Sonoff BASICR3 Manuel utilisateur
BASICR3 RFR3
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –12
Čeština
13 –22
Slovenčina
23 –32
Magyar
33 –42
Deutsch
43 –52
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Operating Instruction
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help
when installing and repairing! Please do not touch the switch during use.
Wiring instruction
To remove the protective cover, then connect wires before fixing the wire fastener.
To make sure a full installation, please align “ ” with “ ” when securing the protective
cover.
5
Ceiling lamp wiring instruction:
Make sure
the neutral wire and live wire connection is correct.
Download APP
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the first
use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and
release
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you
want to
enter this mode, please long press the manual button for about 5s until the Wi-Fi LED
indicator changes in a cycle of two short and one long flash and release.
LED
Drive
r
N Out
N In
L Out
L In
L Out
N Out
N In
L In
6
Add the device
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to
pair.
•Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
two short flashes and one long flash and release. Long press Pairing button for 5s
again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
•Tap "+" and select “Compatible Pairing Mode “on APP. Select Wi-Fi SSID with
ITEAD-****** and enter the password 1 2345678, and then go back to eWeLink
APP and tap "Next". Be patient until pairing completes.
Specifications
Model
BASICR3/BASICRFR3
Input
100-240V AC 50/60Hz 10A Max
Output
100-240V AC 50/60Hz 10A Max
Operating systems
Android & iOS
Wi-Fi
EEE 802.11 b/g
RF
433.92MHz
Material
PC V0
Dimension
91x43x25mm
BASICR3 does not support the remote controller with 433.92MHz.
Quick Pairing
7
Production Introduction
The device weight than 1 kg. The installation heigh of less than 2 m is recommended.
Wi-Fi LED indicator status instruction
Wi-Fi LED indicator status
Status instruction
Flashes (one long and two short)
Quick Pairing Mode
Keeps on
Device is connected successfully
Flashes quickly
Compatible Pairing Mode
Flashes quickly once
Unable to discover the router
Flashes quickly twice
Connect to the router but fail to connect
to Wi-Fi.
Flashes quickly three times
Upgrading
Features
Turn on/off the device from anywhere, schedule power on/off and share APP with your
family to control.
Remote Control
Single/
Countdown
Timing
Voice Control
Share Control
Smart Scene
Sync Status
433MHz
Remote
Control
Camera Linking
Power-on State
LAN Control
Pairing button
Manual Switch
Wire Fastener Cover
BASICR3: On/off LED indicator (Red)
BASICFR3: Remote-controlled LED
indicator (Red)
Wi-Fi LED indicator
(Blue)
8
RF Remote Controller Pairing
The BASICRFR3 supports the remote controller with 433.92M Hz frequency brand to turn
on/off, and each channel can learn it independently, which is local short-range wireless
control not Wi-Fi control.
Pairing Method:
Long press the pairing button for 3s until the red LED indicator flashes red once, then
short press the remote control button you want to pair for successful learning.
Clearing Method:
Long press the pairing button for 5s until the red LED indicator flashes red twice, then
short press the learned button corresponding to the remote controller to clear code
values of all learned buttons.
Switch Network
If you need to change the network, long press the pairing button for 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash and release, then the
device enters quick pairing mode and you can pair again.
9
Factory Reset
Deleting the device on the eWeLin k app indicates you restore it to factory setting.
Common Problems
Q: Why my device stays “Offline?”
A: The newly added device needs 1-2 mins to connect Wi-Fi and network. If it stays
offline for a long time, please judge these problems by the blue Wi-Fi indicator status:
1. The blue Wi-Fi indicator quickly flashes once per second, which means that the
switch failed to connect your Wi-Fi:
1) Maybe you have entered a wrong Wi-Fi password.
2) Maybe there´s too much distance between the switch your router or the
environment causes interference, consider getting close to the router. If
failed please add it again.
3) The 5G Wi-Fi network is not supported and only supports the 2.4GHz
wireless network.
4) Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile data
network on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quicky flashes twice per second, which means your device has
connected to Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means
you access an unsteady network, not a product problem. If thenetwork is normal,
try turn off the power to restart switch.
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
Autres manuels pour BASICR3
3
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Sonoff Relais
