
INTRODUCTION
The SC-LLC-200 from Specified Controls is a versatile, 24VAC powered lead/lag controller offering
true dual stage control to balance the operating run time between HVAC equipment as well as
other redundant devices. The controller has dedicated terminals for 24VAC power, 2 inputs and 2
outputs. LEDs provide visual indication for power and output status.
SEQUENCE OF OPERATION
When 24 Volt power is first applied to the 24VAC terminals 7and 8 on the SC-LLC-200, Unit 1 and
Unit 2 output contacts remain open. When 24 Volts is applied to input terminal 1, Unit 1 output
contacts go closed and Unit 2 contacts remain open. When 24 Volts is removed from terminal 1 for
at least 10 seconds, Unit 1 output contacts open. When 24 Volts is reapplied to terminal 1, Unit 1
output contacts remain open and Unit 2 output contacts go closed. The lead/lag sequence is
reversed every time 24 Volts is removed from terminal 1 for more than 10 seconds and then
reapplied.
In a dual stage application, 24 Volts applied to terminal 2 will close the lag output contacts. As long
as 24 Volts is maintained on terminal 1, the lag output can be cycled on and off.
The SC-LLC-200 Lead/Lag Controller must be powered from the same 24 Volts as Unit 1 control
circuit or a relay will be required.
WIRING DIAGRAMS
The wiring diagrams illustrated in this installation manual represent a sampling of the many ways
the SC-LLC-200 can be applied for lead/lag control.
The SC-LLC-200 is an operating controller only and depending on the application, it is the
responsibility of the installer to verify that the SC-LLC-200 complies with all electrical and/or
plumbing codes.
SPECIFICATIONS
Input: 24 VAC
Frequency: 60/60 Hz
Contact Rating: 12 Amps @ 24 VAC
PC Board Dimensions: 3.25” W x 5.5” H
Mounted on Snap-Track
Controller With SC-LLC-200-ME with metal enclosure
Optional Enclosures: SC-LLC-200-WPE with weather-proof plastic enclosure
5351 East Thompson Road, Suite 128, Indianapolis, IN 46237
Phone 888.359.0365
www.specifiedcontrols.com 06-1072-083011