Sony ICD-TX800 Manuel utilisateur

Autres manuels pour ICD-TX800

Table des matières

Autres manuels Sony Enregistreur vocal

Sony

Sony ICD-TX660 Guide de référence

Sony

Sony RDR-VX535 - DVD Recorder & VCR Combo Player Manuel utilisateur

Sony

Sony ICD-PX333F Manuel utilisateur

Sony

Sony Handycam HDR-CX440 Mode d'emploi

Sony

Sony ICD-PX333F Guide de référence

Sony

Sony ICD-P620 Manuel utilisateur

Sony

Sony ICD-UX512F Manuel utilisateur

Sony

Sony ICD-V21 - Icd Recorder Manuel utilisateur

Sony

Sony ICD-PX240 Manuel utilisateur

Sony

Sony HSR-1 Manuel utilisateur

Sony

Sony ICD-P630F Manuel utilisateur

Sony

Sony ICD-PX470 Manuel utilisateur

Sony

Sony ICD-BX132 Manuel utilisateur

Sony

Sony ICD-B300 Manuel utilisateur

Sony

Sony DSR-2000A Manuel utilisateur

Sony

Sony ICD-B10 - Ic Recorder Manuel utilisateur

Sony

Sony ICD-BP100 - Ic Recorder Manuel utilisateur

Sony

Sony TCM 150 - Cassette Recorder Manuel utilisateur

Sony

Sony ICD-35 - Ic Recorder Manuel utilisateur

Sony

Sony ICD-B200 Manuel utilisateur

Sony

Sony ICD-80 - Ic Recorder Manuel utilisateur

Sony

Sony ICD-PX720 Manuel utilisateur

Sony

Sony ICD-B16 Manuel utilisateur

Sony

Sony ICD-SX712 Manuel utilisateur

Manuels Enregistreur vocal populaires d'autres marques

RCA

RCA VR5230 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Guide de l'utilisateur

LogTag

LogTag TREL30-16 Manuel utilisateur

SVAT

SVAT CVP800 Manuel utilisateur

Marantz

Marantz PMD620 Manuel utilisateur

Zoom

Zoom H4next Manuel utilisateur

Roland

Roland BR-900CD Manuel utilisateur

JVC

JVC ProHD GY-HMZ1U Manuel d'utilisation et d'entretien

Panasonic

Panasonic PQT8531-P Manuel utilisateur

Sanyo

Sanyo TRC-6400 Manuel utilisateur

Tascam

Tascam DR-07 Manuel utilisateur

Olympus

Olympus DW-90 Manuel utilisateur

Sanyo

Sanyo ICR-B150 Manuel utilisateur

Korg

Korg D4 Manuel utilisateur

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Instructions de montage

Philips

Philips VOICE TRACER VTR5810 Manuel utilisateur

DVS

DVS Pronto2K Instructions d'installation

BOOCOSA

BOOCOSA VR-001 Manuel utilisateur

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

IC Recorder

ICD-TX800

Operating Instructions

4-699-321-41(1)

ICD-TX800 4-699-321-41(1)

Owner’s Record

The model number is located at the front panel and the

serial number is located at the side panel. Record these

numbers in the space provided below. Refer to these

numbers whenever you call upon your Sony dealer

regarding this product.

Model No. _________________________________

Serial No. __________________________________

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Refer to the Help Guide

This is the Operating Instructions, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t80/h_uc/

Check the supplied items

• IC Recorder (1)

• Remote control* (1)

• Stereo headphones (1)

• Dedicated headphone cable (1)

• USB cable (1)

• Carrying case (1)

• Operating Instructions (this sheet)

• Warranty card

• Application Software, Sound Organizer 2 (Installer file

stored in the built-in memory so that you can install it to

your computer.)

* A button type lithium battery is already installed.

Parts and controls

IC recorder Remote control















































  

Your IC recorder has a built-in

clip on its back.

You can hook it onto

something, such as the hem

of a pocket.

Built-in microphones

Operation indicator

Display window

Bluetooth indicator*¹

USB connector cover

USB/Headphone connector (inside the USB connector

cover)

  STOP button

HOLD•POWER switch*²

  REC button

  /DPC (Digital Pitch Control) button

Built-in antenna*³

  STOP button

Operation indicator

HOLD switch

  (review/fast backward) button

 BACK/ HOME button*⁴

  (play/enter) button*⁵

  REC button

  (cue/fast forward) button

OPTION button

  /A-B (repeat A-B) button

VOL –/+ (volume –/+) button*⁵

T-MARK (track mark) button

RESET button*⁶

Strap hole (No strap is supplied with your IC recorder.)

Battery case*⁷

*¹ The indicator changes in color or flashes to indicate the status of the

Bluetooth function or the Bluetooth pairing (device registration).

*² Sliding the HOLD•POWER switch to “POWER” and holding it for 8

seconds or longer restarts your IC recorder. Before restarting the

IC recorder, make sure the operating indicator is unlit. For detailed

instructions, refer to the Help Guide.

*³ When using the remote control, do not cover the built-in antenna, for

example with your hand, so as not to disturb the wireless connection

with the IC recorder.

*⁴ Press this button once to display the previous screen. Press and hold it

to display the HOME menu screen.

*⁵ There is a tactile dot on the (play/enter) button and next to “+” on

the VOL –/+ (volume –/+) button.

*⁶ Press this button when the remote control seems not working.

*⁷ A button type lithium battery is already installed.

¼Your IC recorder is not equipped with built-in speakers.

Let’s try out your new IC recorder

Charge

Charge the IC recorder.

Using the supplied USB cable, connect the USB/

Headphone connector inside the USB connector cover to

a USB port of a running computer. Charging starts.

When the battery is fully charged, the battery indicator

will indicate “ .”

Disconnect the IC recorder.

Make sure that the message “Accessing” is no longer

on the display window. Then refer to the Help Guide to

remove the IC recorder safely.

Power on

IC recorder

Slide and hold the HOLD•POWER switch on the IC recorder

in the direction toward “POWER” until the window display

appears.

To power off, slide the HOLD•POWER switch on the IC

recorder to “POWER” and hold it until “Power Off” appears on

the display window.

Remote control

Operation indicator

Slide the HOLD switch away from “HOLD.”

To power on the remote control, press any one of the buttons

on the remote control. When the operation indicator on the

remote control stops flashing, operations with the remote

control are available.

The remote control is not equipped with the power button.

It automatically powers off in the following cases:

• if the wireless connection is not established with the IC

recorder and you leave the remote control unused for about

5 minutes

• if the wireless connection is established with the IC recorder

and

– you power off the IC recorder

– you leave the remote control unused for about 2 hours

To use the remote control for operations after it powers off,

follow the above procedure to power on the remote control,

and then press your desired button on the remote control

once again.

To prevent unintentional operations (HOLD)

The IC recorder and the remote control are each equipped

with the switch to hold the operation.

Slide the HOLD•POWER switch on the IC recorder or the HOLD

switch on the remote control in the direction of “HOLD.”

IC recorder Remote control

¼To release the IC recorder or the remote control from the Hold

status, slide the HOLD•POWER switch towards the center or the

HOLD switch away from “HOLD,” respectively.

Initial settings

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

When you power on your IC recorder for the first time, the

“Configure Initial Settings” screen appears on the display

window of the IC recorder. Use the remote control to make

initial settings, such as selecting the display language, setting

the clock, and turning on/off the beep sound.

Slide the HOLD switch away from “HOLD” to release

the remote control from the HOLD status.

Remove the yellow label from the back of the remote

control when you use it for the first time.

When “Configure Initial Settings” screen appears,

press any button on the remote control.

If the operation indicator on the remote control is

flashing, wait until it stops flashing before proceeding to

the next step.

Press to start the initial settings.

Select the display language.

You can select from the following languages:

English*, Español (Spanish), Français (French)

* Default setting

Set the current year, month, day, hour, and minute.

¼To go back to the previous clock setting item, press BACK/

HOME.

Select “Next.”

Select “Yes” or “No” to turn on or off the beep sound.

When the initial settings finish, the completion message

and then the HOME menu screen appears.

Notes

• You can hear the beep sound only through the headphones

connected to your IC recorder.

• You can change any of the initial settings at any time later. For

detailed instructions, refer to the Help Guide.

Using the HOME menu

You can use the HOME menu for a variety of operations,

including locating and playing a recorded file and changing

the settings of your IC recorder.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

BACK/HOME

¼To use the HOME menu, you need to operate the remote

control.

Press and hold BACK/HOME.

The HOME menu screen appears on the display window

of the IC recorder.

The HOME menu items are aligned in the following

sequence.

Recorded

Files

Record SettingsREC

Remote

Back

to XX*

Music

Select your desired function from the following:

Music You can select and play one of the files

you have imported from a computer.

To locate a music file, select “All Songs,”

“Albums,” “Artists,” or “Folders.”

When importing files, be sure to import

them into the MUSIC folder.

Recorded

Files

You can select and play one of the

files you have recorded with your IC

recorder. To locate a recorded file,

select “Latest Recording,” “Search by

REC Date,” “Search by REC Scene,” or

“Folders.”

Record You can display the record standby

screen, and then start recording.

REC Remote You can display the menu screen for

REC Remote that uses the Bluetooth

function.

Additionally, you can turn on/off the

Bluetooth function or make device

registration (pairing) for using REC

Remote.

Settings You can display the Settings menu

screen and change various settings on

the IC recorder.

Back to XX* You can go back to the screen that

was displayed before the HOME menu

screen.

* The function you are currently using is displayed in “XX.”

¼Press STOP to return to the screen displayed before you

entered the HOME menu.

Using the OPTION menu

You can use the OPTION menu to perform a variety of

functions, including changing the settings of your IC

recorder.

The available items differ depending on the situation.

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select (/)

Enter

OPTION

¼To use the OPTION menu, you need to operate the remote

control.

Select your desired function from the HOME menu,

and then press OPTION.

Select the menu item for which you want to

change the setting.

Select your desired setting option.

Copying files from your

ICrecorder to a computer

You can copy the files and folders from your IC recorder to a

computer to store them.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Drag and drop the files or folders you want to

copy from “IC RECORDER” to the local disk on the

computer.

Disconnect your IC recorder from the computer.

Installing Sound Organizer 2

Install Sound Organizer on your computer.

Sound Organizer allows you to exchange files between your

IC recorder and your computer.

Songs imported from music CDs and other media, MP3 and

other audio files imported to a computer can also be played

and transferred to the IC recorder.

Notes

• Sound Organizer is compatible with Windows computers only.

Itis not compatible with Mac.

• This IC recorder is compatible with Sound Organizer 2 only.

• If you format the built-in memory, all data stored there will be

deleted. (The Sound Organizer software installer will also be

deleted.)

• When installing Sound Organizer, log in to an account with

administrator privileges.

• The installation procedure varies depending on the Windows

version. The following procedure uses Windows 7 as an

example.

Follow the instructions in “Charge” to connect your

IC recorder to a computer.

Make sure the IC recorder is successfully detected

by the computer.

“Connecting” appears and stays on the IC recorder's

display window while the IC recorder is connected to

the computer.

Go to the [Start] menu, click [Computer], and then

double-click [IC RECORDER] - [FOR WINDOWS].

Double-click [SoundOrganizer_V2001] (or

[SoundOrganizer_V2001.exe]).

Follow the computer's on-screen instructions.

Make sure that you accept the terms of the license

agreement, select [I accept the terms in the license

agreement], and then click [Next].

When the [Setup Type] window appears, select

[Standard] or [Custom], and then click [Next].

Follow the instructions on the screen and set the

installation settings when you select [Custom].

When the [Ready to Install the Program] window

appears, click [Install].

The installation starts.

When the [Sound Organizer has been installed

successfully.] window appears, check [Launch

Sound Organizer Now], and then click [Finish].

Note

You may need to restart your computer after installing

Sound Organizer.

Replacing the battery of the

remote control

When the indicator on the remote control lights in red,

the battery is running out of power. Follow these steps to

replace the battery. Be sure to use the button type lithium

battery, CR2032, for replacement.

 





Turn over the remote control to face it down.

Record

Buttons to use (on the IC recorder)

Built-in microphones

STOP

REC

Operation indicator

• To start recording, you can operate either the IC recorder or the

remote control.

• Before you start recording, make sure that the HOLD status is

released.

• You can select a operation scene for each situation by selecting

“Scene Select” in the OPTION menu with the remote control.

Turn the IC recorder so that its built-in microphones

point in the direction of the recording source.

Press REC.

Make sure that the operation indicator on the IC recorder

lights in red, indicating that recording has started.

Press STOP to stop recording.

Recording stops and “Saving...” appears on the display

window.

Listen

Your IC recorder is not equipped with a built-in speaker. For

audio listening, you need to connect the stereo headphones

(supplied) to the IC recorder with the dedicated headphone

cable (supplied). For playback operations, use the remote

control.

Listening preparation

Connect the stereo headphones to the USB/Headphone

connector on the IC recorder with the dedicated headphone

cable.

To start playback

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

STOP

BACK/HOME

VOL –/+ button

While watching the display window on the IC

recorder, operate the remote control to select

“ Recorded Files” from the HOME menu.

Select “Latest Recording,” “Search by REC Date,”

“Search by REC Scene,” or “Folders.”

Select your desired file.

Playback starts.

Press VOL + or VOL - to adjust the volume.

Press STOP to stop playback.

¼Right after you stopped recording, you can press to play the

file you have just recorded.

To add a track mark

You can add a track mark at a point at which you want to

divide a file later or locate during playback. You can add a

maximum of 98 track marks to each file.

You can also add track marks during recording.

Delete

Buttons to use (on the remote control)

Display window (on the IC recorder)

Enter

OPTION

Select

(///)

¼To delete a file, you need to operate the remote control.

Note

Once a file is deleted, you cannot restore it.

While watching the display window on the IC

recorder, operate the remote control to select the file

you want to delete from the list of recorded files or

play back the file you want to delete.

Select “Delete a File” from the OPTION menu.

“Delete?” appears and the selected file starts playing for

your confirmation.

Select “Yes.”

“Please Wait” appears and stays until the selected file is

deleted.

Push and hold the tab () toward the groove (),

insert your fingernail into the groove (), and

then pull out the battery case.

Remove the battery.

Place the new battery with the + side facing up.

Insert the battery case back into the remote

control.

Press the RESET button on the back of the remote

control.

Press any button on the remote control (the

operation indicator on the remote control flashes

alternately in blue and red) to power it on, and

then power on the IC recorder.

When the operation indicator on the remote control

stops flashing, operations with the remote control are

available.

Precautions

On power

• IC Recorder

DC 3.7V : the built-in rechargeable lithium-ion battery

DC 5.0V : when charged using USB

Rated current consumption : 500mA

• Remote Control

DC 3V : CR2032 (Button type lithium battery)

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

• Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

• Should any solid object or liquid fall into the unit, remove

the battery and have the unit checked by qualified

personnel before operating it any further.

• When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

• Be careful not to allow water to splash on the unit. The

unit is not waterproof. In particular, be careful in the

following situations.

– When you have the unit in your pocket and go to the

bathroom, etc.

When you bend down, the unit may drop into the water

and may get wet.

– When you use the unit in an environment where the unit

is exposed to rain, snow, or humidity.

– In circumstances where you get sweaty. If you touch the

unit with wet hands or if you put the unit in the pocket

of sweaty clothes, the unit may get wet.

• Listening with this unit at high volume may affect your

hearing.

• For traffic safety, do not use this unit while driving or

cycling.

• Do not use this unit at a place where the inability to hear

surrounding sounds may present a danger.

• You may feel pain in your ears if you use the headphones

when the ambient air is very dry.

This is not because of a malfunction of the headphones,

but because of static electricity accumulated in your body.

You can reduce static electricity by wearing non-synthetic

clothes that prevent the emergence of static electricity.

On noise

• Noise may be heard when the unit is placed near an AC

power source, a fluorescent lamp or a mobile phone

during recording or playback.

• Noise may be recorded when an object, such as your

finger, etc., rubs or scratches the unit during recording.

On maintenance

To clean the exterior, use a soft cloth slightly moistened in

water. Then use a soft dry cloth to wipe the exterior. Do not

use alcohol, benzine or thinner.

If you have any questions or problems concerning your unit,

please consult your nearest Sony dealer.

Notes on the Bluetooth function

• Bluetooth wireless technology allows connection at a

distance of up to about 10 m (33 feet). However, the

effective range may vary depending on obstructions

(people, metals, walls, etc.) or signal status.

• Because Bluetooth and wireless LAN (IEEE802.11b/g)

devices use the same frequency (2.4 GHz), signal

interference may occur, resulting in communication

speed decrease, noise, or inability to connect, if Bluetooth

communications are used near a wireless LAN device. In

such cases, take the following measures.

– Perform Bluetooth communications at least 10 m (33 feet)

away from the wireless LAN device when connecting

your IC recorder and a Bluetooth device.

– Place your IC recorder and the Bluetooth device as close

together as possible.

– Turn off the wireless LAN device when performing

Bluetooth communications within about 10 m (33 feet) of

a wireless LAN device.

• Radio waves emitted from a Bluetooth device may affect

the operation of equipment such as electronic medical

devices. Turn off your IC recorder and other Bluetooth

devices in the following locations as failure to do so may

cause an accident.

– In hospitals, near priority seats on trains, in airplanes, in

places such as gasoline stations where flammable gases

are present, near automatic doors or fire alarms.

• If the operation indicator on the remote control keeps

flashing and the remote control seems not working, you

may be able to solve this by having your IC recorder and

the remote control registered with each other once again.

For detailed instructions on the device registration, refer to

the Help Guide.

WARNING

• Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

• Do not dismantle, open or shred secondary cells or batteries.

• Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

• In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

• Secondary cells and batteries need to be charged before

use. Always refer to the manufacturer’s instructions or

equipment manual for proper charging instructions.

• After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

• Dispose of properly.

• Do not ingest battery, Chemical Burn Hazard. The remote

control supplied with this product contains a coin/button

cell battery. If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2 hours and can

lead to death.

Keep new and used batteries away from children. If the

battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Notes on the operations

• When the button operations of the remote control do not

work, check if:

– the IC recorder is powered.

By default, the IC recorder will automatically power off

if you leave it unused for 30 minutes.

– the remote control is released from the HOLD status.

– the wireless connection process with the IC recorder is

in progress.

The operation indicator on the remote control flashes

while the wireless connection is being established.

• You can check the indication of the operation indicator

on the remote control for the status of the remote

control.

Indication of the

operation indicator

Status of the remote

control

Flashes twice in blue*.

Powered on.

Lights in blue for 2

seconds.

Powered off.

Flashes four times in blue*.

Resetting of the remote

control is complete.

Stays lit in red. Not operable due to

battery shortage.

Flashes alternately in blue

and red.

Device registration process

is in progress.

Flashes twice in blue*

repeatedly.

Wireless connection

process is in progress.

Flashes once in blue*. Wireless connection is

established and button

operations are available.

* When the battery is running out of power, the operation indicator on

the remote control lights in red.

Operations with the

smartphone (REC Remote)

Buttons to use (on the remote control)

Display window (on the IC recorder)

Select

(///)

Enter

With the BLUETOOTH® function of your IC recorder, you can

operate your IC recorder (recording, changing the recording

settings, etc.) using a smartphone.

To operate your IC recorder using a smartphone

You need to install REC Remote on the smartphone and make

a pairing between the smartphone and your IC recorder.

Pairing means having Bluetooth devices registered with each

other to establish a wireless connection for the first time.

To make a pairing with the IC recorder using REC Remote, you

need the latest version of REC Remote. If your smartphone

has REC Remote already installed, be sure to upgrade it to the

latest version.

Search Google Play or App Store for REC Remote and

install it on the smartphone.

On the IC recorder, select “REC Remote”- “Add Device

(Pairing)” from the HOME menu with the remote

control and follow the on-screen instruction to turn

on the Bluetooth function.

On the smartphone, start REC Remote and select

“ICD-TX800” (your IC recorder) from the available

device list. For detailed instructions, refer to the help

of REC Remote and the manual supplied with the

smartphone.

Now you can use the smartphone for IC recorder

operations.

Note

The device registration (pairing) information is cleared in the

following cases. You need to pair the devices once again.

- The settings on the IC recorder, the smartphone, or both devices

are reset to the default settings, for example, due to initialization.

- The device registration (pairing) information is deleted, for

example, during the course of a repair service.

To turn on or off the Bluetooth function of your

IC recorder

Select “REC Remote” - “Bluetooth ON/OFF” from the

HOME menu.

To turn on the Bluetooth function, select “ON.” To

turn it off, select “OFF.”

¼Turning off the Bluetooth function conserves battery power.

For IC recorder:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low power

Wireless devices emit low levels of radio frequency energy

(RF) in the microwave range while being used. Whereas

high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce

heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not

been confirmed by additional research. The model has been

tested and found to comply with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and RSS-

102 of the IC radio frequency (RF) Exposure rules.

For Remote control:

This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines and

RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is deemed

to comply without testing of specific absorption rate (SAR).

For the customer in Canada

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

Listening for a Lifetime

Selecting fine audio equipment such as the unit you’ve just

purchased is only the start of your musical enjoyment. Now

it’s time to consider how you can maximize the fun and

excitement your equipment offers.

This manufacturer, the Consumer Electronics Association

(CEA)® and the American Speech-Language-Hearing

Association (ASHA) want you to get the most out of your

equipment by playing it at a safe level; a level that lets the

sound come through clearly without annoying blaring or

distortion and, most importantly, without damaging your

sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort

level” adapts to higher volumes of sound. So what sounds

“normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level

BEFORE your hearing adapts.

TO ESTABLISH A SAFE LEVEL:

• Set your volume control to the lowest level where you

can hear the music comfortably and clearly. Prolonged

exposure to anything over 85 decibels can cause gradual

hearing loss.

• Once you have established a sound level where you can

hear the audio comfortably, clearly and without distortion,

set the dial and leave it there.

• See if your music player has a volume limiter that allows

you to set a safe listening level by establishing a maximum

volume level on your player. This is a great solution for

parents to ensure their children listen at a safe level.

• Limit listening time to give your hearing “quiet breaks.”

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

WHEN WEARING YOUR HEADPHONES OR EARBUDS:

• Do not turn up the volume so high that you can’t hear

sounds around you.

• Do not use headphones or earbuds while operating a

motorized vehicle; it may create a traffic hazard and is

illegal in many areas.

Used wisely, your new sound equipment will provide years

of fun and enjoyment.

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer, CEA

and ASHA recommend that you avoid prolonged exposure

to excessive noise. The following list of sound levels is

included for your information so that you can better protect

your hearing.

DECIBEL LEVEL EXAMPLES:

30 Whisper

40 Quiet room

50 Moderate rainfall

60 Normal conversation

70 Busy traffic, vacuum cleaner

80 Alarm clock

CONSTANT EXPOSURE TO THESE NOISES CAN BE

DANGEROUS:

90 Lawn mower, motorcycle

100 Chain saw

110 Rock concert

120 Jet plane takeoff

130 Jackhammer

140 Firecrackers

This information courtesy of the American Speech-

Language-Hearing Association (ASHA), the national

professional, scientific and credentialing association

for more than 135,000 audiologists, speech-language

pathologists, and speech, language and hearing scientists.

For information on protection against noise-induced hearing

loss, call the ASHA Action Center (800-638-8255), Monday

through Friday, 8:30 a.m. to 5 p.m. To find an audiologist

in your area, visit www.asha.org/findpro. Parents can find

helpful information about how to protect their children’s

hearing and how to teach them about safe listening at

www.listentoyourbuds.org, an ASHA award-winning public

education campaign sponsored in part by CEA.

A safety tip from the Consumer Electronics Association, 1919

South Eads Street, Arlington, VA 22202 and the American

Speech-Language-Hearing Association, 2200 Research

Boulevard, Rockville, MD 20850.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN

CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

If you have any questions about this product, you may

call: Sony Customer Information Service Center 1-800-

222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name : SONY

Model : ICD-TX800

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 USA

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The display window turns off

automatically

The “Screen Off Timer” setting on your IC recorder is set

to “30sec” by default to save battery power. If you leave

both the IC recorder and the remote control unused for

30 seconds, the display window will turn off, but you

can still perform any button operations. To turn the

display window back on, press BACK/HOME or slide the

HOLD•POWER switch on the IC recorder to “HOLD” and

then slide it back to the original (center) position.

¼You can keep the display window from turning off or

change the default setting to another timer interval. Press

and hold BACK/HOME and select “ Settings” -

“Common Settings” - “Screen Off Timer,” and then select

“No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or

“5min.”

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.

For the state of California, USA only

Perchlorate Material -special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Specifications

Capacity (User available capacity*¹*²)

16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum recording time*³ (Built-in memory)

The maximum recording time of all the folders is as follows.

LPCM 44.1 kHz/16 bit (STEREO) 21 hours 35 minutes

MP3 192 kbps (STEREO) 159 hours

MP3 128 kbps (STEREO) 238 hours

MP3 48 kbps (MONO) 636 hours

Battery Life

• IC recorder (a built-in rechargeable lithium-ion battery)

(JEITA)*⁴

REC Mode Recording

Playback with

the headphones

Recording with

REC Remote

LPCM

44.1kHz/16bit

Approx. 12

hours

Approx. 10

hours

Approx. 6

hours

MP3 192 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 128 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

MP3 48 kbps Approx. 15

hours

Approx. 12

hours

Approx. 6

hours

• Remote control (an installed button type lithium battery)

Approx. 1 year*⁵

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*⁴

• IC recorder

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.54inches (13.7 mm)

• Remote control

Approx. 1.50 inches (38.0 mm) x 1.50 inches (38.0 mm) x

0.43inches (10.8 mm)

Mass (JEITA)*⁴

• IC recorder

Approx. 0.78 oz (22 g)

• Remote control

Approx. 0.53 oz (15 g) (including a button type lithium battery)

Temperature/Humidity

Operating temperature 41 °F - 95 °F (5°C - 35°C)

Operating humidity 25% - 75%

Storage temperature 14 °F - 113 °F (-10°C - +45°C)

Storage humidity 25% - 75%

*¹ A small amount of the built-in memory is used for file management and

therefore not available for user storage.

*² When the built-in memory is formatted with the IC recorder.

*³ Default settings for the recording scenes.

*⁴ Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

*⁵ The battery life is given only for reference purposes. It also varies

depending on factors such as usage conditions and ambient

temperatures.

Bluetooth specification

• Communication system: Bluetooth specification version 4.0

• Maximum communication range: Line of sight approx. 10m

(33 feet)*

• Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

* The range may vary depending on the communication environment.

Trademarks and licenses

• Microsoft, Windows and Windows Media are registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

• Google Play and Android are trademarks of Google Inc.

• Apple, the Apple logo, iPhone, iPod, iPod touch, iTunes,

Mac, iOS and macOS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

• “Made for iPhone” means that an electronic accessory

has been designed to connect specifically to iPod, or

iPhone, respectively, and has been certified by the

developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, or iPhone

may affect wireless performance.

• Compatible iPhone models

Bluetooth technology works with iPhone7Plus, iPhone7,

iPhoneSE, iPhone6s Plus, iPhone6s, iPhone6Plus,

iPhone6, iPhone5s, iPhone5c, iPhone5.

• The BLUETOOTH® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Sony Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders. Furthermore, “™” and “®” are not mentioned in

each in this manual.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of such

technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary.

The “Sound Organizer 2” uses software modules as shown

below:

Windows Media Format Runtime

Notes on the License

This IC recorder comes with software that are used based

on licensing agreements with the owners of that software.

Based on requests by the owners of copyright of these

software applications, we have an obligation to inform you

of the following. Please read the following sections.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.

On GNU GPL/LGPL applied software

The software that is eligible for the following GNU General

Public License (hereinafter referred to as “GPL”) or GNU

Lesser General Public License (hereinafter referred to as

“LGPL”) are included in the IC recorder.

This informs you that you have a right to have access to,

modify, and redistribute source code for these software

programs under the conditions of the supplied GPL/LGPL.

Source code is provided on the web. Use the following URL

to download it.

http://www.sony.net/Products/Linux/

We would prefer you do not contact us about the contents

of source code.

Licenses (in English) are recorded in the built-in memory

of your IC recorder. Establish a Mass Storage connection

between the IC recorder and a computer to read licenses in

the “LICENSE” folder.