Sony Ericsson K660i Manuel utilisateur

Installation Instruction, Mechanical

1208-1790 Rev 2

Installation Instruction, Mechanical

Applicable for K660i

Contents

1General...............................................................................................................2

2Hardware............................................................................................................2

2.1 Setup.....................................................................................................2

2.2 Computer...............................................................................................3

2.3 Sony Ericsson programming interface – DCU-60 .................................3

2.4 Smart Card Reader/Service Card .........................................................3

2.5 USB Activation Dongle..........................................................................3

2.6 Infrared Device......................................................................................3

2.7 Bluetooth Device ...................................................................................3

2.8 Label Printer..........................................................................................4

2.9 Power Supply and Jumper Cables (optional)........................................4

3Software.............................................................................................................5

3.1 EMMA III................................................................................................5

3.2 Labelmake II software...........................................................................5

4Revision History................................................................................................6

Company Internal ©Sony Ericsson Mobile Communications AB

Installation Instruction, Mechanical

1208-1790 Rev 2 2(6)

1 General

This document describes the installation procedure for the Mechanical repair

package.

2 Hardware

All hardware necessary for this product’s setup is documented in the Mechanical

Equipment List.

2.1 Setup

Company Internal ©Sony Ericsson Mobile Communications AB

Installation Instruction, Mechanical

1208-1790 Rev 2 3(6)

2.2 Computer

An IBM compatible computer (34) is required. The computer should include at least

three USB-ports. Refer to the Equipment List for minimum computer requirements.

2.3 Sony Ericsson programming interface – DCU-60

The cable is the interface between Computer and the phone. The DCU- 60 (POS-5)

cable should be connected to a USB-port on the computer.

2.4 Smart Card Reader/Service Card

NOTE! The Smart Card Reader/Service Card is only needed for LabelmakeII.

Smart Card Reader (7) Service Card (8)

The Smart Card Reader comes with the necessary software and instructions for

installation.

1. Connect the Smart Card Reader (7) to one of the USB ports on the computer

(34).

2. Install Service Card (8) into the Smart Card Reader (7).

2.5 USB Activation Dongle

A USB Activation Dongle is required for activation in EMMA III. Refer to the EMMA III

Homepage available from CSPN, for installation instructions.

2.6 Infrared Device

An RS-232 or USB type Infrared adapter (POS-44) may be used to verify the Infrared

function in the phone. Install according to the manufacturer’s instructions.

2.7 Bluetooth Device

Any Bluetooth device (POS-45) such as a headset or Bluetooth phone can be used

to verify the Bluetooth function in the phone. Set up the connection according to the

chosen equipment’s manufacturer’s instructions.

Company Internal ©Sony Ericsson Mobile Communications AB

Installation Instruction, Mechanical

1208-1790 Rev 2 4(6)

2.8 Label Printer

A Zebra printer (41) should be set up to print labels. Connect the printer with a Null

Modem (42) cable to the serial port on the computer (34). Read the Zebra installation

manual for more information about the installation.

Refer to Equipment list for support Zebra printers.

2.9 Power Supply and Jumper Cables (optional)

1. Install the power supply (POS-77) according to the manufacturer’s instructions.

2. Connect the jumper cables to the power supply’s (POS-77) output terminals. Red

(POS-88) to the positive output terminal and black (POS-89) to the negative

output terminal.

3. Connect the banana plugs of the red and black jumper cables to the battery

eliminator’s (POS-52) red and black connectors.

4. Set the output of the Power Supply as follows:

•Voltage: 3.8Vdc

•Current: 2.0 Amps

Company Internal ©Sony Ericsson Mobile Communications AB

Installation Instruction, Mechanical

1208-1790 Rev 2 5(6)

3 Software

3.1 EMMA III

EMMA III contains software upgrades and tools that are required for servicing this

phone. Installation and user manuals are accessible through CSPN web page.

1. Log onto CSPN. (https://cspn.extranet.sonyericsson.com)

2. Select “EMMA III” from the drop down menu.

3. Select “GO TO EMMA III HOME PAGE”.

4. Select “Installation Guide” under Documentation and follow the directions for

installation.

3.2 Labelmake II software

The LabelMake II software is an application that allows new labels to be printed with

a Zebra printer.

1. Log onto CSPN. (https://cspn.extranet.sonyericsson.com.)

2. Select “LabelMake II” from the drop down menu.

3. Press “START LabelMake II” button and you will be directed to the

LABELMAKE II client page.

4. Select “Launch Labelmake II client” and follow the installation instructions.

Company Internal ©Sony Ericsson Mobile Communications AB

Installation Instruction, Mechanical

1208-1790 Rev 2 6(6)

4 Revision History

Rev. Date Changes / Comments

1 2008-02-29 First Release

Company Internal ©Sony Ericsson Mobile Communications AB

www.s-manuals.com

Autres manuels pour K660i

Table des matières

Autres manuels Sony Ericsson Téléphone portable

Sony Ericsson

Sony Ericsson W700i Manuel utilisateur

Sony Ericsson

Sony Ericsson WALKMAN W200 Manuel utilisateur

Sony Ericsson

Sony Ericsson SK17i Manuel technique

Sony Ericsson

Sony Ericsson Walkman W300i Manuel utilisateur

Sony Ericsson

Sony Ericsson Z780i Manuel utilisateur

Sony Ericsson

Sony Ericsson T628 Guide de référence rapide

Sony Ericsson

Sony Ericsson XPERIA ACRO IS11S Guide d'installation

Sony Ericsson

Sony Ericsson K200 Manuel utilisateur

Sony Ericsson

Sony Ericsson LT18i Guide de référence

Sony Ericsson

Sony Ericsson P990i Manuel utilisateur

Sony Ericsson

Sony Ericsson K800i Manuel utilisateur

Sony Ericsson

Sony Ericsson K610i Manuel utilisateur

Sony Ericsson

Sony Ericsson Walkman W980 Comment utiliser

Sony Ericsson

Sony Ericsson K850 Manuel utilisateur

Sony Ericsson

Sony Ericsson W41S Guide d'installation

Sony Ericsson

Sony Ericsson T700 Manuel utilisateur

Sony Ericsson

Sony Ericsson M600i Manuel utilisateur

Sony Ericsson

Sony Ericsson W880i Manuel utilisateur

Sony Ericsson

Sony Ericsson K608i Manuel utilisateur

Sony Ericsson

Sony Ericsson K700 Guide de référence rapide

Sony Ericsson

Sony Ericsson K790i Manuel utilisateur

Sony Ericsson

Sony Ericsson STICK MICRO W995 Manuel utilisateur

Sony Ericsson

Sony Ericsson T39M Manuel

Sony Ericsson

Sony Ericsson T290i Guide de référence rapide

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur