Bluetooth pairing with NFC
1.
Enable Bluetooth and
NFC
functions
on
your mobile device
2.
Hold phone nearthe
NFC
logo [logo)
on
VG3 unit
until mobile device connects and Bluetooth
LED
blinks slowly
3.
Press
OKjConnect
on your mobile device
to
complete pairing
4.
Play audio
Standard Bluetooth Pairing
1.
Enable Bluetooth
on
your mobile device
2.
Pair a new device: press the VG3 Bluetooth button
[Biuetooth
LED
will blink slowly)
3.
From Bluetooth menu
on
mobile device settings.
select "VG3
by
Soundcast_xxxxxx"
4.
Once paired, the Bluetooth
LED
becomes solid blue
~
Press & Hold Bluetooth button
for
(2) seconds and
beep is heard
to
re-enter pairing mode
to
pair a new
or
additional device.
~To
clear all devices
from
memory, press and hold the
Bluetooth button
for
[1
0)
seconds until the Bluetooth
LED
double blinks and third confirmation beep is heard.
Aux Input Mode
Plug external audio source into
3.5mm
jack
to
automatically switch
to
Aux Input mode as indicated
by
Aux
LED
turns
yellow. Remove
3.5mm
plug
to
switch
back
to
Bluetooth operation.
Qualcomm TrueWireless™ Stereo (TWS) Pairing
With
TWS, two VG3 units may be paired
for
synchronous
Bluetooth playback. Power off. volume and TWS mode
will
by
synchronized and may
be
controlled
from
either unit.
1.
Both speakers
must
be
powered
on
in
Bluetooth
mode [no Aux input connected)
2.
At
least one of the speakers
must
be paired
to
audio
source (as described above) Press and hold the
TWS
((1*1))
for
[2) seconds until a confirmation beep is
heard. The TWS
LED
will
start
to
blink slowly. Repeat with
the second VG3 unit
6
3.
When
paired, the TWS
LED
on
both units will show
both blue and orange [purple)
~
When
in
TWS
mode and
you
tum
off one unit,
the
other
unitwill
turn
off automatically
4.
Reconnecting: The TW8-paired units will re-connect
to
each
other
automatically
after
turning both units
on.
A
short
press of the TWS button
on
either unit allows
cycling through the TWS modes (stereo,
left/right,
off)
as indicated below;
•
LED
blue and orange:
left/
right
from
each speaker
•
LED
orange
only:
left
from
primary
speaker.right
from
secondary speaker
•
LED
off:
TWS
off
~To
clear all devices
from
TWS memory and return
to
single device operation, press and hold the TWS button
for
[1
D)
seconds until third beep is heard and the TWS
LED
double blinks, then
tum
the
unit off. Wheri unit is
turned
on
again, the TWS
LED
will
not
be
on.
indicating
that
TWS is disabled.
~
If
you
experience any difficulty with either standard
Bluetooth pairing
or
TWS operation. the VG3 Bluetooth
system can be
reset
by
clearing pairing memory of both
Bluetooth and TWS
by
using the
[1
0)
second press and
hold function (third beep) of each button and then power
cycling the unit.
~
No music
or
intermittent
dropouts? VG3 primary and
secondary units may
be
too
far
away
from
each other.
Handsfree Speakerphone Operation
1.
Ifyour phone receives a call while paired with the VG3
press the
play/
pause button
to
answerthe call. VG3 will
become a hands-free speaker phone
2.
When
call is complete, press the Play/Pause button
to
end the call. VG3 will automatically
return
to
your previous
music source
~
If Keypad Auto-Lock
or
Child Lock is active when call is
received,
the
keypad will automatically unlock
for
duration
of call and re-engage
after
call completes.
Qualcomm TrueWireless™
is
a product of Qualcomm Technologies
International, Ltd.
