Sony Ipela NSR-S10 Manuel utilisateur

Network

Surveillance

Recorder

User’s Guide

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

NSR-S10/S20

4-262-347-12 (1)

2Table of Contents

Table of Contents

Chapter 1 Introduction

Overview...........................................................................................5

System Requirements .....................................................................6

Features and Functions ..................................................................6

Front panel............................................................................................. 6

Rear panel.............................................................................................. 6

Infrared remote control unit .................................................................. 7

Chapter 2 Operation and Control

Overview...........................................................................................9

Logging On to the NSR ...................................................................9

Basic Window Operations ............................................................11

Monitoring ......................................................................................15

Monitoring Live Images ...................................................................... 15

Displaying images from different cameras in succession

(AutoScan) ................................................................................. 15

Functions and Operating Procedure of “Monitoring (LIVE)”

Screen......................................................................................... 16

Controlling Cameras .....................................................................17

Using Camera Presets.......................................................................... 17

Recording, Searching, and Playing Images ................................18

Recording Camera Images .................................................................. 18

Playing Recorded Images .................................................................... 19

Searching by Event.............................................................................. 20

Setting a Bookmark ............................................................................. 21

Functions and Operating Procedure of “Playback” Screen................. 22

Exporting Recorded Images .........................................................23

Backing Up Recorded Images ............................................................. 23

Exporting Recorded Images as Movies............................................... 24

Exporting Recorded Images as Still Images........................................ 25

Releasing Alarms...........................................................................26

System Administration..................................................................26

Changing the Password ....................................................................... 26

Shutting Down, Restarting and Logging Off...............................27

Table of Contents 3

Chapter 3 Monitoring from a Web Browser (WebViewer)

Overview.........................................................................................28

Accessing the NSR from a Web Browser ........................................... 28

Functions and Operating Procedure of WebViewer Page................... 30

Chapter 4 Detailed Descriptions of Settings and Windows

Available Settings..........................................................................33

Displaying “Setting” screen .........................................................33

System Setting...............................................................................35

Settings Related to the System ............................................................ 35

Adding a Storage Location.................................................................. 36

Importing/Exporting Configuration Data............................................ 36

“System Setting” Screen Details ......................................................... 38

Camera Setting ..............................................................................40

Settings Related to the Cameras.......................................................... 40

Camera Settings................................................................................... 41

Advanced Camera Settings ................................................................. 41

“Camera Setting” Screen Details ........................................................ 43

Recording Setting..........................................................................45

Making Settings Related to Recording................................................ 46

Recording Mode Combinations for Schedule Recording.................... 46

Setting a Schedule ............................................................................... 47

Details of “Recording Setting” Screen................................................ 48

Network Setting ............................................................................49

Settings Related to the Network......................................................... 49

“Network Setting” Screen Details ....................................................... 50

Sensor Setting ...............................................................................52

Settings Related to Sensor Input ......................................................... 52

“Sensor Setting” Screen Details .......................................................... 52

Relay Setting ..................................................................................53

Settings Related to Relays................................................................... 53

“Relay Setting” Screen Details............................................................ 53

Alarm Setting .................................................................................55

Settings Related to Alarms .................................................................. 55

Registering the Alarm Settings............................................................ 56

“Alarm Setting” Screen Details........................................................... 57

User Setting....................................................................................61

Registering a User ............................................................................... 61

“User Setting” Screen Details ............................................................. 61

4Table of Contents

Chapter 5 Miscellaneous

Firmware Update............................................................................63

I/O Port............................................................................................64

Troubleshooting ............................................................................65

Specifications ................................................................................66

NSR-S10/S20 ...................................................................................... 66

Trademarks

• “IPELA” and are trademarks of Sony Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Other products or system names appearing in this document are trademarks or registered

trademarks of their respective owners.

Further, the ®‚ or ™symbols are not used in the text.

Overview

Chapter

Chapter 1 Introduction

Introduction

Overview

The NSR-S10/S20 is a network surveillance recorder for network cameras. The server allows you to monitor and record

JPEG, MPEG-4 and H.264 images from network cameras via the network. The server also allows you to easily search for

and play back previously recorded images.

Manage and control compatible cameras from remote locations

You can manage, control, and display the images from up to four network cameras with the NSR-S10, and up to eight

network cameras with the NSR-S20. You can pan, tilt, and perform zoom operations of compatible cameras.

Large-capacity hard disks allow recording for long periods of time

Models with internal hard disks are equipped with large-capacity storage that enables recording for extended periods of

time. In addition, the unit allows you to connect storage devices that support the e-SATA interface.

Monitor from a browser

You can access the NSR from a computer browser, which then can be used to monitor, record, or play back images.

Other features

• The NSR is capable of continuous recording, motion detection, and alarm recording, among others.

• Run searches for recorded images by date and time, sensors, movement detection, video signal loss, etc.

• Audio recording and playback 1) are also supported from compatible cameras.

1) Optional audio amplifiers or speakers are required.

• This manual uses screen examples of NSR-S10 in the explanations.

• This manual describes the installation and initial setup of this unit. For details on the various settings for this unit, refer

to chapter 4, “Detailed Descriptions of Settings and Windows” (page 33).

• For details on the system requirements for client computers, supported camera models, and other important information,

refer to the Release Note (PDF).

Access the following URL to download the Release Note.

http://www.sony.co.jp/Products/NSR/NSR-S_ReleaseNote_E.pdf

Important

Monitor

Network

Surveillance cameras

Windows PC

Keyboard

Mouse

6System Requirements / Features and Functions

Chapter 1 Introduction

System Requirements

The hardware required in order to use this recorder is as

follows.

• Monitor1)

• Sony Network Camera

Contact your Sony dealer for details about compatible

Sony network cameras.

• USB keyboard2)

•USBmouse

•Networkswitch

• 1000Base-T/100Base-TX/10Base-T cable

• USB flash memory device4)

1) This unit supports computer displays that support analog

RGB input.

2) Use a USB keyboard with a cable. Note that wireless or

infrared USB keyboards may not function with this unit. In

addition, nonstandard keys may not function.

3) Use a USB mouse with a cable. Wireless or infrared USB

mice may not function properly. Functions such as three-

button and wheel operations may also function improperly.

4) Required when exporting videos or still images.

- This unit supports USB 2.0 Mass Storage devices.

However, it does not support USB 2.0 Mass Storage HDDs

or CD/DVD drives. Do not connect mass storage devices

other than USB memory devices to the unit. Be aware that

errors may still occur when writing data to a USB 2.0 Mass

Storage memory device, depending on the type of device

used. If errors occur when writing data, use a USB flash

memory device of a different type.

Features and Functions

Front panel

APOWER LED

Lights green when the unit is turned on.

BHDD LED

Blinks green when the internal hard disks are accessed.

CInfrared sensor

Receives signals from the infrared remote control unit.

DNETWORK LED (1, 2)

Lights green when there is activity at the

corresponding LAN connector at the rear of the NSR.

EUSB connector

Use this connector to connect a USB keyboard, USB

mouse or USB flash memory to the NSR.

Rear panel

ASecurity slot

Attach an anti-theft cable here.

BUSB connector

Use this connector to connect a USB keyboard, USB

mouse or USB flash memory to the NSR.

CMonitor connector

Use this connector to connect a monitor.

Features and Functions

Chapter 1 Introduction

DI/O Port

Use this connector to connect audio, sensor inputs, and

relay outputs.

For connection details and wiring diagrams for sensor

inputs, see “I/O Port” (page 64).

Ee-SATA connector

Use this connector to connect storage devices that

support the e-SATA interface.

FLAN connectors (1, 2)

Use these connectors to connect 10 Base-T, 100 Base-

TX, or 1000 Base-T network cables.

The top connector is LAN2, and the bottom connector

is LAN1.

LAN1: Network camera

LAN2: Network camera (LAN2 can only be used

when using a different segment from LAN1.)

CAUTION for LAN ports

For safety reason, do not connect the LAN ports to any

network devices that might have excessive voltage.

Follow the instructions for the above ports.

G1Power switch

Press this to turn on the unit.

Although this button can be used to force a shut off of

power to the unit, under normal circumstances the

shutdown command on the screen should be used.

HDC IN connector (12V)

Use this connector to connect the AC adapter.

ICable clamp hole

Attach the supplied cable clamp here to prevent the

power cord from disconnecting.

Infrared remote control unit

If a button on the infrared remote control unit is pressed

while the remote control unit is pointed at the infrared

sensor on the main unit, then the main unit will perform the

operation corresponding to that button.

APlay button

Use this button to play recorded images.

m(Fast Rewind) button

Use this button for fast rewind. (2x, 4x, 8x, 16x, 32x,

64x speed)

n(Reverse Play) button

Use this button to play recorded images in reverse.

u(Play/Pause) button

During pause: Use this button for playback.

(1x speed).

During playback: Use this button to pause playback.

M(Fast Forward) button

Use this button for fast forward. (2x, 4x, 8x, 16x, 32x,

64x speed)

t(Slow Rewind) button

Use this button for slow rewind. (1/2 speed, 1/4 speed)

c(Previous) button

Use this button to go back one frame.

T(Slow Forward) button

Use this button for slow forward. (1/2 speed, 1/4

speed)

C(Next) button

Use this button to advance one frame.

BLIVE/PB button

Use this button to switch between live image display

and playback of recorded images.

Note

8Features and Functions

Chapter 1 Introduction

C(Soft Keyboard) button

Use this button to display the soft keyboard that is used

for text input.

DPRESET button

Use this button to move the camera to a preset

position.

E+ / – (Camera Number) Button

Use these buttons to switch between cameras for

selection.

Press the [+] button to select the next camera number,

and the [–] button to select the previous camera

number.

F(2 × 2 Layout) button

This button switches the screen layout to 2 × 2 (4

screen).

G(1 × 1 Layout) button

This button switches the screen layout to 1 × 1 (1

screen).

HNumeric keys

Use these keys to input numbers.

IOperation selection buttons

Use these buttons to select items.

Vbutton

Use this button to move the focus cursor upwards in

order to select an item that is higher on the screen.

Bbutton

Use this button to move the focus cursor to the left in

order to select an item that is located to the left on the

screen.

vbutton

Use this button to move the focus cursor downwards in

order to select an item that is lower on the screen.

bbutton

Use this button to move the focus cursor to the right in

order to select an item that is located to the right on the

screen.

ENTER button

Use this button to confirm the selection of the current

item or monitor frame, and to execute other

operations.

Before using the infrared remote control

unit

Remove the insulating sheet.

Replacing the lithium battery in the infrared

remote control unit

The infrared remote control unit uses a standard CR2025

lithium battery. Do not use any battery other than the

CR2025.

While holding down the locking lever (1), pull the

battery holder out (2).

Insert the battery with the “+” side facing up (1) and

then push the battery holder in until it clicks into

place (2).

Caution

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

When you dispose of the battery, you must obey the law in

the relative area or country.

Battery replacement interval

When the lithium battery becomes weak, the unit may not

respond even when the buttons are pressed. The average

life of a lithium battery used in this unit is one year, but this

will vary according to how frequently the unit is used. If

the main unit does not respond when buttons on the remote

control are pressed, replace the battery and try the

operation again.

Insulating sheet

“+” side faces up

Overview / Logging On to the NSR

Chapter

Chapter 2 Operation and Control

Operation and Control

Overview

This chapter describes how to perform the basic operations

listed below on the NSR, including logging on; using

various windows; monitoring; and how to record, retrieve

and play back images.

•Logging On to the NSR (page 9)

•Basic Window Operations (page 11)

•Monitoring (page 15)

•Controlling Cameras (page 17)

•Recording, Searching, and Playing Images (page 18)

•Exporting Recorded Images (page 23)

•Releasing Alarms (page 26)

•System Administration (page 26)

•Shutting Down, Restarting and Logging Off (page 27)

For details on operation from a computer’s browser, refer

to Chapter 3, “Monitoring from a Web Browser

(WebViewer)” (page 28); for details on the camera and on

various settings for recording, sensors, and alarms, refer to

“Detailed Descriptions of Settings and Windows”

(page 33).

Logging On to the NSR

Before you can use the NSR, you must first log on.

Turn on the NSR.

The power comes on automatically when the power

cord of the AC adapter is plugged into the power

outlet.

After the NSR has been turned off either by a screen-

based operation or by the power switch on the rear

panel, the power can be turned back on by pressing the

power switch.

The unit beeps, and the POWER LED on the front

panel lights green.

After a minute or two, the startup screen appears on the

monitor.

After startup, the “Main” screen appears.

• The user ID and password for logging in to the

“Main” screen are as follows.

Default user ID: admin

Default password: admin

• For details how to change the auto login setting,

refer to “Settings Related to the System” (page 35).

Note

10 Logging On to the NSR

Chapter 2 Operation and Control

Cameras connected to the same segment on the

network are automatically located and registered to the

NSR, and images from these cameras appear on the

“Main” screen.

Continuous recording starts automatically after the

cameras are registered.

Autres manuels pour Ipela NSR-S10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony DVR

Sony

Sony HVO-500MD Manuel utilisateur

Sony

Sony Digital Betacam DVW-2000 Manuel utilisateur

Sony

Sony Handycam HDR-CX240 Manuel utilisateur

Sony

Sony SVR-3000 - Digital Network Recorder Manuel d'utilisation et d'entretien

Sony

Sony Digital 8 DCR-TRV130E Manuel utilisateur

Sony

Sony DNW-A100 Manuel utilisateur

Sony

Sony SRW-5001 Manuel utilisateur

Sony

Sony HVO-4000MT Manuel utilisateur

Sony

Sony Walkman GV-8 Manuel utilisateur

Sony

Sony DHG-HDD250 - 30-Hour High-Definition Digital Video... Manuel utilisateur

Sony

Sony PSX DESR-7500 Manuel technique

Sony

Sony SVR-S500 Manuel utilisateur

Sony

Sony Video Walkman GV-S50 Manuel utilisateur

Sony

Sony HVO-500MD Manuel utilisateur

Sony

Sony DHG-HDD500 - Hi Definition Digital Video... Manuel d'utilisation et d'entretien

Sony

Sony DHG-HDD250 - 30-Hour High-Definition Digital Video... Manuel utilisateur

Sony

Sony Vaio PCG-GRT240G Instructions d'utilisation

Sony

Sony HVR-S270E Manuel utilisateur

Sony

Sony PWS-4400 Manuel utilisateur

Sony

Sony DNW-A25 Manuel utilisateur

Sony

Sony HVO-4000MT Manuel utilisateur

Sony

Sony HVO-3300MT Manuel utilisateur

Sony

Sony HANDYCAM DCR-DVD650 Manuel utilisateur

Sony

Sony NSR-1000 Series Comment utiliser

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur