Sony RM-VL600T Manuel utilisateur

2-685-367-11 (1)

Integrated Remote

Commander

RM-VL600T

Operating Instructions

Mode d’emploi

2GB

Disposal of Old Electrical & Electronic

Equipment (Applicable in the European

Union and other European countries with

separate collection systems)

This symbol on the product or on its packaging indicates that this

product shall not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed information

about recycling of this product, please contact your local Civic Office,

your household waste disposal service or the shop where you purchased

the product.

3GB

Features

The RM-VL600T Remote Commander provides centralised control of all

your AV components from a single remote commander and saves the

trouble of operating different AV components with different remote

control devices. The following are its main features.

Centralised control of Sony AV components with this one remote

commander

This Commander is preset at the factory to operate Sony brand

components, so you can use it out of the box as a control centre for your

Sony AV components.

Remote control signals for non-Sony components are also preset

This Commander is preset for most major brands components as well as

Sony. You can remote control your non-Sony components by setting the

type and code number of each component (page 10).

Learning function for programming various other remote control

signals

This Commander has a Learning function, to “learn” the remote control

signals needed to operate other non-preset components or functions. (To

“teach” such signals to this Commander, use the remote control supplied

with the non-preset components.) (page 16)

In addition, the Commander can “learn” remote control signals (infrared

signals only) of non-Audio Visual components such as air-conditioners,

lights, etc. (Some specific appliances or functions may not be available.)

(page 24)

Reassigning new components

You can assign Component Select buttons to freely operate other

components. This is useful when you have more than two of the same

kind of AV component (only if a Component Select button is free.) (page

33)

You can only assign TVs to the TV Component Select button.

You can only assign an amplifier to the AMP Component Select button.

Startup Guide

This guide shows you how to set the Remote Commander to operate

your components.

First, find the four-digit component code number for your

component, referring to the supplied “Component code numbers.”

Example: To set up a TV of

the code number “8011”

1Set the Remote

Commander for code input

mode.

2Press the desired

Component Select button.

3Enter the code number.

4Finish setting.

SET

Press SET and MENU.

SET

SATDVDTV CBL

TAPE

CDVCR AMP

ENT

Press ENT.

You can search for the

component code available for

your component.

1Set the Remote

Commander for code

input mode.

2Press the desired

Component Select button.

3Transmit code number

signals in turn.

4Finish setting.

SET

Press SET and MENU.

SET

SATDVDTV CBL

TAPE

CDVCR AMP

PROGRAM

ENT

Press ENT.

8 0 1 1

For more details, see page

Press PROGRAM + or PROGRAM

–, and then 1. Repeat until

your component reacts.

If you have the code

number

If you cannot find the

code number

For more details, see page

4GB

1Place the RM-VL600T head

to head with your VCR’s

remote control.

2Set the RM-VL600T for

“learning” mode.

Press and hold SET for at least

3 seconds until the SET

indicator flashes.

3Press the desired

Component Select button.

If your component does not work as supposed even if the code

number is set, make the RM-VL600T “learn” the functions of

your component’s remote control.

Learning function

Example: To “teach” the N(play) signal of your video cassette

recorder to the VCR Nbutton of the RM-VL600T

VCR’s remote

control

RM-VL600T

SET

VCR

4Press the button you

want to “teach.”

5Press and hold the N

(play) button of your

VCR’s remote control until

the VCR button of the

RM-VL600T lights up.

6Repeat Steps 4and 5to

“teach” other functions.

7Finish setting.

For more details, see page 16.

5 – 10 cm

(2 – 4 inches)

away (approx.)

SET

Press SET.

5GB

6GB

Table of Contents

Startup Guide ...............................................................................................4

Getting Started

Installing the Batteries ................................................................................. 8

When to replace the batteries ............................................................................ 8

Location of Controls .....................................................................................9

Basic Operations

Setting the Code for non-Sony Preset Audio and Visual Components

— Setting component codes ................................................................... 10

Setting a component code ................................................................................ 10

Checking if the code number works .............................................................. 12

Setting a Component Code by the Search Function ...................................13

Operating Your Components with the Remote Commander ...................... 14

To control the volume....................................................................................... 15

Programming Signals of Another Remote Control — Learning Function... 16

For accurate Learning ....................................................................................... 19

Programming remote control signals to the

Component Select buttons and System Control buttons ......................... 20

Changing or erasing the function of a “learned” button ............................ 22

Notes on programming the signals for an air-conditioner ......................... 24

Advanced Features

Controlling the Volume of Visual Components Connected to an Audio

System ......................................................................................................25

Adding an Extra Function to the Component Select Buttons ..................... 27

Programming the Power-On command of the selected component just

by pressing that Component Select button

(for Sony components only) ......................................................................... 27

Executing a Series of Commands — System Control Functions ................. 29

To clear programmed commands ................................................................... 31

Programming a Series of Commands on the Component Select

Buttons .....................................................................................................32

To clear programmed commands ................................................................... 33

Assigning Other Components to the Component Select Buttons ..............33

Using Other Functions

Locking the Controls — Hold Function ....................................................... 34

Erasing All Settings — To reset the Commander to its factory settings ....35

7GB

Additional Information

Precautions .................................................................................................36

Maintenance ...............................................................................................36

Specifications .............................................................................................. 36

Troubleshooting .......................................................................................... 37

Appendices

Table of Preset Functions ............................................................................ 39

TV(ANALOGUE) .............................................................................................. 39

TV(DIGITAL) ..................................................................................................... 40

VCR ..................................................................................................................... 41

CBL (Cable box) ................................................................................................. 41

SAT ...................................................................................................................... 42

SAT (No,3201) .................................................................................................... 43

DVD .................................................................................................................... 44

CD ....................................................................................................................... 45

MD....................................................................................................................... 45

DAT ..................................................................................................................... 45

DECK .................................................................................................................. 46

AMP .................................................................................................................... 46

Index ...........................................................................................................47

8GB

Getting Started

Installing the

Batteries

Slide open the battery

compartment lid and insert two

R6 (size AA) batteries (not

supplied). Be sure to match up the

+ and – indications on the

batteries with the + and –

indications on the battery

compartment.

When to replace the

batteries

Batteries for remote control

operation (two R6 (size AA)

batteries)

Under normal conditions, the

batteries will last up to six

months. If the Commander does

not operate properly, the batteries

might be drained. When this

happens, replace the batteries with

new ones.

Note

Do not take more than one hour to

replace the batteries. Otherwise, your

code number settings (page 10) and

“learned” remote control signals (page

16) will be erased.

Notes on batteries

•Do not use an old battery with a new

one, or mix different types of

batteries together.

•If the electrolyte inside the battery

should leak, wipe the contaminated

area of the battery compartment with

a cloth and replace the old batteries

with new ones. To prevent electrolyte

from leaking, remove the batteries if

you plan not to use the Commander

for a long period of time.

Insert the batteries (negative end

first) through the guide clamp

within each compartment as

shown above.

9GB

Location of Controls

1SET indicator

2SET button

3Component Select buttons

Light or flash during operation.

4Number buttons

5-button

6DIGITAL button

72(volume) +/– buttons*

8(PAP) button

9%(muting) button*

0GUIDE button

qa RETURN button

qs Player Control buttons

qd t(input select) button

qf 1(power) button

qg ENT (enter) button

qh ANALOG button

qj PROGRAM +/– buttons

qk /(Teletext) button

ql (recall) button

w; MENU button

wa Cursor Control buttons

ws TOOLS button

wd SYSTEM CONTROL buttons

SET

SATDVDTV CBL

TAPE

CDVCR

VIDEO1

VIDEO2

AUX

TUNER

TAPE

PHONO

DVD

GUIDE MENU

TOOLS

SYSTEM CONTROL

AMP

ENT

ABCD

-/--

RETURN

ANALOG

DIGITAL

PROGRAM

About tactile dots

The number 5 button, the Nbutton and PROGRAM + button each have a tactile

dot for ease of use.

*Note on the 2+/– and %buttons

The Commander controls or mutes the TV’s volume when you select a visual

component. The Commander controls or mutes the amplifier’s volume when you

select an audio component. You can change this setting (page 25).

Note

The function of the control buttons varies depending on settings/operating modes.

The “Table of Preset Functions” (page 39) shows how the Commander generally

operates for each component in the factory preset mode.

10GB

SET

SATDVDTV CBL

TAPE

CDVCR

VIDEO1

VIDEO2

AUX

TUNER

TAPE

PHONO

DVD

GUIDE MENU

TOOLS

SYSTEM CONTROL

AMP

ENT

ABCD

-/--

RETURN

ANALOG

DIGITAL

PROGRAM

1 2

2Press and while holding

SET, press MENU.

The SET indicator lights up.

Example: To set up a Philips’ TV

1See the tables in the

supplied “Component code

numbers,” and find the

four-digit component code

number for the desired

component.

If more than one code number

is listed, use the number that is

listed first.

For example, to set up a

Philips’ TV, you would use the

code number 8086.

Setting a component code

SET

Note

An MD player can be set to any of the

above Component Select buttons. You

can assign Component Select buttons to

freely set signals of your desired

components. For further information,

see “Assigning Other Components to

the Component Select Buttons” (page

33) .

For the functions of buttons as for each

component, see “Table of Preset

Functions” (page 39).

Basic Operations

Setting the Code for

non-Sony Preset

Audio and Visual

Components

— Setting

component codes

The Commander is preset at the

factory to operate Sony brand AV

components (see the table below).

If you are using the Commander

with a factory-set Sony

components, skip the following

procedures.

You can use the Commander with

other major brand preset AV

components also. To use with

other AV components, or Sony

components which do not

function with the Commander,

you need to follow the procedures

to set the correct codes for each

component.

Component

Select button

DVD

SAT

CBL

VCR

TAPE

AMP

Factory setting

Sony TV

Sony DVD

player

Sony satellite

tuner

Analogue

cable box

Sony VHS

VCR

Sony CD

player

Sony cassette

deck

Sony amplifier

Preset

component(s)

TV/VCR

Combo

DVD player

Satellite

tuner

Cable box

VCR

CD player

Cassette

deck

Amplifier

Table des matières

Langues :

Autres manuels Sony Télécommande

Sony

Sony RMF-TX300E Manuel utilisateur

Sony

Sony Remote Commander RM-V7 Manuel utilisateur

Sony

Sony RM-X55M Manuel utilisateur

Sony

Sony MKS-8080 Manuel utilisateur

Sony

Sony HomeShare RMN-U1 Manuel utilisateur

Sony

Sony RMR-TP1 - Digital Link Touch Panel Manuel utilisateur

Sony

Sony RM-X60M/L Manuel utilisateur

Sony

Sony RM-VL610 - Integrated Remote Commander Guide de l'administrateur

Sony

Sony RM-AX4000 - Integrated Remote Commander Manuel utilisateur

Sony

Sony RM-V310A Manuel utilisateur

Sony

Sony RM-V202T Manuel utilisateur

Sony

Sony RM-AX4000 - Integrated Remote Commander Manuel utilisateur

Sony

Sony RM-AX4000 - Integrated Remote Commander Guide de l'administrateur

Sony

Sony RM-VPR1 Manuel utilisateur

Sony

Sony RM-X60M - Marine Remote Commander Manuel utilisateur

Sony

Sony NHS-502 Manuel utilisateur

Sony

Sony RM-V201T Manuel utilisateur

Sony

Sony RM-V302T Manuel utilisateur

Sony

Sony RM-V14 Manuel utilisateur

Sony

Sony RM-V210 - Universal Remote Manuel utilisateur

Sony

Sony RM-V8A Manuel utilisateur

Sony

Sony RM-MC60 Manuel utilisateur

Sony

Sony RM-NX7000 Navitus Manuel utilisateur

Sony

Sony RM-VZ950T Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation