Sony CMT-ED1/ED1A Manuel utilisateur
©1997 by Sony Corporation
Operating Instructions
3-860-292-14(1)
CMT-ED1/ED1A
Compact
Component
Stereo System
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This caution label is located inside the unit.
This stereo system is equipped with the Dolby* B-
type noise reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol aare
trademarks of the Dolby Laboratories Licensing
Corporation.
This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.
3
ES
F
P
Table of Contents
Getting Started
Step 1: Hooking up the system............ 4
Step 2: Setting the time ......................... 7
Step 3: Presetting radio stations .......... 8
Connecting optional AV
components .................................... 10
Basic Operations
Playing a CD ......................................... 12
Recording a CD .................................... 14
Listening to the radio........................... 15
Recording from the radio .................... 16
Playing a tape........................................ 18
The CD Player
Using the CD display........................... 19
Playing CD tracks repeatedly ............. 19
Playing CD tracks in random
order ................................................ 20
Programming CD tracks ..................... 21
The Tape Deck
Recording on a tape manually ........... 22
Recording CD by specifying the track
order ................................................ 23
Sound Adjustment
Activating the bass sound ................... 25
Activating the sound effect ................. 25
Other Features
Falling asleep to music ........................ 26
Waking up to music ............................. 26
Timer-recording radio programmes.. 28
Additional Information
Precautions ............................................ 30
Troubleshooting ................................... 31
Specifications ........................................ 33
Index....................................................... 34
4
Step 1: Hooking up the system
Follow steps 1through 5to hook up your system using the supplied cords and accessories.
Getting Started
1Remove the rear cover.
Push in on the
tabs and pull up
on the cover.
The rear cover Right speaker Left speaker
2Connect the speakers.
1Connect the speaker cords to the
SPEAKER R jack and the SPEAKER L
jack on the rear panel of the unit.
2Attach the speaker cables to the
clump.
SPEAKER
L
R
5
3Attach the speakers.
Facing the front of the unit, attach the
speaker connected to the SPEAKER R
jack onto the right side of the unit and
the speaker connected to the
SPEAKER L jack onto the left side of
the unit.
3Reinstall the rear cover.
Put the wires through the hole at the
bottom of the rear cover.
4Turn the unit upside down holding
the glass door with firm hand and
set the speaker cord into a groove of
the unit.
5Connect the mains lead to mains.
continued
Note on the glass door of CD player
The CD player cover of the CMT-ED1 is made of
tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more
weight than ordinary glass. This glass, however,
may shatter if it receives a sharp blow or if it is
scratched.
To detach the speakers
1Slide the speakers in the opposite
direction of the arrows of the
illustration in “Attach the speakers”
(see step 2-3on this page.)
2After detaching the speakers, set the
speaker cords into the speaker cord
groove at the bottom of the speaker.
Otherwise, the speaker cord could be
damaged.
Groove
6
}}
]
]
Inserting two AA (R6) batteries
into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 1: Hooking up the system
(continued)
To remove the AM aerial
If noise is heard while listening to an AM
station, remove the AM aerial from the rear
panel and place the aerial outside the cabinet.
1Remove the rear cover.
(See step 1on the page 4.)
2Remove the AM aerial.
3Attach the rear cover.
(See step 3on the page 5.)
You can hang the AM aerial on a wall.
If noise is heard while listening to an FM
station, remove the FM aerial from the rear
panel and place the aerial outside the
cabinet.
To exchange the speaker net
You can remove the speaker net drawing up
to your side and exchange with the supplied
extra net.
Tip
See wire dressing for the rear panel prior to install
the rear cover.
Hook
7
Step 2: Setting the
time
You must set the time before using the timer
functions.
4Press ENTER.
The minute indication flashes.
5Press ≠/± to set the minutes.
6Press ENTER.
The clock starts working.
Tip
If you make a mistake, start over from step 1.
1Press TIMER SET.
The clock of the display begins flashes.
When “DAILY” or “TIMER REC”
appears, press ≠/± repeatedly so
that it disappears.
2Press ENTER.
The hour indication flashes.
1
2,4,6
3,5
1/u
(Power)
3Press ≠/± to set the hour.
The clock uses the 24 -hour system.
8
Step 3: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
1Press FUNCTION repeatedly to
select “FM” or “AM.”
2Press FM or AM (or TUNER/BAND
on the remote repeatedly).
3Press TUNING/PLAY MODE on
the remote repeatedly until
“AUTO” appears.
4Press TUNING +/– (or ≠/±
on the remote).
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “ST” (for a
stereo programme) appears.
5Press MEMORY on the remote.
The preset channel number flashes.
6Press TUNING +/– (or ≠/±
on the remote) to select the preset
number you want.
7Press ENTER on the remote.
The station is stored.
8Repeat steps 4 through 7 to store
other stations.
2
4,6
1
4,6
3
5
7
2
1/u
(Power)
TUNED
PGM
MHz
ST
TUNED
PGM
MHz
ST
TUNED
PGM
MHz
ST
1/u
(Power)
9
To tune in a station with a weak signal
Press TUNING/PLAY MODE on the remote
repeatedly until “MANUAL” appears in step
3, then press TUNING +/– (or ≠/± on
the remote) to tune in the station.
To change the preset number
Start over from step 2.
Tip
The preset stations are retained for about two days
when you disconnect the mains lead or a power
failure occurs.
10
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting audio
components
Connecting an MD deck for digital
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
Connecting an MD deck for analog
recording
Be sure to match the colour of the plugs and
the connectors. To listen to the sound from
the connected MD deck, press FUNCTION
repeatedly until “MD” appears.
Connecting a VCR
Be sure to match the colour of the plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until “MD” appears.
To the audio
output of the
VCR
To the digital
input of the
MD deck
To the audio
input/output of
the MD deck
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Sony Système stéréo
Sony
Sony LBT-D107R Manuel utilisateur
Sony
Sony MHC-GN880 Manuel utilisateur
Sony
Sony HCD-XGV6 Manuel utilisateur
Sony
Sony HCD-H501 Manuel utilisateur
Sony
Sony HCD-GX25 - System Components Manuel utilisateur
Sony
Sony HCD-M500AV Manuel utilisateur
Sony
Sony MHC-DP1000D Manuel utilisateur
Sony
Sony MHC-GX570XM Manuel utilisateur
Sony
Sony HCD-VX3A Manuel utilisateur
Sony
Sony HCD-RG121 Manuel utilisateur
Sony
Sony MHC-V42D Manuel utilisateur
Sony
Sony HCD-G2500 Manuel utilisateur
Sony
Sony ICF-CS20BT Manuel utilisateur
Sony
Sony ALT-SA31iR Manuel utilisateur
Sony
Sony MHC-DX20 Manuel utilisateur
Sony
Sony HCD-DX2D - Dvd / Reciever Component Manuel utilisateur
Sony
Sony CFD-ZW750 - Cd Radio Cassette-corder Manuel utilisateur
Sony
Sony MHC-V50D Manuel utilisateur
Sony
Sony CMT-NEZ5 Manuel utilisateur
Sony
Sony ZS-D55 Manuel utilisateur
