seal - PTFE 1
9 SP51-80N Seal O-Ring 1
10 SP51-80S Spring 1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels SPI Pompe à eau
Manuels Pompe à eau populaires d'autres marques

Sykes AmeriPumps
Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX
DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric
Franklin Electric IPS Manuel utilisateur

Xylem
Xylem e-1532 Series Manuel utilisateur

Milton Roy
Milton Roy PRIMEROYAL Manuel utilisateur












