Sony PFV-L10 Manuel utilisateur
INTERFACE UNIT
PFV-L10
INSTALLATION MANUAL
2nd Edition (Revised 1)
Serial No. 17001 and Higher
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen.Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
PFV-L10
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifications of the Operation Manual.
6. When performing the installation, keep the rear of
the unit 10 cm (4 inches) or more away from walls
in order to obtain proper exhaust and radiation of
heat.
For the U.S.A.
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
1 (E)
PFV-L10
Table of Contents
Manual Structure
Purpose of this manual ......................................................................................... 3(E)
Contents ................................................................................................................ 3(E)
Related manuals.................................................................................................... 4(E)
1. Installation
1-1. Installation Procedure.............................................................................1-1(E)
1-2. Operating Environment ..........................................................................1-1(E)
1-3. Power Supply .........................................................................................1-2(E)
1-3-1. Power Supply Specifications.................................................1-2(E)
1-3-2. Recommended Power Cord...................................................1-2(E)
1-4. Installation Space ...................................................................................1-3(E)
1-5. Installing Optional Board .......................................................................1-4(E)
1-6. Rack Mounting.......................................................................................1-6(E)
1-6-1. Notes on Rack Mounting ......................................................1-6(E)
1-6-2. Rack Mounting Procedure.....................................................1-7(E)
1-7. Matching Connector...............................................................................1-8(E)
1-8. Signal Inputs/Outputs.............................................................................1-8(E)
1-9. Optional Accessories..............................................................................1-8(E)
3 (E)
PFV-L10
Purpose of this manual This manual is the installation manual of Interface Unit PFV-L10.
This manual is intended for use by trained system and service engineers, and
describes the information for installation of the unit.
Contents This manual is organized by following sections.
Section 1 Installation
1-1. Installation Procedure
This section explains the installation procedure with a flowchart.
1-2. Operating Environment
This section describes the operating environment such as operating temperature/
humidity, and mass of the unit.
1-3. Power Supply
This section describes the power supply, recommended power cord, and the
notes for power supply.
1-4. Installation Space
This section describes the dimensions of the unit.
1-5. Installing Optional Board
This section explains the installation procedure of the optional board.
1-6. Rack Mounting
This section explains the rack mounting procedure of the unit in the 19-inch
standard rack.
1-7. Matching Connector
This section describes the type of connector at the rear panel and the matching
connector.
1-8. Signal Inputs/Outputs
This section describes the connector pin assignments at the rear panel.
1-9. Optional Accessories
This section describes the optional boards and rack mount kit.
Manual Structure
4 (E) PFV-L10
Related manuals The following manuals are prepared for PFV-L10.
• Operation Manual (Supplied with PFV-L10)
This manual describes the notes on operating, the locations and functions of parts,
and controls of PFV-L10.
• Maintenance Manual (Available on request)
This manual describes the information for periodic maintenance and detailed
service.
If this manual is required, please contact your local Sony Sales Office/Service
Center.
1-1 (E)
PFV-L10
Section 1
Installation
End
Start
Determining the Location of Installation
1-2. Operating Environment
1-3. Power Supply
1-4. Installation Space
Installing the Optional Board
1-5. Installing Optional Board
1-6. Rack Mounting
Connection
Rack Mounting
1-1. Installation Procedure
The installation procedure of PFV-L10 is as shown in the
following flowchart.
Refer to the each item in this manual for details.
1-2. Operating Environment
Operating temperature 5 dC to 40 dC
Performance temperature 10 dC to 35 dC
Humidity 10 to 90 % (No condensation)
Mass: Approx. 7 kg
(Without the optional board)
To prevent overheating of PFV-L10, ensure that there is
good air circulation around the unit.
n
Install in a stable location.
Installation on unstable or tilting surface may cause the
unit fall off, resulting in injury.
PFV-L10
1-2 (E)
AC Inlet
(Main unit)
1
AC Inlet
(Main unit)
2
1-3-2. Recommended Power Cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
.Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
.Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
.Never use an injured power cord.
For customers in the U.S.A. and Canada
Required Part
1Power cord, 125 V 10 A (2.4 m) : !1-557-377-11
For customers in the United Kingdom
Required Part
2Power cord, 250 V 10 A (2.4 m) : !1-782-929-21
If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.
1-3. Power Supply
1-3-1. Power Supply Specifications
Power voltage AC 100 V to 240 V
Power frequency 50 Hz or 60 Hz
Power consumption Max. 13 A, +5 V/DC
(With the optional boards installed)
Rush current AC 120 V IN : 20 A
AC 240 V IN : 55 A
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.
1-3. Power Supply
1-3 (E)
PFV-L10
1-4. Installation Space
n
Do not block the ventilation holes of the unit.
Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte-
nance.
The outer dimensions of PFV-L10 are as shown here:
1-4. Installation Space
15.3
3-M4
76.2 353.2
91.7 231
115.5
31
88 (2U)
465
440
482
Unit: mm
PFV-L10
1-4 (E)
1-5. Installing Optional Board
Board retainer
PSW 3x6
MB-862 board
1
Side A
Board lever
Board guide rails
Main board
2
Board lever
Screws
Front panel
4. Insert the optional board along the board guide rails
with the board lever turned in the direction of the
arrow 1, securely connect it to the MB-862 board by
pushing.
5. Stick the slot label supplied with the optional board
onto the board lever.
6. Reinstall the board retainer.
7. Reinstall the front panel.
n
When removing the main board, turn the board lever in the
direction of the arrow 2, and pull out the board to ward
you.
1-5. Installing Optional Board
The optional board can be installed in any empty slot of
PFV-L10.
Installing Main Board (Front side)
1. Turn off the power switches A and B of PFV-L10.
2. Remove the front panel after loosening the two screws
on the panel.
3. After removing the two screws, remove the board
retainer.
Autres manuels pour PFV-L10
1
Table des matières
Autres manuels Sony Équipement d'enregistrement
Sony
Sony DPS-V77 Manuel utilisateur
Sony
Sony PFV-L02 Manuel utilisateur
Sony
Sony PCM-800 Manuel utilisateur
Sony
Sony XDCAM PDW-HD1200 Manuel utilisateur
Sony
Sony Anycast station AWS-G500 Manuel utilisateur
Sony
Sony RCD-W2000ES - Cd/cdr Recorder Manuel utilisateur
Sony
Sony RCD-W3 - Cd/cdr Recorder/player Manuel utilisateur
Sony
Sony STR-DA30ES - Fm Stereo/fm-am Receiver Manuel utilisateur
Sony
Sony SEG-2550 Manuel utilisateur
Sony
Sony TCD-D10 Manuel utilisateur
Sony
Sony RCD-W222ES - Cd/cdr Recorder Manuel utilisateur
Sony
Sony RCDW500C - Compact Disc Player Manuel utilisateur
Sony
Sony XDCAM PDW-HR1 Manuel utilisateur
Sony
Sony SRW-1 Manuel utilisateur
Sony
Sony MSU-700A Manuel utilisateur
Sony
Sony XDCAM PDW-HD1500 Manuel utilisateur
Sony
Sony XDCAM EX PMW-EX30 Manuel utilisateur
Sony
Sony TCM-4300 Manuel utilisateur
Sony
Sony TC-42 Manuel utilisateur
Sony
Sony BKPF-L632 Manuel utilisateur
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
