Sony SS-CT100D Manuel utilisateur

SERVICE MANUAL

Ver. 1.1 2007.03

SPECIFICATIONS

9-887-256-02

2007C05-1

Sony Corporation

Home Audio Division

Published by SonyTechno Create Corporation

SPEAKER SYSTEM

•JIG

When disassembling the set, use the following jig (for

speaker removal).

Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL

SS-CT100D/WGV100D/ZX80DP/

ZX100D/ZX100DP

SS-ZX80DP SS-ZX100DP

Front Speaker SS-ZX100D

Surround Speaker SS-ZX100D

Front/Surround speaker SS-ZX100D

Speaker system 2-way, bass-reflex type,

magnetically shielded

Speaker units

Woofer 22 cm (8 5/8in.), cone type

Tweeter 5 cm (2 in.), cone type × 2

Nominal impedance 6 ohms

Dimensions (w/h/d) Approx. 308 × 365 ×

480 mm (12 1/8× 14 3/8× 18 7/8in.)

Mass Approx. 9.3 kg (20 lb 9 oz) net per

speaker

Center Speaker SS-CT100D

Speaker system Full range, 2-unit,

bass-reflex type,

magnetically shielded

Speaker units

Full range 8 cm (3 1/8in.), cone type × 2

Nominal Impedance 16 ohms

Dimensions (w/h/d) Approx. 268 × 107 ×

117 mm (10 1/2× 4 1/4× 4 5/8in.)

Mass Approx. 1.6 kg (3 lb 9 oz)

Subwoofer

SS-WGV100D

Subwoofer system 1-way, 1-unit,

bass-reflex type,

magnetically shielded

Speaker units

Subwoofer: 20 cm (7 7/8in.), cone type

Nominal impedance 8 ohms

Dimensions (w/h/d) (Approx.)

281 × 362 × 338.5 mm

(11 × 14 1/4× 13 3/8in.)

Mass (Approx.) 6.8 kg (14 lb 16 oz)

Design and specifications are subject to change

without notice.

US Model

SS-CT100D/ZX80DP/ZX100D

E Model

SS-CT100D/WGV100D/ZX80DP/

ZX100D/ZX100DP

•SS-CT100D is center speaker in FST-ZX80D/ZX100D/LBT-ZX80D/ZX100D.

•SS-WGV100D is subwoofer in FST-ZX100D/LBT-ZX100D.

•SS-ZX100D is front and surround speakers in FST-ZX80D/ZX100D/LBT-ZX80D/ZX100D.

Photo: SS-CT100D Photo: SS-WGV100D Photo: SS-ZX100D

•SS-ZX80DP is package speaker of front and surround speakers in FST-ZX80D/LBT-ZX80D.

•SS-ZX100DP is package speaker of front and surround speakers in FST-ZX100D/LBT-ZX100D.

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

Notes on chip component replacement

•Never reuse a disconnected chip component.

•Notice that the minus side of a tantalum capacitor may be

damaged by heat.

UNLEADED SOLDER

Boards requiring use of unleaded solder are printed with the lead-

free mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

•Unleaded solder melts at a temperature about 40 ˚C higher

than ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time.

Soldering irons using a temperature regulator should be set to

about 350 ˚C.

Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!

•Strong viscosity

Unleaded solder is more viscou-s (sticky, less prone to flow)

than ordinary solder so use caution not to let solder bridges

occur such as on IC pins, etc.

•Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

SECTION 1

GENERAL

This section is extracted from

instruction manual.

Subwoofer (SS-WGV100D)

SUBWOOFER ON/OFF 1

SUBWOOFER LEVEL 2

ALPHABETICAL ORDER

A – Z

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

Note: Follow the disassembly procedure in the numerical order given.

2-1. FRONT PANEL BLOCK (SS-WGV100D)

SECTION 2

DISASSEMBLY

front panel block

Insert the jig (J-2501-238-A) into a space

made by inserting the screwdriver,

and raise the front panel assy gradually.

Raise the front panel assy a little by little

from bottom to top of the set.

Insert a flat-tip screwdriver into a recess

in the bottom of the set

to raise the front panel assy a little.

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

•Note for PrintedWiring Boards and Schematic Diagrams

Note on PrintedWiring Board:

•X: parts extracted from the component side.

•Y: parts extracted from the conductor side.

•: Pattern from the side which enables seeing.

(The other layers' patterns are not indicated.)

•Indication of transistor

Note on Schematic Diagram:

•All capacitors are in µF unless otherwise noted. (p: pF)

50 WV or less are not indicated except for electrolytics

and tantalums.

•All resistors are in Ωand 1/4W or less unless otherwise

specified.

•C: panel designation.

•A: B+ Line.

•Voltages are dc with respect to ground under no-signal

conditions.

no mark : POWER ON

•Voltages aretakenwithaVOM (Inputimpedance 10 MΩ).

Voltage variations may be noted due to normal produc-

tion tolerances.

SECTION 3

DIAGRAMS

3-1. PRINTED WIRING BOARD (SS-WGV100D) : Uses unleaded solder.

R1401

R1402

R1403

R1404

Q1400

R1405

R1406

JR1402

JR1400

D1400

S1400

C1400

CN1400

SW1400

C1401

SW1400

1-868-600-

(11)

SWPANEL BOARD

SUBWOOFER

ON/OFF

SUBWOOFER

LEVEL

HCD-ZX100D

–12dB

–6dB

–3dB

0dB

1 2 3

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

3-2. SCHEMATIC DIAGRAM (SS-WGV100D)

C1400

D1400

Q1400

R1401

R1403

R1404

C1401

S1400

R1405

R1402

R1406

SW1400

JR1402

CN1400

50V

SELU5420E

2SC2712

2.2k

22k

68k

50V

6.8k

+9V

DGND

SW VOL

SW-LED

(POWER)

LED DRIVE

SUBWOOFER

LEVEL

SUBWOOFER

ON/OFF

HCD-ZX100D

-12dB

-6dB

-3dB

0dB

SS-CT100D/WGV100D/ZX100D SECTION 4

EXPLODED VIEWS

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

1A-1173-646-A OVERALL ASSY

24-874-614-21 SCREW (1) (3.5X14), TAPPING

3A-1173-647-A FRONT PANEL ASSY

SP1 1-826-375-31 LOUDSPEAKER (8cm)

SP2 1-826-375-31 LOUDSPEAKER (8cm)

4-1. SS-CT100D (CENTER SPEAKER)

•Items marked “*” are not stocked since they

are seldom required for routine service. Some

delay should be anticipated when ordering

these items.

•The mechanical parts with no reference

numberintheexplodedviewsarenotsupplied.

NOTE:

•-XX and -X mean standardized parts, so they

may have some difference from the original

one.

•Color Indication of Appearance Parts

Example:

KNOB, BALANCE (WHITE) . . . (RED)

↑↑

Parts Color Cabinet's Color

SP1

SP2

not supplied

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

4-2. SS-ZX100D (FRONT/SURROUND SPEAKER)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

51 2-663-064-01 SUB PANEL

52 A-1158-867-A FRONT PANEL ASSY

53 4-874-614-02 SCREW (1) (3.5X14), TAPPING

54 2-663-061-01 WOOFER STAND

55 2-663-063-01 SIDE PANEL L

56 2-663-062-01 SIDE PANEL R

57 2-663-078-01 FOOT B

58 2-663-077-01 FOOT A

59 4-874-614-12 SCREW (1) (3.5X14), TAPPIN

60 4-986-971-02SCREW (3.5)

61 2-669-801-01 EMBLEM, X-TRANCE

SP3 1-826-371-11 LOUDSPEAKER (5cm)

SP4 1-826-371-11 LOUDSPEAKER (5cm)

SP5 1-826-372-11 LOUDSPEAKER (20cm)

SP3 SP4

SP5

not supplied

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

4-3. SS-WGV100D (SUBWOOFER)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

101 2-660-212-11 KNOB LEVEL

102 2-660-207-31 SUB PANEL

103 2-660-211-01 BUTTON POWER

104 A-1173-623-A SWPANEL BOARD, COMPLETE

105 2-660-219-01 GRILLE

106 2-660-206-11 FRONT PANEL

107 4-874-614-02 SCREW (1) (3.5X14), TAPPING

108 4-874-614-12 SCREW (1) (3.5X14), TAPPING

SP6 1-826-378-21 LOUDSPEAKER (20cm)

#1 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3

101

SP6

not supplied

not supplied not supplied

not supplied

102

103

104

105

106 107

107

108

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

SECTION 5

ELECTRICAL PARTS LIST SWPANEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

A-1173-623-A SWPANEL BOARD, COMPLETE

*************************

< CAPACITOR >

C1400 1-124-261-00 ELECT 10uF 20% 50V

C1401 1-126-160-11 ELECT 1uF 20% 50V

< CONNECTOR >

*CN1400 1-566-779-11 PIN, CONNECTOR (PC BOARD) 4P

< LED >

D1400 6-501-228-01 LED SELU5420E-STP15 (POWER)

< JUMPER RESISTOR >

JR1400 1-216-296-11 SHORT CHIP 0

JR1402 1-216-864-11 SHORT CHIP 0

< TRANSISTOR >

Q1400 8-729-230-49 TRANSISTOR 2SC2712-YG

< RESISTOR >

R1401 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R1402 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W

R1403 1-216-837-11 METAL CHIP 22K 5% 1/10W

R1404 1-216-843-11 METAL CHIP 68K 5% 1/10W

R1405 1-216-821-11 METAL CHIP 1K 5% 1/10W

R1406 1-216-821-11 METAL CHIP 1K 5% 1/10W

< SWITCH >

S1400 1-771-410-21 SWITCH, TACTILE (SUBWOOFER ON/OFF)

SW1400 1-762-684-11 SWITCH, ROTARY (SUBWOOFER LEVEL)

NOTE:

•Due to standardization, replacements in the

parts list may be different from the parts

specified in the diagrams or the components

used on the set.

•-XX and -X mean standardized parts, so they

may have some difference from the original

one.

•RESISTORS

All resistors are in ohms.

METAL: Metal-film resistor.

METAL OXIDE: Metal oxide-film resistor.

F: nonflammable

•Items marked “*” are not stocked since they

are seldom required for routine service.

Some delay should be anticipated when

ordering these items.

•SEMICONDUCTORS

In each case, u: µ, for example:

uA... : µA... uPA... : µPA...

uPB... : µPB... uPC... : µPC...

uPD... : µPD...

•CAPACITORS

uF: µF

•COILS

uH: µH

When indicating parts by reference

number, please include the board.

SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP

REVISION HISTORY

Clicking the version allows you to jump to the revised page.

Also, clicking the version at the upper right on the revised page allows you to jump to the next revised

page.

Ver. Date Description of Revision

1.0 2006.05 New

1.1 2007.03Addition of US model (SS-CT100D/ZX80DP/ZX100D) (ENG-07001)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Système de haut-parleurs

Sony

Sony PlasmaPro PFM 42V1 Manuel utilisateur

Sony

Sony HT-ST7 Manuel utilisateur

Sony

Sony HT-MT300/B Manuel de l'opérateur

Sony

Sony HT-ST5000 Manuel utilisateur

Sony

Sony XS-HF55 - Xplod 5 1/4" Speaker Manuel utilisateur

Sony

Sony SS-MF450H Guide de démarrage rapide

Sony

Sony SRS-Z750 Manuel utilisateur

Sony

Sony SS-FCR4000 Manuel d'instructions d'installation

Sony

Sony SA-CT780 Manuel utilisateur

Sony

Sony SA-VE215 Manuel utilisateur

Sony

Sony SAV-E325 Manuel utilisateur

Sony

Sony SS-X70ED Manuel utilisateur

Sony

Sony SSU-4000 Manuel utilisateur

Sony

Sony SS-G5D Guide de configuration

Sony

Sony SS-CJ3MDS Manuel utilisateur

Sony

Sony SRS-Z500 Manuel utilisateur

Sony

Sony HT-CT770 Manuel utilisateur

Sony

Sony SA-IF70 Manuel utilisateur

Sony

Sony SRS-P11Q Manuel utilisateur

Sony

Sony SRS-A33 Manuel utilisateur

Sony

Sony SRS-Z1 Manuel utilisateur

Sony

Sony SA-VE345 Manuel d'instructions d'installation

Sony

Sony SA-VE335 Manuel utilisateur

Sony

Sony SS-SR3000 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur