SpeedComfort Trio Set Manuel utilisateur
Installation and
User Instructions
February 2021
Version 03.00
Disclaimer
SpeedComfort makes no representations or warranties with respect to this manual and, to the maximum
extent permitted by law, expressly limits its liability for breach of any warranty that may be implied to
the replacement of this manual with another. Furthermore, SpeedComfort reserves the right to revise
this publication at any time without incurring an obligation to notify any person of the revision.
The information provided in this documentation contains general descriptions and technical
characteristics of the performance of the products contained herein. This documentation is not intended
as a substitute for and is not to be used for determining suitability or reliability of these products
for specic user applications. Neither SpeedComfort nor any of its aliates or subsidiaries shall be
responsible or liable for misuse of the information that is contained herein. If you have any suggestions
for improvements or amendments or have found errors in this publication, please notify us.
Failure to observe this information can result in injury or equipment damage.
Copyright © 2021 by SpeedComfort
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any
form or by any means, including photocopying, recording, or other electronic or mechanical methods,
without the prior written permission of the manufacturer. For permission requests, write to the
publisher, addressed “Attention: Permissions Coordinator,” at the address below.
SpeedComfort
Antwoordnummer 7200
3734 ZW Den Dolder
The Netherlands
Tel: +31 85 666 62 23
Email: info@speedcomfort.com
Website: www.speedcomfort.com
3
Table of Contents
1. Preface 4
1.1. Description of the User 4
1.2. Conventions Used in this Manual 4
1.3. Explanation of Safety Warnings 4
1.4. Retaining Instructions 4
1.5. Obtaining Documentation and Information 5
2. Description of the Product 6
2.1. Intended Use and Reasonably Foreseeable Misuse 6
2.2. System Overview 6
2.3. Technical Data 7
2.4. Main components 8
3. Safety Instructions 9
3.1. How to Use the Product Safely 9
4. Installation 11
4.1. Determine the type of your radiator 11
4.2. Connect the SpeedComfort to the Radiator 12
4.3. Optimize the Central Heating 18
5. Maintenance 19
5.1. How to Maintain the SpeedComfort 19
6. Troubleshooting 20
7. Disposal 23
7.1. Disposal of the Product 23
7.2. Disposal of Packaging Waste 23
1. Preface
1.1. Description of the User
This installation manual is intended for the end-user, the general homeowner, who wants to
install one or more SpeedComforts on the radiators in his home. The user does not need to
be skilled, trained or certied to install the SpeedComfort.
1.2. Conventions Used in this Manual
The following style conventions are used in this document:
Bold
Names of product elements
Italic
Emphasis (for example a new term)
1.3. Explanation of Safety Warnings
Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor
or moderate injury.
Notice indicates information considered important, but not hazard-related.
1.4. Retaining Instructions
Read and understand this manual and its safety instructions before using this product.
Follow all the instructions. This will avoid re, explosions, electric shocks or other hazards
that may result in damage to property and/or injuries.
The product shall only be used by persons who have fully read and understand the contents
of this user manual.
5
Ensure that each person who uses the product has read these warnings and instructions and
follows them.
Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
The manufacturer is not liable for cases of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
1.5. Obtaining Documentation and Information
1.5.1. Internet
The latest version of the documentation is available at the following address:
https://www.speedcomfort.nl/media/downloads/SpeedComfort_manual.pdf
1.5.2. Ordering documentation
Documentation, user instructions and technical information can be ordered by calling
SpeedComfort at +31 85 666 62 23.
1.5.3. Documentation feedback
If you are reading SpeedComfort product documentation on the internet, any
comments can be submitted on the support website. Comments can also be sent to
UKsupport@speedcomfort.com.
We appreciate your comments.
1.5.4. Support and service
For information, questions, technical assistance, service or ordering user instructions please
contact:
SpeedComfort
Antwoordnummer 7200
3734 ZW Den Dolder
The Netherlands
Tel: +31 85 666 62 23
Website: www.speedcomfort.com
2. Description of the Product
2.1. Intended Use and Reasonably Foreseeable Misuse
The SpeedComfort is intended to be used as a ventilator that is intended to be attached to a
radiator or convector, which is connected to the central heating system. The SpeedComfort is
intended to draw heat from the radiator to help heat the room more eectively.
The product may only be used in accordance with the instructions described in this manual.
Any use other than those described in this manual is considered as non-intended use. This
will also invalidate the warranty.
2.2. System Overview
This product contains several components that form a system.
The SpeedComfort is the main component. The SpeedComfort is connected to a power
adapter and a temperature sensor. For a wide radiator (plates 70mm or more apart) this is
all that is needed, except for some optional cables. For other radiators, simply reposition the
magnetic sliders or feet:
•For a narrow radiator (plates less than 70mm apart), position the magnetic sliders
with the magnet facing upwards, two on each side.
•For a single plate radiator, position the magnetic sliders with all four on one side
and the magnet facing up.
•For a convector, position the four integrated feet in the holes provided on the
underside of the SpeedComfort.
Additional SpeedComforts can be connected to each other making use of the cables (30cm,
60cm or 120cm). These cables can also be used to extend the power adapter or temperature
sensor cables.
7
2.3. Technical Data
Parameter Unit
Product name SpeedComfort
Technical lifespan: SpeedComfort 10 years
Technical lifespan: Power adapter 4 years
Power 0.55 W
Annual energy consumption < 1 kWh
Noise level < 20 dB(A)
Airow 30 m3/hour
Width x length 7cm x 34cm
Output 12 V/DC
Power supply 100-240V; 0.25A 230V AC
Operating temperature range -20°C to +85°C
Storage temperature range -40 °C to +85°C
Relative humidity during use and storage max. 80% (non-condensing)
2.4. Main components
D
E F G H
I
A
C
B
I
A. SpeedComfort
B. Adjustable magnets (4x)
C. Feet (4x)
D. Power adapter
E. Temperature sensor (with Velcro)
F. Connecting cable (included with Duoset, Trioset and Extension Set)
G. 60 cm cable (optional)
H. 120cm cable (optional)
I. Dummy blocks (4x - without function)
9
3. Safety Instructions
Read and understand this manual and its safety instructions before using the
SpeedComfort and matching components.
3.1. How to Use the Product Safely
3.1.1. Safety information for vulnerable people
•Never leave children alone with packaging material. There is a risk of
suocation.
•Children should not play with the product. This product is not a toy.
•Do not install the product if you have reduced physical, sensory or mental
capabilities.
•Do not allow installation of the product by persons (including children) with
reduced physical, sensory or mental capabilities.
3.1.2. Safety information related to the intended use
•Use this product only as a radiator ventilator by attaching it to a radiator. Follow
the instructions in this manual to do so.
3.1.3. Product limitations and restrictions
•Do not use any sharp objects near the fans.
•Keep the product away from open re, soldering irons, or other hot tools as this
could damage the product.
3.1.4. Installation safety information
•Lift, handle and transport the product with great care.
•Pay attention and be careful when installing an electrical product. Do not
install the product if you are not able to concentrate properly, or if you may
faint or if you are under the inuence of medication, alcohol or drugs.
•Before connecting the power adapter to the wall socket, ensure that the local
voltage corresponds to the value on the product. The maximum permissible
voltage is 230V.
•Connect the product to a properly installed and easily accessible wall socket.
Make sure the product can be disconnected from the power supply at any time.
3.1.5. Safety information regarding the use
•Never use the product outdoors. The product is intended for indoor use only.
•Check all components (including cables) for any damages before installing the
product. Immediately remove the power adapter from the wall socket in the
event of visible damage, strong odour or overheating of the components.
3.1.6. Maintenance safety information
•Never touch the product or power adapter with wet hands.
•Keep the product away from moisture. Take care when cleaning the product or
radiator to which it is attached. Make sure no water enters the product through
the fans.
3.1.7. Service and repair safety information
•Do not attempt to open, modify or repair the product. Alterations or
modications of this product are not permitted. This will void the warranty.
Table des matières
