Regulatory Compliance
Radio Frequency Interference Requirements
Radio Frequency Interference Requirements - Canada
Symbol RF products are designed to be compliant with the rules and regulations
in the locations into which they are sold and will be labeled as required.
The majority of Symbol RF devices are type approved and do not require the
user to obtain license or authorization before using the equipment.
Any changes or modifications to Symbol Technologies equipment not expressly
approved by Symbol Technologies could void the user’s authority to operate
the equipment.
European standards dictate maximum radiated transmit power of 100mW
EIRP and frequency range 2.400 - 2.4835 Ghz.
France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz
frequency range.
Belgium outside, the equipment is to be restricted to the 2.460 - 2.4835 GHz
frequency range.
Operation in Italy requires a user license.
This Class A digital apparatus meets the requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du Reglement sur le
Materiél Brouilleur du Canada.
The European variant is intended for use throughout the European Economic Area,
however authorization for use restricted as follows:
To comply with FCC and Industry Canada exposure requirements,
antennas that are mounted externally at remote locations or
operating near users at stand-alone desktop or similar
configurations must operate with a minimum separation of 20 cm
from all persons.
"
"
"
"
This device has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the Federal Communications Commissions
Rules and Regulation. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense. However, there is no guarantee that interference will not occur
in a particular installation
If the equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
"
"
"
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that which
the receiver connected.
European Economic Area
Copyright
Patents
Copyright © 2000 by Symbol Technologies, Inc. All rights reserved.
No part of this publication may be modified or adapted in any way, for any purposes
without permission in writing from Symbol Technologies, Inc. (Symbol). The material in this
manual is subject to change without notice. Symbol reserves the right to make changes to
any product to improve reliability, function, or design. No license is granted, either expressly
or by implication, estoppel, or otherwise under any Symbol Technologies, Inc., intellectual
property rights. An implied license only exists for equipment, circuits And subsystems
contained in Symbol products.
Symbol, the Symbol logo and Spectrum24 are registered trademarks of
Symbol Technologies, Inc.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged IBM is a
registered trademark of International Business Machine Corporation.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Novell and LAN Workplace are registered trademarks of Novell Inc.
Toshiba is a trademark of Toshiba Corporation.
Symbol Technologies, Inc.
One Symbol Place
Holtsville, NY
11742-1300
73-20992-01
Revision A
*73-20992-01*
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No.
4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;
4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717;
5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520;
5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232;
5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553;
5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498;
5,304,786; 5,304,788; 5,306,900;5,321,246; 5,324,924; 5,337,361; 5,367,151; 5,373,148;
5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198;
5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042;
5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469;
5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680;
5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139;
5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043;
5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287;
5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,850,078;
5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478;
5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285;
6,002,918; 6,021,947; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297;
6,068,190; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918;
D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500;
D419,548; D423,468; D424,035
Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan);
European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938;
Italy 1,138,713
Access Point
AP-3020/AP-3021
Quick Reference Guide
www.symbol.com
Declaration of Conformity
Customer Support
North American Contacts
International Contacts
We, Symbol Technologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA
declare under our sole responsibility that the product
To which this product relates, is in conformity with the following standards and/or other
normative documents.
ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread Spectrum
ETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systems
EN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology Equipment
We hereby declare that all essential radio test suites have been carried out and
that the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10(5) and detailed in
Annex IV of Directive 1999/5/EC has been followed with the involvement of the
following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ
Identification mark:
0168 The equipment also carries the Class 2 equipment identifier
The technical documentation relevant to the above equipment can be made available
for inspection on application to:
Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UK
Symbol Technologies is committed to providing its customers with world-class customer
service and technical support. The Symbol Support Center operates as the single point of
contact for any technical problem, question or support issue.
The Support Center operates all year, 24 hours a day, staffed by full-time professional
Technical Specialists.
If Symbol cannot solve the problem immediately within its tiered, technical-support center,
access to all technical disciplines within Symbol become available for further assistance and
support. First response / contact within 24 hours or one business day. Responses by email,
fax or telephone.
Inside North America, contact Symbol at:
Symbol Technologies, Inc.
One Symbol Plaza, Holtsville, New York 11742-1300
Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990
Symbol Support Center:
Outside North America, contact Symbol at:
Symbol Technologies Technical Support
12 Oaklands Park; Berkshire, RG41 2FD, United Kingdom
Tel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213
Spectrum24, LA-302C, 2Mbps Type II Radio Card without microprocessor
Dornu Narnor Senior Director, Regulatory 7 September 2000
(name) (title) (signature of authorised person) (date)
