Soundcore BeatLight B32 Manuel utilisateur
101
User Manual
Soundcore BeatLight B32
1
What's In The Box
16.4ft RGBIC Light Strips
x2
Control Box
x1
Adhesive Hooks
x10
Quick Start Guide
x1
Alcohol Prep Pads
x2
Quick
Start
Guide
Power Adapter
x1
Testing
• Spread through the light strips straight and power on to test whether they
light normally.
T Ensure to correctly connect the control box with the light strips.
1
2
3
2
Installing
1. Choose a dry, clean and smooth surface and wipe off the dust with
alcohol prep pads.
2. Tear off the adhesive tape and paste the light strips on the chosen surface
immediately.
T Avoid bending on the LED beads.
3. Press firmly to remove the air between the light strips and the surface.
4. Use the provided adhesive hooks to reinforce it if necessary.
3
5. Connect to the power adapter and then the power supply.
1
2
3
Control Box
• Press to switch to the next light
pattern.
• Press twice to switch to the
previous light pattern.
• Press to power on or off.
Microphone
Press to enter/exit
PartyCast mode.
Connecting
Connected
• Press and hold for 5 seconds to reset
the connection.
Pairing
5s
Solid white
Flashing white slowly
4
Soundcore APP
Download the Soundcore app to enhance your experience.
• Connect, manage, and disconnect the device.
• Check product information.
• Upgrade the firmware.
• Set the timer for the lights to automatically turn on and off.
• Adjust and manage light patterns.
• Adjust the basic light colors and paints.
• Customize unique light effects (Color/Speed/Direction/Brightness).
• Make your own playlist and each track can be accompanied by multiple
light effects.
• Switch voice pickup modes (Built-in microphone/PartyCast).
• Adjust voice pickup sensitivity (High/Medium/Low).
• Enter PartyCast mode to sync with your PartyCast speaker.
5
Voice Pickup Modes
There are two voice pickup modes you can select from the
Soundcore app.
• Microphone: the light will be synchronized with the ambient sounds or
music. You can also adjust the voice pickup sensitivity of the microphone.
• PartyCast: wirelessly connect with your PartyCast speaker and the light
will be synchronized with the music played by the speaker, without noise
interference.
Rhythm & Motion
The light strips come with multiple preset light patterns both in
the rhythm and motion categories.
• Rhythm (marked with musical
note): Automatically sync with
the musical rhythms and create
musical visual effects.
• Motion: Block the ambient
sounds and purely enhance
the atmosphere as a visual
decoration.
6
PartyCast
PartyCast enables the light strips to wirelessly connect with your
PartyCast speaker, the ambient sounds will be blocked and the
light effects will be synchronized with the music played.
1. Read carefully the user manual of your PartyCast speaker and complete
the Bluetooth connection with your smartphone or tablet.
2. Activate PartyCast pairing mode of the PartyCast speaker.
3. Press the PartyCast button on the control box to enter PartyCast pairing
mode. Alternatively, select "PartyCast" to connect from in the app.
21
PAIRING
>2s
3
x1 CONNECTING CONNECTED
PartyCast LED Light Strips Status
Flashing white
slowly
Flashing white and orange
alternately Connecting
Solid white Flashing white rapidly then
resuming the previous light pattern Connected
T
How to check whether the PartyCast connection is successful or not?
Pause the music, clap your hands, and check the light strips' response.
• If the light strips respond with light effects, this means they are not connected
with the PartyCast speaker, the voice pickup source is from the microphone.
• If no light effects happen, it means already connected.
Still having problems? Please contact our customer service team via
7
Specifications
Power adapter for US &
Canada: BI24G-120200-AdU
Input: 100-240V~50/60Hz, 0.8A
Output: 12V 2A
Power adapter for EU:
BI24GH-120200-AdV
Input: 200-240V~50/60Hz, 0.4A
Output: 12V 2A
Power adapter for UK(GB):
BI24GH-120200-AdB
Input: 200-240V~50/60Hz, 0.4A
Output: 12V 2A
Input 12V 2A
Power consumption 24W
Length 5m/16.4ft x2
Bluetooth range 100m (Nil interference)
Troubleshooting
The light strip doesn't work.
• Make sure to correctly connect the
control box to the light strip and the
power adapter.
Failed to connect this
device to the app.
• Make sure to turn on Bluetooth on your
smartphone or tablet.
• Turn the light strip off, then turn it on to
try again.
• Keep the light strip 1m/3.28ft or closer to
your smartphone.
Cannot sync with music or
sounds.
• Keep the music source closer to the
control box.
• Clean out the microphone on the control
box.
Some LED beads do not
light up.
• Please contact our customer service
team.
8
Important Safety Instructions
Read all the instructions before using the product, refer to the information
on the exterior bottom enclosure for electrical and safety information before
installing or operating the product.
1. Store the product in a cool and dry place.
2. Do not store the product in a hot or humid environment.
3. Keep out of the reach of children.
4. Do not touch the product for a long time when powered on.
5. Power off and unplug the adapter when not use for an extended period of
time.
6. Do not connect the rope light to the supply while it is in the packing or
wound onto a reel.
7. Do not use the rope light when covered or recessed into a surface.
8. Keep away from any sharp objects. Do not open or bend the rope light.
9. Use of a power supply or charger not recommended or sold by the
product manufacturer may result in a risk of fire or injury to persons.
10.Operating temperature should be between 0°C to 40°C.
11.Do not disassemble the product or make unauthorized alterations to
the product; doing so may compromise safety, regulatory compliance,
system performance, and may void the warranty.
12.Do not clean the product with harmful chemicals or detergents.
13.Misuse, dropping or excessive force may cause product damage.
14.Do not subject the product to mechanical shock, crushing, or cutting.
15.Do not short-circuit the product or be short-circuited by other metal
objects.
16.Do not use the product in excess of its output rating. Overload outputs
above rating may result in a risk of fire or injury to persons.
17.Do not use the product that is damaged or modified. It may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
18.Do not connect the chain to the supply while it is in the packaging.
19.Have servicing performed by a qualified repair person using only identical
replacement parts. Servicing is required when the apparatus has been
9
damaged in any way:such as power supply or cord is damaged; liquid has
been spilled or objects have fallen into the apparatus; the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
20.Do not install this equipment near any heat sources or in a confined or
building-in space such as a bookcase or similar unit, and remain in good
ventilation conditions at an open site.
21.Only suitable for safe use in areas below 2000m above sea level. Suitable
for safe use in tropical and non-tropical areas.
22.Protect the power supply or cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus. Unplug this apparatus during lightning storms or
when unused for long periods of time.
WARNING: Use only power supplies/attachments/accessories specified by
the manufacturer.
Use only adapters below by Dong Guan Royal Intelligent Co.,Ltd. according
to different area.
Model(s) for US & Canada：BI24G-120200-AdU
Model(s) for EU: BI24GH-120200-AdV
Model(s) for UK(GB): BI24GH-120200-AdB
This product complies with the radio interference
requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3561
is in compliance with Directives 2014/53/EU.The full text of the EU
declaration of conformity is available at the following internet address:
https://www.soundcore.com/products
Maximum output power: 11.63 dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
The product is not under the Article 2 “Definitions” for ‘Light source’,
according to EU 2019/2020, because the x and/or y chromaticity
coordinates does not fall in the range of ‘Light source’.
Autres manuels pour BeatLight B32
1
Table des matières
Autres manuels Soundcore Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
