Speco VM-15LCD Manuel utilisateur
TFT LCD Monitor
1
TFT LCD User Manual
Table of Contents
1. Introduction and Package Contents ...................................................................................................... 2
2. System Requirements and Hardware Installation .................................................................................. 3
3. Monitor and OSD Controls .................................................................................................................. 4
4. OSD Control Function List .................................................................................................................... 6
Main Menu (VGA Mode) ............................................................................................................................................ 6
Main Menu (Video Mode) ........................................................................................................................................... 19
Hot Key ..................................................................................................................................................................... 22
5. Caring for Your LCD Monitor ............................................................................................................... 23
6. Frequently Asked Questions ................................................................................................................ 24
7. Regulations, Warnings and Maintenance ............................................................................................. 26
8. Technical specifications ....................................................................................................................... 27
TFT LCD Monitor 2
TFT LCD User Manual
1.
Introduction and Package Contents
Introduction
Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring
easy to use OSD controls and built in speakers, you will find this monitor both easy to use and a pleasure to look at.
This monitor offers a maximum resolution of 1024x768 pixels and a refresh rate up to 75Hz translating into a flicker free that is
easy on your eyes. With a 15" diagonal measurement, this display is almost equivalent in size to standard 17" CRT displays.
Vibrant colors and sharp images without the radiation, emissions and hazards of regular CRT monitors make this LCD monitor
the right choice!
Package Contents
15” LCD Monitor
12V DC Adapter/Power cord
D-Sub 15-pin VGA connector Cable
User's Guide
Audio Cable
The following sections in this guide give clear, step-by-step descriptions of the installation process and explain how to use this
monitor for optimum results.
Please pay attention to the Regulations and Warnings Section of this user’s manual before setting up the display monitor.
Failure to do so may inadvertently result in personal injuries or machine damage.
TFT LCD Monitor
3
TFT LCD User Manual
2.
System Requirements and Hardware Installation
System Requirements
Check whether the computer on which you want to install the LCD monitor and related software complies with the following
minimum system requirements:
Pentium 166MHz CPU or better
32MB system memory
Windows 95/98/NT/2000, IBM OS/2, Linux, Unix*
256 color display or better
Audio output (1V peak to peak) capability
Connecting the LCD monitor to a PC
Connect LCD monitor to a PC with a D-sub 15-pin cable.
Connect the audio cable from the rear of the LCD monitor to the line-out of your audio card - this step may be omitted if you
do not plan to use the LCD monitor's internal speakers
Connect the DC power plug to the LCD monitor
Insert the power cord into power adapter
Turn on the PC and the LCD monitor
Use the OSD (On Screen Display) controls to set up the LCD display
DC12V VIDEO-IN
AV
AUDIO-IN
VGAS-VIDEO
PC
AUDIO-IN
TFT LCD Monitor 4
TFT LCD User Manual
3.
Monitor and OSD Controls
Monitor and OSD Controls
The LCD color monitor has a simple control layout for controlling the monitor and OSD (On Screen Display) functions. The table
below summarizes the control keys and their related functions.
Keys Function Description
POWER Pressing this key turns he display system power ON/OFF.
MENU Enter the main menu of the on-screen display (OSD).
AUTO Automatically adjusts H-Position,V-Position,Pixel Clock and Phase for an
optimal image.
SELECT Select control functions or adjust display settings.
ADJUST Increase or decrease the value of the chose item.
MENU SELECT ADJUST AUTO POWE
R
TFT LCD Monitor
5
TFT LCD User Manual
LED Status Display
The following table describes the various power states of the LCD monitor as represented by different LED color.
Power State LED Color
On Green
Standby Orange
Off Orange
No power Blank
TFT LCD Monitor 6
TFT LCD User Manual
4.OSD Control Function List
Main Menu (VGA Mode)
If you push the “MENU” key, will appear this main menu page, you can use the “UP” or “ADJ. +” AND “Down” or “ADJ. –“ key
(appear Pic1) to select the function you need.
Pic1
The working resolution and frequency are shown at end of the main page.
TFT LCD Monitor
7
TFT LCD User Manual
AUTO SETUP
If you select AUTO SETUP function and push the SELECT key (appear Pic2) will active the auto adjusting for the picture.
Pic2
BRIGHTNESS
If you select BRIGHTNESS function and push the SELECT key (appear Pic3), you can push ADJ+ or ADJ- key to increase or
decrease backlight current of the inverter. You can push SELECT key again to quit this function.
Pic3
TFT LCD Monitor 8
TFT LCD User Manual
CONTRAST
If you select CONTRAST function and push the SELECT key (appear Pic4), you can push ADJ+ or ADJ- key to increase or
decrease video gain of the picture. You can push SELECT key again to quit this function.
Pic4
DISPLAY
If you select DISPLAY ADJUST function and push the SELECT key that will into the sub-page (appear Pic5) to adjust
display’s function of the picture.
Pic5
TFT LCD Monitor
9
TFT LCD User Manual
1. H. POSITION
If you select H.POSITION function and push the SELECT key (appear Pic6), you can push ADJ+ or ADJ- key to shift Left
or Right the picture in horizontal position. You can push SELECT key again to quit this function.
Pic6
2. V. POSITION
If you select V.POSITION function and push the SELECT key (appear Pic7), you can push ADJ+ or ADJ- key to shift UP or
DOWN the picture in vertical position. You can push SELECT key again to quit this function.
Pic7
TFT LCD Monitor 10
TFT LCD User Manual
3. CLOCK
If you select CLOCK function and push the SELECT key (appear Pic8), you can push ADJ+ or ADJ- key to increase or
decrease the pixel clock frequency of the picture. You can push SELECT key again to quit this function.
Pic8
4. PHASE
If you select PHASE function and push the SELECT key (appear Pic9), you can push ADJ+ or ADJ- key to shift the pixel
clock phase of the picture. You can push SELECT key again to quit this function.
Pic9
5. In the VGA mode, the SHARPNESS, HUE and SATURATION functions are disable.
6. EXIT
If you select EXIT function and push the SELECT key, this sub-page will back to OSD Main page.
Autres manuels pour VM-15LCD
4
Table des matières
Autres manuels Speco Moniteur
Speco
Speco M17VLED Manuel utilisateur
Speco
Speco VM-901B Manuel utilisateur
Speco
Speco VMS-2 Manuel utilisateur
Speco
Speco VM-901B Manuel utilisateur
Speco
Speco VM-1201W Manuel utilisateur
Speco
Speco VM-15LCD Manuel utilisateur
Speco
Speco VM22TSLCD Manuel utilisateur
Speco
Speco M17LCBVH3 Manuel utilisateur
Speco
Speco VGA17LCD Manuel utilisateur
Speco
Speco VM-5LCD Manuel de la liste des pièces
Speco
Speco PVM10 Manuel utilisateur
Speco
Speco M284K Manuel utilisateur
Speco
Speco VM8RM2LCD Manuel utilisateur
Speco
Speco M185LCBV4 Manuel utilisateur
Speco
Speco VMST7 Manuel utilisateur
Speco
Speco VM-1005C Manuel utilisateur
Speco
Speco VM-905C Manuel utilisateur
Speco
Speco Color Video Monitor Manuel utilisateur
Speco
Speco VM-1701B Manuel utilisateur
Speco
Speco VM-10LCD Manuel utilisateur
