Speco Intensifier H HINT81H Manuel utilisateur

Installation and

Operation Manual

SPECO 960H series

HINT81H

nnn

OOO

uuu

ddd

2User Information

Explanation of two Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance-(servicing) instructions in the

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE

ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THE UNIT TO RAIN OR MOISTURE"

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

literature accompanying the appliance.

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

User Information

Regulatory Notice 3

Regulatory Notice

This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment

is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at their own

expense.

Changes or modifications not expressly approved

by the manufacturer could void the user's authority

to operate the equipment.

WARNING

When this camera is installed near equipment,

like a wireless communication device that emits

a strong electromagnetic field, some irregularity

such as noise on the monitor screen may happen.

CAUTION

• This installation should be made by a qualified service person

and should abide to all local codes.

Contents

1. 6

2. Features 7

3.1.

Composition

Parts

6.1.

6.2.

6.3.

6.3.1.

6.3.2.

6.3.3.

6.3.4.

6.3.5.

6.3.6.

6.4.

6.4.1.

6.4.2.

6.4.3.

6.5.

6.5.1.

6.5.2.

6.5.3.

6.5.4.

6.5.5.

6.6.

6.6.1.

6.6.1.1.

6.6.1.2.

Operating Camera

Camera OSD menu

PRESET

EXPOSURE

LENS

(DC or ESC)

BRIGHTNESS

– Adjusts brightness of the image.

SHUTTER

– Adjusts the shutter speed.

FLK

(FLICKERLESS)

AGC

(Auto Gain Control)

INTENSIFY

WHITE BAL.

– White Balance Setup

ATW

PUSH

MANUAL

DAY / NIGHT

AUTO

DAY

– For color mode only.

NIGHT

– For BLACK and WHITE mode only.

EXTERN

IRED

BACKLIGHT

BLC

(back-light compensation)

, HLC

(high-light compensation)

OFF

– Disable

BLC

– To lighten a darker part of the image.

4.1.

4.1.1.

4.2.

Installation

Connection

Make the connections

Camera mounting

5.1.

5.1.1.

5.1.2.

Name and Functions

Camera controls

Menu navigation

Monitoring and switches

Contents

Important Safety Instructions

Contents 5

7.1.

Troubleshooting

Resolving problems

8.1.

8.2.

Technical Data

Specifications

– HINT81H

Dimensions

6.6.1.3.

6.6.2.

6.6.2.1.

6.6.2.2.

6.6.2.3.

6.7.

6.8.

6.8.1.

6.8.2.

6.8.3.

6.8.4.

6.8.5.

6.8.6.

6.8.7.

6.8.7.1.

6.8.7.2.

6.8.8.

6.8.8.1.

6.8.8.2.

6.9.

6.9.1.

6.9.1.1.

6.9.1.2.

6.9.1.3.

6.9.2.

6.9.3.

6.9.4.

6.9.5.

6.9.6.

6.9.7.

6.9.8.

6.10.

6.10.1.

6.10.2.

HLC

– Force blocking the bright part.

D-WDR

(Digital Wide Dynamic Range)

, DEFOG

OFF

– Disable

D-WDR

DEFOG

SPECO DNR

– Digital Noise Reduction

IMAGE

SHARPNESS

– To adjust SHARPNESS of the image.

CHROMA

– To adjust the color intensity of the image.

MONITOR

SHADING

H-MIRROR

– Horizontal image flip

POSI/ NEGA

– Invert the colors of the images

MOTION

– Motion detect

OFF

– Disable

PRIVACY

OFF

– Disable

SYSTEM

OSD

– On Screen Display

CAM TITLE

ID DISPLAY

FONT COLOR

CAM ID

– CAMERA ID (RS-485 Communication ID)

SYNC

BAUDRATE

COAXIAL

DEFECT

(Pixel defect compensation)

LANGUAGE

VERSION

– Camera Software History ..

EXIT

SAVE

PRESET

– In the state of the EXIT, press menu button exit.

Important Safety Instructions

1. Important Safety Instructions

10.

11.

12.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

Do not install unit near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

Only use attachments/accessories specified by the

manufacturer.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

Refer all servicing to service personnel. Servicing is required

when the apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Do not install the camera in extreme temperature conditions.

Operate the camera under conditions where temperatures

are within -10°C(14°F) to +50°C(122°F). Especially be careful

for ventilation under high temperature.

Features 7

2. Features

Min Illumination (F1.2, 30IRE, ICR B/W)

Works under extreme low illumination conditions:

– INTENSIFIER [X32] : Color 0.005 Lux

Variety of convenience functions

Provides special functions for advanced manipulation of

your device, including:

– Adjustable sharpness enhancement [700 TV Lines]

– Adjustable privacy mask [8 masks]

– Adjustable motion detection [4 areas]

– SPECO DNR [Digital Noise Reduction]

– INTENSIFIER [X32]

– BLC [Backlight Compensation]

– POSI / NEGA

– MIRROR [Horizontal]

– Coaxial communication [Pelco-C]

D-WDR (Digital Wide Dynamic Range)

Greatly improves image quality and detail even in backlight

conditions, by increasing exposure in dark areas while

decreasing it in bright areas, resulting in a corrected image

with clear details in both bright and dark areas.

1/3 inch High Sensitivity CCD

Composition

3. Composition

3. 1. Parts

The camera unit consists of the following parts:

• CAUTION: Installation should only be performed by

qualified service personnel in accordance with the

National Electrical Code or applicable local codes.

No.

Guide pattern

Plastic anchors

Rubber pad

Dome base

Mounting screws

Dome cover

L-wrench for dome cover mounting

Parts

Installation 9

4. Installation

4. 1. Connection

Connecting to Power and Video

4.1.1. Make the connections

• The wire is non-polarized.

• Use 24V AC power source or 12V DC power source.

4. 2.

No.

Video Output

Power Input

Function

Terminal Color

Remarks

Yellow

Red

1.0 Vp-p

24V AC (±20%) / 12V DC (±10%)

12V DC

24V AC

AC AC

Video Output

GND

– Stick the guide pattern on the wall or ceiling.

– Drill three holes according to the guide pattern then insert

anchors into the drilled holes

– Draw out power / video wires to the connecting places.

– Attach the camera base to the ceiling or wall using the supplied

three screws.

– Adjust desired focus and scene by turning and moving bracket

by hand.

– Align dome cover over base.

– Fix the dome cover on the base by covering.

Camera mounting

To mount the camera:

Name and Functions

5. Name and Functions

5. 1. Camera controls

• NOTE: Push the Joy stick for one second, and the OSD

appears on the screen. Move the Joy Stick up, down, left

& right to control the OSD functions.

5.1.1. Menu navigation

No.

Down

Left

Right

Menu(Center)

Parts

Move the cursor up in the screen.

Move the cursor down in the screen.

Move the cursor left in the screen.

Move the cursor right in the screen.

Press straight down to open menu or set.

Remarks

5.1.2. Monitoring and switches

No.

Service

monitor

connector

Parts

When installing the camera, connect a

service monitor to set angle of view and

focus of the screen.

(This output cannot be used simultaneously

with the main video output.)

Remarks

DOWN

RIGHT

LEFT

<––

DOWN

RIGHT

LEFT

Table des matières

Autres manuels Speco Caméra de sécurité

Speco

Speco CVC61iLTB Manuel utilisateur

Speco

Speco OIPC72B7G Manuel utilisateur

Speco

Speco VL12 Manuel utilisateur

Speco

Speco O5D2 Manuel utilisateur

Speco

Speco O8VD3M Manuel utilisateur

Speco

Speco CVC-105CM Manuel utilisateur

Speco

Speco O2T7 Manuel utilisateur

Speco

Speco CVC-960IR Manuel utilisateur

Speco

Speco CCLR13D1G Manuel utilisateur

Speco

Speco VL-183 Manuel utilisateur

Speco

Speco O4VT1NG Manuel utilisateur

Speco

Speco O2VT1V Manuel utilisateur

Speco

Speco CVC-770PH Manuel utilisateur

Speco

Speco O5T2 Manuel utilisateur

Speco

Speco O2VT1N Manuel utilisateur

Speco

Speco ProVideo CVC-980IR Manuel utilisateur

Speco

Speco CVC-185DC Manuel utilisateur

Speco

Speco O4VFDM Manuel utilisateur

Speco

Speco O4LT1M Manuel utilisateur

Speco

Speco O8FD1 Manuel utilisateur

Speco

Speco VL-650 Series Manuel utilisateur

Speco

Speco O5DH Guide de référence

Speco

Speco CVC-61HRB Manuel utilisateur

Speco

Speco VL-6WMTDV Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur