Sony LF-X1 Manuel utilisateur

Operating Instructions

4-103-221-11(1)

LOCATION Free

LF-X1

LOCATION Free TV LF-X1

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB01COV-WW.fm masterpage: Right

LF-X1

4-103-221-11(1)

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeReg-

WW.fm

masterpage: Left

LF-X1

4-103-221-11(1)

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete

outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injry

from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Owner’s Record

The model and serial numbers are located at the

bottom of the base station. Record the serial number

in the space provided below. Refer to them whenever

you call upon your Sony dealer regarding this

product.

Model No. LF-X1

Serial No.____________________________

Contacting Sony

If, after reading these operating instructions, you

have additional questions related to the use of your

Sony television, please call our Customer

Information Services Center at 1-800-222-SONY

(7669) (US residents only) or 1-877-899-SONY

(7669) (Canadian residents only).

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeReg-

WW.fm

masterpage: Right

LF-X1

4-103-221-11(1)

WARNING

To reduce the risk of fire or shock hazard, do not expose

the TV to rain or moisture.

This symbol is intended to alert the user to

the presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

This equipment must not be co-located or operating in

conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement:

The available scientific evidence does not show that any

health problems are associated with using low power

wireless devices. There is no proof, however, that these

low power wireless devices are absolutely safe. Low

power Wireless devices emit low levels of radio

frequency energy (RF) in the microwave range while

being used. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that

does not produce heating effects causes no known adverse

health effects. Many studies of low level RF exposures

have not found any biological effects. Some studies have

suggested that some biological effects might occur, but

such findings have not been confirmed by additional

research. The LF-X1 has been tested and found to comply

with the Federal Communications Commission (FCC)

guidelines on radio frequency energy (RF) exposures.

The maximum SAR levels tested for the LF-X1 has been

show to be 0.87 W/kg at Body.

* This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

* When using the unit with 802.11a (5GHz), use in doors.

CAUTION

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent type.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,

and

(2)this device must accept any interference received,

including interference that may cause undesired

operation.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

ATTENTION

CAUTION

PRECAUCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB02SafeReg-

WW.fm

masterpage: Left

LF-X1

4-103-221-11(1)

NOTIFICATION

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference with radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

FCC WARNING

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

For customers in the United States

This product contains mercury. Disposal of this product

may be regulated if sold in the United States. For disposal

or recycling information, please contact your local

authorities or the Electronics Industries Alliance

(http://eiae.org).

Pour les clients résidant aux États-Unis

Ce produit contient du mercure. L’élimination de ce

produit peut être soumise à réglementation s’il est vendu

aux États-Unis. Pour obtenir des informations concernant

l’élimination ou le recyclage, veuillez contacter les

autorités locales ou l’Electronics Industries Alliance

(http://www.eiae.org).

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-

shinse\00GB03SafeRegTOC.fm

masterpage: Right

LF-X1

4-103-221-11(1)

Table of Contents

Locating the Components...................................................................................... 6

Checking the Package Contents ............................................................................ 9

Connecting a Cable or an Antenna...................................................................... 10

Connecting Video/Audio Equipment .................................................................. 10

Turning On the Power ......................................................................................... 13

Connecting to the Internet ................................................................................... 15

Configuring Network Settings............................................................................. 17

Setting Up for Mail.............................................................................................. 20

Watching TV and Video...................................................................................... 21

Basic TV/Video Screen ....................................................................................... 22

Viewing Web Pages............................................................................................. 23

Basic Internet Screen........................................................................................... 24

Using E-mail........................................................................................................ 25

Basic E-mail Screen............................................................................................. 25

Viewing Enlarged Images ................................................................................... 28

Basic Digital Photo Album Screen...................................................................... 29

Specifications....................................................................................................... 30

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeReg-

WW.fm

masterpage: Left

LF-X1

4-103-221-11(1)

Locating the Components

Monitor

1LCD (Liquid Crystal Display)

2POWER indicator

Lights green when the power is on.

3WIRELESS indicator

Indicates the status of wireless communications.

Lights blue: Communications using the 5 GHz

channel are in progress.

Lights green: Communications using the 2.4 GHz

channel are in progress.

Off: No radio waves are being output.

4“Memory Stick” indicator

Lights orange while the unit and the inserted

“Memory Stick” are communicating.

5“Memory Stick” slot

Insert a “Memory Stick.”

6USB connector

Connect a commercially available keyboard.

7LAN connector

Connect a LAN cable.

8Speakers

9Mail Auto Receive indicator

Lights red when new e-mail is received through

periodical e-mail check.

0e Charge indicator

Indicates the status of charging.

Lights red: Charging the battery is in progress.

Off: Charging finished.

qa Infrared receiver

qsiHeadphones jack (stereo minijack)

qdAV IN connector

Right side

Left side

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeReg-

WW.fm

masterpage: Right

LF-X1

4-103-221-11(1)

Locating the Components

qfStylus pen compartment

qgPOWER switch

Turns on and off the power to the monitor.

qhVOLUME +/– buttons

Adjusts the volume of the speakers.

qjCAPTURE button

Saves the currently displayed screen in an

album as a still image.

qkINDEX button

Displays the Index window.

qlMonitor handle

w;Monitor stand

waBattery

wsDC IN connector

Connect the AC power adaptor (supplied) for

the monitor.

Top

;

ear

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeReg-

WW.fm

masterpage: Left

LF-X1

4-103-221-11(1)

Front

Rear

Base Station

1WIRELESS indicator

Indicates the status of wireless communications.

Lights blue: Communications using the 5 GHz channel are

in progress.

Lights green:Communications using the 2.4 GHz channel

are in progress.

2LINE indicator

Indicates the connection status to an external network such

as the Internet.

Blinks green: Connection is being made.

Lights green: Connection has been made.

Off: Connection has not been made.

3NetAV indicator

Indicates the connection status when connection with the

monitor has been made using the NetAV function.

Lights green: Connection to the NetAV has been made.

Off: Connection to the NetAV has not been made.

4POWER indicator

Lights green when the power to the base station is on.

5POWER switch

Turns on and off the power to the base station.

6LAN connector

Connect a LAN cable.

7USB connector

8VHF/UHF connector

Connect an antenna connection cable.

9VIDEO LINE OUTPUT (AUDIO/VIDEO) jacks

Output signals that are input to the video input 2 jack.

Connect audio and video cables.

0DC IN connector

Connect the AC power adaptor (supplied) for the base

station.

qaIR BLASTER connector

Connect the AV mouse (supplied).

qsVIDEO LINE INPUT1 (S-VIDEO/AUDIO/VIDEO) jacks

Connect S-video and audio cables; or connect audio and

video cables.

qdVIDEO LINE INPUT2 (AUDIO/VIDEO) jacks

Connect audio and video cables.

qfBASESTATION RESET button

Returns all settings including line and wireless

communications settings on the base station to the factory

defaults.

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeReg-

WW.fm

masterpage: Right

LF-X1

4-103-221-11(1)

Checking the Package Contents

After unpacking, check that all the following

items have been included:

• Base station (× 1)

• Monitor (× 1)

•Stylus(×1)

• BP-LX1A battery (× 1)

• AC-LX1B AC power adapter for the base

station (× 1)

• AC-LX1M power adaptor for the monitor (× 1)

•Powercord(×2)

•AVmouse(×1)

• Base station stand (× 1)

Checking the

Package Contents

F:\Sony\4051414_LF-X1(12inch)anki\LF-X1_anki-shinse\00GB04SafeReg-

WW.fm

masterpage: Left

LF-X1

4-103-221-11(1)

When you have connected your TV to the CATV

cable or antenna, use this hookup.

With this hookup, set Cable to OFF in the Auto

CH Program window of Settings TV/Video.

Turn off the power of your TV and remove

the antenna or CATV cable from the antenna

input of your TV.

Plug the OUT connector of the supplied

antenna connector into the antenna input of

your TV.

Plug the antenna or CATV cable removed

from your TV in step 1 into the ANT

connector of the supplied antenna connector.

Plug the output cord of the antenna

connector into the VHF/UHF connector of

the base station.

* If the output cord of the supplied antenna

connector is short, use the optional EAC-40 TV

antenna connector.

To connect the base station only to

the antenna or CATV cable directly

Use the optional EAC-315 or equivalent antenna

cable.

Use this hookup if you subscribe to a cable TV

system that uses scrambled or encoded signals

requiring a cable box to view all channels.

Connect the coaxial connector from your

cable service to the IN connector of the cable

box.

Using a coaxial cable, connect the OUT

connector of the cable box to the VHF/UHF

connector of the base station.

With this hookup, set Cable to ON in the Auto

CH Program window of Settings TV/Video.

Caution

To change channels using the cable box, set your

Wireless Home Network TV to channel from 1 to 6,

depending on the cable box channel output.

Use this hookup if you have cable TV that does

not require a cable box.

Disconnect all power sources.

Connect the CATV cable or antenna to the

VHF/UHF IN connector of the VCR.

Using a coaxial cable, connect the VHF/

UHF OUT connector of the VCR to the

VHF/UHF connector of the base station.

Connecting a Cable

or an Antenna

Connecting a TV and Cable/

Antenna

Connecting Video/

Audio Equipment

Connecting a Cable Box

Connecting a VCR and Cable/

Antenna

Table des matières

Autres manuels Sony TV

Sony

Sony BRAVIA XR 55A7 K Series Manuel utilisateur

Sony

Sony XTL-75V Manuel utilisateur

Sony

Sony WEGA KV-BZ21 Manuel utilisateur

Sony

Sony TRINITRON KV-XF29N90 Manuel utilisateur

Sony

Sony Trinitron KV-32CX10 Manuel utilisateur

Sony

Sony KDL-26S3000 - 26" LCD TV Manuel utilisateur

Sony

Sony Trinitron KV-27XBR51 Manuel utilisateur

Sony

Sony Trinitron Manuel utilisateur

Sony

Sony KV-25F3A Manuel utilisateur

Sony

Sony KD-49XE90 SERIES Manuel utilisateur

Sony

Sony WEGA KV-BZ21 Manuel utilisateur

Sony

Sony Wega KD-32DX51 AUS Manuel utilisateur

Sony

Sony TRINITRON KV-AR25M90B Manuel utilisateur

Sony

Sony KD-30XS955 Instructions: TV stand Manuel utilisateur

Sony

Sony Bravia KDL-55W790B Mode d'emploi

Sony

Sony KLV-70X300A Manuel utilisateur

Sony

Sony Bravia KDL-55W950B Manuel utilisateur

Sony

Sony KV-36FS320 - 36" Fd Trinitron Wega Manuel utilisateur

Sony

Sony KV-32XBR48 - 32" Xbr Television Manuel utilisateur

Sony

Sony Bravia KDL-32R453A Manuel utilisateur

Sony

Sony KV-1946R Manuel utilisateur

Sony

Sony TRINITRON KV-G21PD1 Manuel utilisateur

Sony

Sony KDL-40V2500 - Bravia V-series Lcd Hdtv Manuel utilisateur

Sony

Sony Trinitron KV-13TR28 Manuel utilisateur

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur