Sony Bravia KD-84X9000 Manuel utilisateur

SERVICE MANUAL

Version Date Subject

1.0 10/2012 Original manual issue.

2.0 10/2012 Added models KDL-84X9000(AF/AUS) and KD-84X9005(AEP).

Added pages of SEC1. DISASSEMBLY, APPENDIX-1 and APPENDIX-2.

3.0 11/2012 Added models KD-84X9000(HK/WB) and XBR-84X905(LA6).

4.0 03/2014 Added LCD PANEL KIT and pages of APPENDIX-3. Updated Parts List.

5.0 07/2014 Corrected Parts List. (P.110)

LCD Digital Color TV

9-888-517-05

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

ORIGINAL MANUAL ISSUE DATE: 10/2012 AZ3SRCHASSIS

Segment: FS-H

SERVICE MANUAL

LCD Digital Color TV

AZ3SRCHASSIS

Segment: FS-H

9-888-517-05

XBR/KD-84X9000 Series(WW) 3

MODEL LIST

MODEL COLOR COMMANDER DEST.

KD-84X9000 Black RM-SD016 CHINA

KD-84X9000 Black RM-GD025 AF

AFRICA

AUSTRALIA

INDIA

MIDDLE EAST

SOUTH EAST ASIA

KD-84X9000 Black RM-GD025 HONG KONG

KD-84X9000 Black RM-CD017 TAIWAN

KD-84X9005 Black RM-ED051 AEP

MODEL COLOR COMMANDER DEST.

XBR-84X900 Black RM-YD086 US/CND

RM-YD084 LA1

MEXICO

XBR-84X905 Black RM-YD085 LA6

CHILE

PERU

VENEZUELA

BRAZIL

XBR/KD-84X9000 Series(WW) 4

WARNINGS AND CAUTIONS - ENGLISH

CAUTION

These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

WARNING!!

An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis.

The chassis of this receiver is directly connected to the ac power line.

CARRYING THE TV

Be sure to follow these guidelines to protect your property and avoid causing serious injury.

• Carry the TV with an adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damages.

SAFETY-RELATED COMPONENT WARNING!!

Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony

parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.

Follow these procedures whenever critical components are replaced or improper operation is suspected.

XBR/KD-84X9000 Series(WW) 5

WARNINGS AND CAUTIONS - FRENCH

ATTENTION!!

Ces instructions de service sont à l’usage du personnel de service qualifi é seulement.

Pour prévenir le risque de choc électrique, ne pas faire l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifi é faire ainsi.

WARNING!!

Afi n d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le chássis de ce récepteur est

directement raccordé à l’alimentation du secteur.

POUR TRANSPORTER LE TÉLÉVISEUR

Tenez compte de ce qui suit pendant l’installation du téléviseur :

• Débranchez tous les câbles avant de transporter le téléviseur.

• Transportez le téléviseur avec le nombre de personnes approprié ; un téléviseur de grande taille doit être transporté par au moins deux personnes.

• Lors du transport du téléviseur, l’emplacement des mains est très important pour votre sécurité, ainsi que pour éviter de causer des dommages.

ALERTE!!

Afi n d’eviter tout risque d’electrocution provenant d’un chassis sous tension, un transformateur d’isolement doit etre utilise lors de tout depannage. Le chassis de ce recepteur est

directement raccorde a l’alimentation du secteur.

ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du

fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages

de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel. Suivre ces procedures lors de chaque remplacement de

composants critiques, ou lorsqu’un mauvais fonctionnement suspecte.

XBR/KD-84X9000 Series(WW) 6

WARNINGS AND CAUTIONS

USE CAUTION WHEN HANDLING THE LCD PANEL

When repairing the LCD panel, be sure you are grounded by using a wrist band.

When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.

1) Do not press on the panel or frame edge to avoid the risk of electric shock.

2) Do not scratch or press on the panel with any sharp objects.

3) Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

4) Do not expose the LCD panel to direct sunlight.

5) Avoid contact with water. It may cause a short circuit within the module.

6) Disconnect the AC power when replacing the backlight (CCFL) or inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms.)

7) Always clean the LCD panel with a soft cloth material.

8) Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.

9) Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).

10) It is recommended not to exceed 1 hour of Power-On nor Burn-in period with LCD panel face down condition, in repair activity.

XBR/KD-84X9000 Series(WW) 7

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.

3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators.

4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

5. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

8. For safety reasons, repairing the Power board and/or Inverter board is prohibited.

XBR/KD-84X9000 Series(WW) 8

SAFETY CHECK-OUT

Leakage Test

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed

metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).

Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’

instructions to use these instructions.

2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The

“limit” indication is 0.75 V, so analog meters must have an accurate low voltage scale.

The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs that are suitable. Nearly all

battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A).

How to Find a Good Earth Ground

A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also

at earth ground.

If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance

between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms.

If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not a neon lamp) between the hot

side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the

lamp should light at normal brilliance if the screw is at ground potential (see Figure B).

XBR/KD-84X9000 Series(WW) 9

SELF DIAGNOSIS FUNCTION

DIAGNOSTIC TEST INDICATORS

When an error occurs, the STANDBY LED will flash a set number of times to

indicate the possible cause of the problem.

If there is more than one error, the LED will identify the first of the problem areas.

Result for all of the following diagnostic items are displayed on screen.

If the screen displays a “0”, no error has occurred .

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.

The number of times the LED flashes translates to a probable source of the problem.

A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.

If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these

problems occur.

0.5

0.5 3

DISPLAY OF STANDBY LED FLASH COUNT

STBYLED

Flash time

Service menu Item

name

(Screeen Display)

Diagnostic Item Description

2 MAIN_POWE Main 12 Vfailure

DC_ALERT Main 5.0/3.3/1.2 Vfailure

AUD_PROT Audio amp. Protection

HDMI_EQ HDMI equalizer/switch I2C NACK

TU_DEMOD Tuner or demodulator I2C NACK

VLED LED voltage protection

LD_ERR

LED driver failure

FRC-LED driver SPI failure

ON_ERR

FPGAdevice(Shisar) initialization failure

FPGAdevice(Shisar) I2C NACK

HFR_ERR FRC device I2C NACK

TCON_ERR FRC device Initialization failure

P_ID_ERR

Panel ID EEPROMI2C NACK (Also panel power failure is a

suspect. PanelID NVMis mounted on ON3 board.)

P3L_ERR

SuperReso Device(Libra) I2C NACK

4K Photo FPGAdevice(Photo) initialization failure detection

6 BACKLITE Backlight converter OVP

7TEMP_ERR

Over temperature protection

Temp. sensor I2C NACK

8 -

Software Error (Also the main board•fs memoryor Wi-Fi

module is a suspect)

9 - Not used

10 - Not used

11 CV_ERR

CV3 FPGAdevice(Calvados) initialization failure

HDMI equalizer I2C NACK on CV3 board

12 ON_OUT_ER VBO LOCK Error

XBR/KD-84X9000 Series(WW) 10

SELF DIAGNOSIS FUNCTION

SELF-DIAGNOSTIC SCREEN DISPLAY

For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for

confirmation on the screen:

[To Bring Up Screen Test]

In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:

SELF CHECK

002 MAIN_POWE ---------- ---------- ---------- 00

003 DC_ALERT ---------- ---------- ---------- 00

003 AUD_PROT ---------- ---------- ---------- 00

003 HDMI_EQ ---------- ---------- ---------- 00

003 TU_DEMOD ---------- ---------- ---------- 00

004 VLED ---------- ---------- ---------- 00

004 LD_ERR ---------- ---------- ---------- 00

004 ON_ERR ---------- ---------- ---------- 00

005 HFR_ERR ---------- ---------- ---------- 00

005 TCON_ERR 1108231325 ---------- ---------- 01

005 P_ID_ERR ---------- ---------- ---------- 00

005 P3L_ERR ---------- ---------- ---------- 00

006 BACKLITE ---------- ---------- ---------- 00

007 TEMP_ERR ---------- ---------- ---------- 00

011 CV_ERR ---------- ---------- ---------- 00

012 ON_OUT_ER ---------- ---------- ---------- 00

101 VPC_WDT ---------- ---------- ---------- 00

102 MEPS_WDT ---------- ---------- ---------- 00

103 HOST_WDT ---------- ---------- ---------- 00

104 STBY_WDT ---------- ---------- ---------- 00

0081-00671-00088

[SELF DIAGNOSTIC SAMPLE SCREEN DISPLAY]

Error count (00-99)

Error history (Last failure time beforehand) *1

Error history (Failure time before last) *1

Error history (The last failure time) *1

Item name

STBY LED flash time

Total operation time by hour (MAX:65535)

Boot count (MAX:65535)

Panel operation time by hour (MAX:65535)

CPU Watch-dog timer

*1 : Format of error history

YYMMDDhhmm (in UTC)

Example:1108231325 -> Aug 23 13:25 2011 UTC

Autres manuels pour Bravia KD-84X9000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Téléviseur LCD

Sony

Sony AZ1-L CHASSIS Manuel utilisateur

Sony

Sony BRAVIA KLV-26S200A Manuel utilisateur

Sony

Sony KDL-19M4000/B - Bravia M Series Lcd... Manuel d'utilisation et d'entretien

Sony

Sony KDL-60EX645 Manuel utilisateur

Sony

Sony KLV-26M400A Manuel utilisateur

Sony

Sony XBR Grand WEGA KF-50XBR800 Manuel utilisateur

Sony

Sony BRAVIA KDL-40BX420 Manuel utilisateur

Sony

Sony BRAVIA KDL-40XBR4 Manuel utilisateur

Sony

Sony KDL-40VL130 - 40" Bravia Vl-series Lcd... Manuel utilisateur

Sony

Sony KDL-32EX700 - Bravia Ex Series Lcd... Manuel utilisateur

Sony

Sony BRAVIA KLV-52X200A Manuel utilisateur

Sony

Sony KLV-40V410A Manuel utilisateur

Sony

Sony Bravia KDL-46W5150 Manuel utilisateur

Sony

Sony Bravia KDL-52W5150 Manuel utilisateur

Sony

Sony KDL-26S3000 - 26" LCD TV Manuel utilisateur

Sony

Sony BRAVIA KLV-46W400A Manuel utilisateur

Sony

Sony WEGA KLV-20SR3 Manuel utilisateur

Sony

Sony KDL-65HX920 Manuel utilisateur

Sony

Sony BRAVIA KDL-55HX750 Manuel utilisateur

Sony

Sony KDL-40VL160 - 40" Bravia Vl Series Lcd Tv Manuel utilisateur

Sony

Sony WEGA KLV 21SR2 Manuel utilisateur

Sony

Sony WEGA KLV 23M1 Manuel utilisateur

Sony

Sony WEGA KLV 23M1 Manuel utilisateur

Sony

Sony KDL-46HX820 Instructions d'utilisation

Manuels Téléviseur LCD populaires d'autres marques

LG 32LC4R* Manuel utilisateur

ViewSonic

ViewSonic N4200w-1 VS10945-1M Manuel utilisateur

Salora

Salora 22LED1600 Manuel utilisateur

Samsung

Samsung LA32E420 Mode d’emploi

Dell

Dell W1900 19 Instructions d'utilisation

Samsung

Samsung LN40C670M1F Manuel utilisateur

Samsung

Samsung Series 4+ Manuel utilisateur

Samsung

Samsung 5 Series Manuel utilisateur

Grundig

Grundig 40 VLE 8230 BP Manuel utilisateur

Philips

Philips 43PFL4901/F7 Manuel utilisateur

LG 32LS350 Manuel utilisateur

VIORE

VIORE LED32VF60 Manuel utilisateur

Toshiba

Toshiba Regza 42HL167 Manuel utilisateur

JVC

JVC LT-32A220 Manuel utilisateur

Philips

Philips 20TA1000/93 Manuel utilisateur

Philips

Philips 32PFL3158T/12 Manuel utilisateur

Vizio

Vizio VP422HDTV10A - 42" Plasma TV Manuel utilisateur

Philips

Philips 40PFL7705D Manuel utilisateur