Soundbrenner Pulse Manuel utilisateur
IN THE BOX
Charging Station Charging Cable
Soundbrenner Pulse
Short BandLong Band
2ENGLISH
CHARGING THE BATTERY
Charging
Fully Charged
While charging, the
logo will slowly pulse
in an orange color.
When charging is
complete, the logo will
turn solid green.
The Soundbrenner Pulse comes with a magnetic charging
station that uses a standard Micro USB cable. You can plug
it into any computer USB port or use a USB wall adapter,
including those that ship with a smartphone or tablet.
After you take the Soundbrenner Pulse out of the box,
charge it for at least 30 minutes. A full charge can take up
to 2.5 hours.
On average, a full charge will get you up to 6 hours of use.
NOTE
3ENGLISH
GET THE APPS
System Requirements
For even more power and customization, you can download
Soundbrenner’s native mobile companion apps. Search for
“Soundbrenner” in the iOS App Store or the Google Play
Store, or visit www.soundbrenner.com/start and follow the
links to the correct download for your device.
We’ve also created Soundbrenner DAW Tools
for Mac OS X. It works with every major DAW
suite – including Avid Pro Tools, Ableton Live,
and Logic Pro X – and lets you synchronize
tempo between the Soundbrenner Pulse and
your favorite DAW.
To get started with Soundbrenner DAW Tools,
visit soundbrenner.com/dawtools.
Devices
iPhone 4S / iPod touch 5 / iPad 3 and later
Most modern Android phones and tablets
Operating Systems
iOS 8.4 and later
Android 4.3 and later
Devices
Any Mac desktop or notebook with Bluetooth 4.0
Operating Systems
OS X 10.10 Yosemite and later
Go
www.soundbrenner.com/start
4ENGLISH
HOW TO INSTALL THE BANDS
3
2
3
1Find the gap around the edge of
the Soundbrenner Pulse
Insert one side of the Soundbrenner
Pulse into the band
Using your other hand, pull up on
the opposite side of the band until it
snaps into place
SEE IT ON VIDEO
SNBR.IO/U11
Make sure you grasp the Soundbrenner Pulse and
band firmly. You may need to use your thumb to help
it seat in the band completely.
NOTE
5ENGLISH
WHERE TO WEAR IT
Depending on you and the instrument that you play, where
you place the Soundbrenner Pulse on your body can have a
big impact on your experience.
For your first few sessions, try out both of the included
bands and move the Soundbrenner Pulse to dierent
locations to see which feels best. Remember to keep the
strap tight – the tighter the strap, the stronger the vibrations.
The hooks on the long
band allow you to easily
slide it over your arm.
Try to wear the
Soundbrenner
Pulse on a part
of your body that
you don’t move
too much while
playing.
TIP
6ENGLISH
FEELING THE BEAT
Using a vibrational metronome is much dierent from using
a normal click.
When you first start using the Soundbrenner Pulse, it’s
almost like learning to keep the beat from scratch. Don’t
give up – you’ll get better over time, just like learning to
practice with a traditional metronome.
The biggest dierence comes in how you perceive each
beat. Some people react dierently to vibrations than they
do to an audible click; over time, the vibration can even
become a subconscious feeling that helps you keep the
beat without thinking about it.
The length and intensity of the vibrations make a big
dierence.
The Soundbrenner Pulse supports nine dierent haptic
profiles – you can choose from one of three vibration
intensities for short, medium, and long duration beats.
Since everyone feels vibrations in their own way, it’s
important that you choose vibration styles that work for
you. Once you’ve set up your Soundbrenner Pulse, visit
the Haptics section of the Settings menu for your unit to
experiment with dierent vibrations.
SEE IT ON VIDEO
SNBR.IO/U12
Don’t give up – you’ll get better over
time, just like learning to practice
with a traditional metronome.
Once you’ve set up your
Soundbrenner Pulse, visit the Haptics
section of the Settings menu for your
unit to experiment with dierent
vibrations.
TIP
TIP
7ENGLISH
TURN IT ON AND OFF
2
To turn the Soundbrenner Pulse on or o, first twist the ring
at least 1/4 turn – in either direction – and then touch the
face with two fingers for two seconds.
TWIST TOUCH
When the Soundbrenner Pulse starts up, it will glow white
and vibrate strongly for around half a second. The logo will
stay lit until you turn the unit o.
During shutdown, the Soundbrenner Pulse will glow white
briefly. Once it is no longer glowing, it is o.
SEE IT ON VIDEO
SNBR.IO/U13
Make sure to turn your Soundbrenner
Pulse o – using the same procedure
– after you’re finished playing.
TIP
8ENGLISH
INTERACTIONS
Twist the wheel counterclockwise to decrease
the BPM or clockwise to increase the BPM.
Tap 2x Tap 3x
Twist
Play and Pause BPM Tap
BPM Wheel
Using two fingers,
tap twice in quick
succession to play or
pause the metronome.
Using two fingers, tap the
face at least three times
in succession. The device
will match the average
tempo of your taps.
SEE IT ON VIDEO
SNBR.IO/U14
Be sure to use two fingers when you
tap, and to place them flat on the
surface. Don’t use just your fingertips.
TIP
9ENGLISH
STATUS ALERTS
To reconnect the Soundbrenner Pulse to your device, open
the Soundbrenner app, tap on Settings, and then tap
on the name of the disconnected Soundbrenner Pulse in
the menu.
SEE IT ON VIDEO
SNBR.IO/U15
Low Battery
Lost Connection
When the battery falls
below 20 percent, the
Soundbrenner Pulse
will vibrate and flash
red three times.
When the Soundbrenner
Pulse loses its connection
to your device, it will
automatically enter
discovery mode – this
is signified by a pulsing
blue glow.
A full charge can take up to 2.5 hours. On average, a full
charge will get you up to 6 hours of use.
You can exit discovery mode without reconnecting – simply
tap once on the touch surface.
NOTE
NOTE
10 ENGLISH
MULTILINK
You can connect up to five Soundbrenner Pulse units to a
single smartphone or tablet, letting your entire band – or
even just your music teacher – feel the beat together.
Once you’ve connected your own Soundbrenner Pulse to
your mobile device, adding more is easy.
SEE IT ON VIDEO
SNBR.IO/U16
When you press Play in the metronome screen, every
connected Soundbrenner Pulse will begin to vibrate in sync.
It’s important to note that things like vibration and light
settings are set on a per-unit basis: you’ll all feel the same
rhythm, but you can customize the rest to your body.
If you need to disconnect a Soundbrenner Pulse from your
mobile device, the process is just as simple.
iOS: Just open the app, tap on the Settings tab,
and then tap “Add another Soundbrenner Pulse.”
iOS: In the Settings tab, find the device you
want to disconnect, and swipe to the left – a
“Disconnect” button will appear.
Android: Just launch the app, open the navigation
drawer, and then tap “Add a Device.”
Android: Inthe navigation drawer, and then tap on
the device you want to disconnect – a “Disconnect”
button will appear.
Autres manuels pour Pulse
1
Table des matières
Autres manuels Soundbrenner Montre
