Soundstream SPL-69 Manuel utilisateur

2 Ohm Nominal

Triax Speaker

OWNER’S MANUAL

69.pub

page 1 Friday, September 10, 1999 21:01

HARDWARE

AND

CONNECTOR

PARTS LIST

SPL 69 Coaxial Speaker

Congratulations on your purchase of the Soundstream SPL 69 Coaxial

Speaker. When used with a high quality 2 ohm rated power amplifier,

the SPL 69 will provide exceptional performance.

As with all high quality car audio components, professional installation

is recommended. Your dealer’s knowledge and experience can ensure

a problem-free, cosmetically integrated installation. If you plan on

installing the SPL 69 speaker yourself, please review this Owner’s

Manual first before attempting installation. In addition, it is a good idea

to keep the manual for future reference.

SPL 69 Serial Number ______________________________________

Date of Purchase ___________________________________________

Date of Installation _________________________________________

Dealer’s Name ____________________________________________

Before beginning your installation, please check to see that the number

of parts contained in your box match the list below:

Hardware

8 each -1 1/2” #8 sheet metal screws (for mounting SPL 69/grille

frame))

Connectors

4 each -1/4” tab female Gold insulated slip-on connectors

69.pub

page 2 Friday, September 10, 1999 21:01

FEATURES

Midrange/Woofer

The SPL 69's Midrange/Woofer is an excellent performer with a

combination of high sensitivity, powerful bass and smooth response

throughout the audible range.

•Lightweight Cone designed for good rigidity and high sensitivity

•Polyether Surround for increased sensitivity

•2 Ohm Voice Coil for increased output

Dome Neodymium Tweeters

The SPL 69's coaxially mounted tweeters provide higher power handling

and extended frequency response.

•1" Textile dome for improved power handling and linear response

•1/2 " Super Tweeter for extended highs

•Ferrofluid-immersed Voice Coils enhance heat dissipation

Passive Crossover Network

•High Quality, Precision Design with 2 poles on the tweeter and 1

pole on the super tweeter

•Acoustic Summation design combines the crossover with the

speaker's natural roll-off for a steeper slope and increased power

•Dynamic tweeter protection allows for improved power handling

and continuous output

2 Ohm Nominal System Impedance

The 2 Ohm impedance design of the SPL 69 provides an overall 3 dB

increase in output compared to a 4 Ohm design.

•Effectively a doubling of Sound Pressure Level -- with the same

amplifier voltage

•More stable, phase coherent load than two 4 Ohm speakers

operating in parallel

69.pub

page 3 Friday, September 10, 1999 21:01

•The first step in a successful installation is

thorough planning. Choose the location for your

speaker components carefully. Follow these

suggestions to ensure proper imaging and the

best performance:

•Choose a location that offers the least

obstruction of sound to your ears.

•Always check behind the chosen mounting

locations to make sure that there are no

obstructions (e.g., trunk springs, gas tank,

window track) or wires in the way, as well as to

make sure that there is ample support on which

to mount the components.

LOCATION

AND

MOUNTING

69.pub

page 4 Friday, September 10, 1999 21:01

INSTALLING

THESPL69The SPL 69 can be mounted on the front or rear of

a panel; gaskets are provided for both options. The

bolt hole configuration will fit a variety of American,

Asian and European OEM patterns making it ideal

for direct placement. Best performance is achieved

when the speaker is securely mounted to a door

panel or rear deck. There should be no gaps

between the speaker and the mounting surface, as

this will impair its low frequency performance. Be

certain that both the panel and the speaker are

securely mounted to prevent unwanted vibration.

1) Mark the speaker location by using the

template provided.

2) Cut the opening and debur the edges with a

file.

3) Hold the speaker in place against the mounting

surface and mark the mounting bolt holes.

6) Drill the appropriate size hole for the screws

provided.

7) Place the SPL 69 onto the trim ring, make the

speaker wire connections, then install the

speaker/trim ring assembly to the panel using

69.pub

page 5 Friday, September 10, 1999 21:01

SPL 69 Wiring Diagram

The figure below shows wiring for the SPL 69 speaker. It is

important to make sure that all connections are in phase; that

is positive (+) is connected to positive (+), and negative (-) is

connected to negative (-) since an out-of-phase connection

will cause a dislocated image and low bass output. We

suggest using premium cable. The connectors provided with

this system will accommodate wire from 12 gauge to 16

gauge.

WIRING

Head Unit

Amplifier

SPL 69

69.pub

page 6 Friday, September 10, 1999 21:01

SPECIFICATIONS

SPL 69 Specifications

Frequency Response 40 Hz -22,000 Hz ±3dB

Sensitivity 94 dB SPL at 1 meter (2.83 Volts)

100 dB SPL at .5 meter (2.83 Volts)

Continuous Power Handling 80 watts

Peak Program Power Handling 160 watts

Nominal Impedance 2Ω

Crossover Slope Rate 12 dB/octave ASC

Frequency Response 3000 Hz -20,000 Hz ±3dB

Sensitivity 94 dB SPL at 1 meter (2.83 Volts)

Nominal Impedance 4Ω

Nominal Tweeter Diameter 1”

Super Tweeter

Frequency Response 8000 Hz -22,000 Hz ±3dB

Sensitivity 93 dB SPL at 1 meter (2.83 Volts)

Nominal Impedance 4Ω

Nominal Tweeter Diameter 1/2”

Dimensions

Nominal Driver Dimensions 6" x 9"

Mounting Depth 3 1/2"

Dome Tweeter

69.pub

page 7 Friday, September 10, 1999 21:01

120 Blue Ravine Road  Folsom  California 95630 USA

tel 916.351.1288 fax 916.351.0414

(Rev A, 8/26/97)

69.pub

page 8 Friday, September 10, 1999 21:01

Table des matières

Autres manuels Soundstream Intervenants

Soundstream

Soundstream Street Hopper 5 Plus Manuel utilisateur

Soundstream

Soundstream H-540DiMT Manuel utilisateur

Soundstream

Soundstream woofer Guide de démarrage rapide

Soundstream

Soundstream H-300BAR Manuel utilisateur

Soundstream

Soundstream H-305BAR Manuel utilisateur

Soundstream

Soundstream H-400Di Manuel utilisateur

Soundstream

Soundstream SPLX-HF Mode d'emploi

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur