Sony CMT-F3MD Manuel utilisateur

Operating Instructions

Mini Hi-Fi

Component

System

4-229-968-11(1)

CMT-F3MD

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

This appliance is classified as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.

The following caution label is located inside the unit.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE

PRODUCT OR THE USE OF ANY PRODUCT.

US and foreign patents licensed from Dolby Laboratories.

Table of Contents

Getting Started

Step 1: Hooking up the system ................ 4

Step 2: Setting the time ............................ 5

Step 3: Presetting radio stations ............... 6

Saving the power in standby mode ........... 8

Basic Operations

Playing a CD ............................................. 9

Recording a CD on an MD

— CD-MD Synchro Recording........ 10

Playing an MD ........................................ 11

Listening to the radio

— Preset Tuning............................... 12

Recording from the radio

— Manual Recording ....................... 13

The CD Player

Playing CD tracks repeatedly

— Repeat Play.................................. 15

Playing CD tracks in random order

— Shuffle Play ................................. 15

Programming CD tracks

— Programme Play .......................... 16

Using the CD display .............................. 17

Labelling a CD — Disc Memo ............... 18

The MD Deck — Play

Playing MD tracks repeatedly

— Repeat Play.................................. 20

Playing MD tracks in random order

— Shuffle Play ................................. 21

Programming MD tracks

— Programme Play .......................... 21

Using the MD display ............................. 23

The MD Deck — Recording

Before you start recording....................... 24

Recording your favourite CD tracks

on an MD

— CD-MD Synchro Recording........ 25

Recording on an MD manually

— Manual Recording ....................... 26

Starting recording with 6 seconds of

prestored audio data

— Time Machine Recording ............ 27

Marking track numbers ........................... 29

Making a space between tracks 3 seconds

long — Smart Space ......................... 30

Adjusting the recording level .................. 32

Monaural recording ................................. 33

The MD Deck — Editing

Before you start editing........................... 34

Labelling an MD — Name Function ...... 35

Erasing recordings — Erase Function .... 37

Moving recorded tracks

— Move Function ............................ 40

Dividing recorded tracks

— Divide Function ........................... 41

Combining recorded tracks

— Combine Function ....................... 42

Undoing the last edit

— Undo Function ............................. 43

Sound Adjustment

Reinforcing the bass sound — DBFB ..... 44

Selecting the Preset Equalizer menu ....... 44

Other Features

Labelling the preset stations

— Station Name ............................... 45

Falling asleep to music

— Sleep Timer ................................. 46

Waking up to music

— Daily Timer ................................. 47

Timer recording radio programmes ........ 48

Connecting optional

components

Connecting optional A/V components .... 50

Connecting external aerials ..................... 51

Additional Information

Precautions .............................................. 51

System limitations of MDs ..................... 53

Troubleshooting ...................................... 54

Self-diagnosis Display ............................ 57

Messages ................................................. 58

Specifications .......................................... 59

Parts descriptions for the remote............. 60

Index ........................................................ 62

Getting Started

Step 1: Hooking up the system

Perform the following procedure 1to 3to hook up your system using the supplied cords and

accessories.

1Connect the speakers.

Connect the speaker cords to the SPEAKER

terminals on the unit and to the terminals on

the speakers as shown below.

Keep the speaker cords away from the aerials

to prevent noise.

2Connect the FM/AM aerials.

Set up the AM loop aerial, then connect it.

COAXIAL

AM loop aerial

Right speaker

CMT-F3MD

rear panel FM aerial Left speaker

Clear (#)

Lined (white) (3)

Insert this portion

AM loop

aerial

Extend the FM aerial

horizontally

Getting Started

3Connect the mains lead to the mains.

If the plug of the mains lead does not fit your

wall outlet, attach the supplied adaptor on to

the plug (for models with a plug adaptor).

Inserting two R6 (size AA)

batteries into the remote

Tip

With normal use, the batteries should last for about

six months. When the remote no longer operates the

system, replace both batteries with new ones.

Notes

•If you do not use the remote for a long period of

time, remove the batteries to avoid possible damage

from battery leakage.

•Be sure to insert the batteries in correct direction.

•Do not mix a new battery with an old one.

•Do not use different types of batteries together.

•Do not use a battery that is leaking.

•If the battery leaks, clean the battery compartment

and replace all the batteries with new ones.

Step 2: Setting the time

You must set the time beforehand to use the timer

functions.

CURSORT

DISP 4,6

3,5

1Turn on the system.

2Press CLOCK/TIMER SET.

The clock appears and the hour indication

flashes.

3Press .or >to set the hour.

4Press ENTER/YES or CURSORt.

The minute indication flashes.

continued

5Press .or >to set the minute.

6Press ENTER/YES.

The clock starts.

If you made a mistake

Press CURSORTor trepeatedly until the

incorrect item flashes, then set it again.

To change the preset time

You can change the preset time while the system

is off.

1Press DISP to display the clock.

2Press CLOCK/TIMER SET.

3Repeat steps 3 to 6 of “Setting the time”.

Tip

The upper dot of the colon flashes for the first 30

seconds, and the lower dot flashes for the last 30

seconds of each minute.

Step 3: Presetting radio

stations

You can preset up to 30 stations, 20 for FM and

10 for AM.

5,6

1Press TUNER/BAND repeatedly to

select “FM”or “AM”.

Pressing TUNER/BAND turns on the

system.

Step 2: Setting the time

(continued)

Getting Started

2Press TUNING MODE repeatedly until

“AUTO”appears.

3Press TUNING + or –.

The frequency indication changes and the

scanning stops when the system tunes in a

station. “TUNED”and “ST”(for a stereo

programme) light up.

If “TUNED”does not light up

and the frequency indication

does not stop changing

Press TUNING MODE repeatedly until

“AUTO”or “PRESET”disappears, then

press TUNING + or –repeatedly to tune in

the desired station.

4Press MENU/NO on the remote.

5Press .or >on the remote

repeatedly until “P.Memory ?”appears,

then press ENTER/YES on the remote.

A preset number appears in the display. The

stations are stored from preset number 1.

Preset number

6Press ENTER/YES.

“Complete !!”appears, and then the station is

stored.

7Repeat steps 1 to 6 to preset other

stations.

To stop scanning

Press TUNING MODE.

To tune in a station with a weak

signal

Press TUNING MODE repeatedly until “AUTO”

or “PRESET”disappears in step 2, then press

TUNING + or –repeatedly to tune in the station

manually.

To set another station to the

exist preset number

Start over from step 1. After step 5, press .or

>on the remote to select the preset number you

want to store the other station.

You can add a new preset number after the last

preset number.

To erase a preset station

1Press MENU/NO on the remote.

2Press .or > repeatedly until “P.Erase ?”

appears.

Select “P.All Erase ?”when you want to erase

all the preset stations.

3Press ENTER/YES on the remote.

4Press .or > repeatedly to select the

preset number you want to erase.

5Press ENTER/YES.

“Complete !!”appears.

When you erase a preset number, the preset

number decreases by one and all preset numbers

following the erased one are renumbered.

To change the AM tuning

interval

The AM tuning interval is factory-set to 9 kHz (10

kHz in some areas). To change the AM tuning

interval, tune in any AM station first, then turn off

the system. While holding down the TUNING

MODE button, turn the system back on. When

you change the interval, all the AM preset stations

are erased. To reset the interval, repeat the same

procedure.

Tips

•The preset stations are retained for about a day even

if you disconnect the mains lead or if a power

failure occurs.

•You can label the preset stations (see page 45).

Tips

•Each time you press DISP in the Power Saving

Mode, the display switches between the Power

Saving Mode and the clock display.

•?/1 indicator lights up even in the Power Saving

Mode.

Note

When the timer is set, the Power Saving Mode does

not function.

Saving the power in

standby mode

In order to conserve power, you can select

whether or not to display the clock when the

system is off. The system is set at the factory to

not display the clock when the system is off

(Power Saving Mode). To display the clock

even when the system is off, deactivate the Power

Saving Mode.

DISP

,Press DISP when the system is off.

The system switches off the Power Saving

Mode and the clock display appears.

To activate Power Saving Mode

Press DISP.

The clock display disappears.

?/1 (power)

Getting Started/Basic Operations

Basic Operations

Playing a CD

To turn on the system, press ?/1 (power).

CD indicator VOLUME

CD s

MD/CD lm/ML

FUNCTION

To Do this

Stop play Press CD s.

Pause Press CD HS. The CD HS

indicator lights orange. Press again

to resume play.

Select a track Press MD/CD lm or

ML repeatedly.

Find a point in a

track Keep pressing MD/CD lm

or ML during play and

release it at the desired point.

“—OVER—” appears at the end

of the CD.

Remove the CD Press CD A.

Adjust the

volume Turn VOLUME.

Tips

•If you turn on the system when there is a CD on the

disc tray, the CD indicator lights green.

•If there is no CD on the disc tray, “CD No Disc”

appears in the display.

•Pressing CD HS when the system is off

automatically turns on the system and starts CD

play if there is a CD on the disc tray (One Touch

Play).

•You can switch from another source to the CD

player and start playing a CD just by pressing

CD HS (Automatic Source Selection).

•You can start playing from the desired track in

step 2.

1Press MD/CD lm or ML repeatedly

until the desired track appears.

2Press CD HS.

Notes

•Do not use a CD with tape, seals or paste on it as

this may damage the CD player.

•Do not push the disc tray to close it, as this may

damage the CD player. Press CD Ato close the

disc tray.

•If you press CD Ato open or close the disc tray

while listening to another sound source, the CD

indicator lights green even if there is no CD in the

tray.

To turn off the CD indicator, press FUNCTION

repeatedly to switch the function to CD.

1Press CD Aand place a CD on the disc

tray.

?/1

(power)

To close the disc tray, press CD Aagain.

2Press CD HS.

The disc tray closes and play starts.

The CD HS indicator lights green.

Track number Playing time

With the label side up.

When you play a single CD, place it on the

inner circle of the tray.

Recording a CD on an

MD — CD-MD Synchro Recording

You can make a digital recording of a CD on an

MD, marking track numbers in the same sequence

as the original CD.

You can also record a programme of favourite

tracks (see page 25).

To turn on the system, press ?/1 (power).

4 2,3

MD indicator MD AMD s

1Insert a recordable MD.

2Press CD Aand place a CD on the disc

tray.

With the label side up.

When you play a single CD, place it on the

inner circle of the tray.

3Press CD Ato close the disc tray.

4Press CD-MD SYNC.

The MD deck stands by for recording and the

CD player pauses for play.

5Press MD HS.

Recording starts.

When the recording is completed, the CD

player and the MD deck stop automatically.

To stop recording

Press MD sor CD s.

Before inserting an MD

When the system is on, make sure the MD

indicator is off. If the MD indicator is lit green,

another MD is already inserted. Press MD Aand

remove the MD.

Tips

•If you use a partially recorded MD, recording starts

after the recorded tracks.

•The track numbers of the CD are recorded on to the

MD automatically.

•Depending on the disc, CD TEXT information may

also be recorded. If “CD-TEXT”flashes during

recording, press CHARACTER on the remote, and

then press ENTER/YES to record the title of the

current track. (If “CD-TEXT”is lit, it is

automatically recorded.)

?/1

(power)

With the arrow

pointing toward

the deck

With the label

side up, and the

shutter on the

righthand side

Table des matières

Autres manuels Sony Système stéréo

Sony

Sony MEX-XB100BT Manuel utilisateur

Sony

Sony CMT-A70 - Personal Component System Manuel utilisateur

Sony

Sony MHC-GNZ55D Manuel utilisateur

Sony

Sony CMTBX50BTi - Music Streaming Micro Hi-Fi Shelf... Manuel utilisateur

Sony

Sony LBT-XGR600 - Compact Hi-fi Stereo System Manuel utilisateur

Sony

Sony MHC-VX222 Manuel utilisateur

Sony

Sony CMT-L1 - Micro Hi Fi Component System Manuel utilisateur

Sony

Sony SRS-X2 Manuel utilisateur

Sony

Sony ZS-D10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony Giga Juke NAS-50HDE Manuel utilisateur

Sony

Sony ZS-E5 Marketing Specifications (Aqua) Manuel utilisateur

Sony

Sony HCD-RV7 Manuel utilisateur

Sony

Sony AIWA XR-MN5 Manuel utilisateur

Sony

Sony SRS-XB3 Manuel utilisateur

Sony

Sony LBT-XG60 Manuel utilisateur

Sony

Sony CMT-M90DVD - Micro Hi Fi Component System Manuel utilisateur

Sony

Sony CMT-CQ1 - Micro Hi Fi Component System Manuel utilisateur

Sony

Sony LBT-D890AV, LBT-XB55AV, LBT-XB Manuel utilisateur

Sony

Sony CMT-U1BT - Micro Hi-fi Component System Manuel utilisateur

Sony

Sony SHAKE-X70D Manuel utilisateur

Sony

Sony MHC-RX90 Manuel utilisateur

Sony

Sony Personal audio system Manuel utilisateur

Sony

Sony HTC-W555 Manuel utilisateur

Sony

Sony 2-661-374-11(4) Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur

Philips

Philips FW 690 Manuel utilisateur