SONIQ F700-NZ Manuel utilisateur

F700-NZ

- 1 -

Int

Congratulations on purchasing this Digital Photo Frame. You can

now view all your photos(saved as JPEGs) anywhere in your home.

Please read the warnings on page 12 carefully before using your

Digital Photo Frame.

What is JPEG?

JPEG or jpg format is a particular type of file format. Your Digital

Photo Frame can only play this type of file. When you take a picture with

your digital camera it will normally create a JPEG file. You can tell which

files are in JPEG format by looking at the file extension (the end of the

file name) were it should say .jpeg or .jpg, for example photo1.jpg. If this

is not the case, they can probably be converted. You can call the

Customer Helpline for advice on how to do this.

Introduction

- 2 -

Digital Photo Frame AC Adaptor

Need something else?

There are a wide range of accessories and other products that can

be ordered direct to your door from SONIQ.

For more information see www.soniq.com.

ou should have

- 14 -

Description Specification

Volume 20.4x14.3x2.3cm

7 inch TFT LCD,display ratio 16:10

Display Area(mm) 139.4(H) x 86.58(V)

Display

Number of Pixels 432(H) x 3(RGB) x 234(V)

Power <10W

Operating current 1MAX=800mA

Operating temperature -5℃- 40℃

Power supply adapter IN:100-240V/50-60Hz AC OUT:5V 1A DC

Card reader SD/MMC/MS card reader

USB USB 2.0

File Format JPEG、BMP

Technical specifications

- 3 -

Your Digital Photo Frame……………………………………………….4

Table of Contents

FAQ’S ………………………………………………………………………

Set up……………………………………………………………………….5

Advanced use…………………………………………………………….

Everyday use……………………………………………………………...6

Troubleshooting………………………………………………………….

Warnings ………………………………………………………………….

Technical specifications………………………………………………..

- 4 -

NOTE:

PLAY/PAUSE button－use to play

and pause. Press and hold for 3 seconds

to switch the unit ON and OFF.

NEXT button (right button)－use to

navigate Right.Press and hold for 3

seconds to navigate down.

PREVIOUS button (left button)－use to

navigate Left.Press and hold for 3 seconds

to navigate up.

EXIT－Press to exit the Menu.

MENU－Press to enter the Setup Menu.

our Digital Photo Frame

PREVIOUS button

NEXT button

PLAY/PAUSE button

USB port

Memory card slot

DC IN 5V jack

Wall mount Table stand

MENU button

EXIT button

- 13 -

This product was designd and manufactured to meet strict quality

and safety standards. There are, however, some operation precautions

that you should be aware of:

● Do not attempt to operate the Digital Photo Frame with a damaged power cord/AC

adaptor or if it is not working correctly in any way. Never adjust or modify the Digital

Photo Frame yourself, always take it to an authorized Service Centre.

● Position the power cord/AC adaptor so that it does not cause a hazard and is not

near any sharp surfaces.

● The AC adaptor of this Digital Photo Frame is not replaceable by the user. If the

supply cord of the Digital Photo Frame is damaged it must be replaced by a qualified

Service Centre.

● Do not use with an extension lead.

● If the Digital Photo Frame is not to be used for a long period remove the plug from

the mains socket.

● Do not place in or near water, or in damp conditions.

● To avoid electrical shock, never touch the Digital Photo Frame or plug with wet

hands.

● Do not place objects that could cause a fire hazard on top of the Digital Photo

Frame such as candles.

● When transporting the Digital Photo Frame always use the original packaging.

● Do not place anything on top of the Digital Photo Frame, such as vases or potted

plants.

● Do not use the Digital Photo Frame outdoors.

● Hold the plug to disconnect it from a wall socket. Do not pull the power cord.

● All servicing must be done by qualified personnel only.

● Do not expose the Digital Photo Frame, components, or batteries to excessive heat,

sunshine, or any naked flames.

● The AC adaptor is used as the disconnect device and it shall remain readily

operable. If a malfunction occurs, disconnect the AC adaptor from the wall outlet at

once.

Warnings

- 12 -

Q:If I keep showing the same photo for a long time will it damage the

LCD screen?

A:No.The Digital Picture Frame can display the same photo continuously

for a long time. But it is recommended not to show the same

continuously for more than 1 month as this may screen burn

discolouration.

Q:Does the Digital Picture Frame have built-in memory?

A:The Digital Picture Frame does not have any internal memory to store

your photos. You must use a compatible memory card.

Q:What is the maximum picture size?

A:This unit supports JPEG pictures up to 10 Mega Pixels.

Q:What is the best picture resolution displayed on the screen?

A:The frame’s best resolution is 432 X 234 pixels.

Q:Why doesn’t the unit show some of my photos?

A:The Digital Picture Frame is designed to show photos following the

same camera industry standards format as digital cameras. This format

is a JPEG format. Images, such as web images, scanned images, or

photos in RAW format, are not stored according to camera industry

standards and therefore cannot be displayed correctly on the Digital

Picture Frame. Please ensure your camera is set to store pictures as

JPEG files or alternatively use a computer program to convert such

images before viewing them.

Frequently asked questions

- 5 -

Using the stand

Open the package remove

the protective sleeve from the unit.

Pull out and rotate the table stand

on the rear of your Digital Photo

Frame into the position shown.The

photo frame can be used in either

portrait or landscape.

Using the AC Adapter

1.Plug the adaptor into the DC IN 5V

socket on the side of your Digital

Photo Frame.

2.Plug the adaptor into a standard

three pin wall socket and switch

the power on at the wall.

3.Your Digital Photo Frame will

automatically switch itself on.

NOTE:

Wall mounting

Alternatively you can wall-mount the unit using the mounting hole at the back.

(Please note that the mountings are not included as part of this package but you can

Set u

use a standard screw head to the unit.)

support

- 6 -

Playing your photos

You can play a slide show of your photos using the memory card

slot from either a SD、MMC or MS card. You can also play photos

stored on a USB flash drive.

1.Insert your memory card or

USB drive into the slot on the

side of your Digital Photo Frame.

2.It should automatically start playing the photos with the default settings

applied.

press the button to select.

Depending on your settings it may open in either the thumbnail or file

manager modes. You can select the photo you want using the or

and button and button.

If both a memory card and USB drive are attached the Photo Frame will

default to the USB drive.

Setting the time

press the button to select, the system will enter the time setting menu.

1.Press the button to select whether to display the clock or clock and

calendar. You can scroll up and down by holding the or buttons

for 3 seconds.

Ever

use

3.If it doesn’t start playing Photo from the main menu using the or ,

Select Clock from the main menu using the or buttons and

- 11 -

If you experience problems with your Digital Photo Frame, the

following guide may help you resolve the problem.

Problem Possible cause What to do

Digital Picture

Frame doesn’t

power on

The POWER

connector to the

unit is not securely

inserted

Make sure you connect the AC adapter to the

frame properly and make sure you have

powered on the unit by using the

PLAY/PAUSE button. When you connect the

AC adapter to the frame and power up the

unit, even without a memory card, you should

see a blank screen. If you don’t see the lit

screen, check if the power is connected to the

Digital Picture Frame and make sure it is

securely attached

No Start-up

screen Memory card is not

inserted correctly Insert a supported memory card.

No photo on the

memory card Card is wrongly

inserted Verify if the way you inserted the card is

correct. Make sure the front label of the

memory card is facing AWAY from you. Do

not force the memory card into the slot.

The file doesn’t

play Incompatible file

format Make sure there is at least one supported

photo file on the memory card. Compatible

photo format:JPEG and BMP.

Troubleshooting

- 10 -

●Media: Choose the media source from which the photos are playing,

between USB and Memory Card.

●Default: Reset to the original system settings.

Exit

Back to the main menu.

Advanced use

- 7 -

2.Hold the button for 3 seconds to scroll down to Set Time .Press the

button to set the time.

the button to move to the minutes. Repeat for the minutes and seconds.

4.Once complete press the or buttons to move to OK and press

to select.

Setting the Calendar

Select Calendar from the main menu using the or buttons

and press the button to select, the system will enter the date setting

menu.

1.Hold the button for 3 seconds to scroll down to Set Date .Press the

button to set the time.

2.Hold the or buttons for 3 seconds to select the year. Then

press the button to move to the month. Repeat for the day.

3.Once complete press the or buttons to move to OK and press

to select.

If you select Display you can see a calendar view. Press the and

buttons to select the year, press and hold to select the month.

Automatic power OFF/ON

You can set your Digital Photo Frame to turn itself on or off at a

given time.

You can navigate the menu using the or buttons as

mentioned in previous.

Ever

use

3.Hold the or buttons for 3 seconds to select the hour. Then press

- 8 -

You can press the MENU button at any time to enter the setup menu.

This will allow you to change some of the advanced settings on your Digital

Photo Frame.

The setup menu has 5 sub menus that can be navigated using the

control panel as explained on page 3.

Photo setting

●Interval Time:This option can be used to set the length of time for

display of each image from: 5 seconds, 10 seconds, 15 seconds, 30

seconds, one minute to three minutes.

●Transition Effect:This option is used to set the transition effect from

one photo to another. Choose between the different effects or choose

Random to get a different transition each time.

●Show Type:This option lets you decide whether the photo is displayed on

screen using Fit Screen (photo is always fully on the screen) or Full Screen

(photo always fills the screen – some clipping may occur).

●Slide Mode:This option allows you to set the Slide mode. There are two

available options: Normal and Motion.

●Browse: There are two kinds of Photo modes, File Manager mode, and

Thumbnail. Choose this depending on your preference and whether you

prefer to have a clock and calendar on screen with your photos.

Auto play

When Auto-Play is activated (ON) the picture frame will start a

slideshow immediately after selecting the photo icon.

When Auto-Play is not activated (OFF) the picture frame will enter

either File Manager mode or Thumbnail mode, according to the settings

in Photo Setting > Browse.

Advanced use

- 9 -

Display Setup

●Brightness:This option can be used to set the screen brightness. You

can choose from: Normal, Bright and Soft.

●Contrast:This option can be used to set the screen contrast. The contrast

can be set from -4 to 4.

●TFT Brightness:This option can be used to set the screen brightness.

The brightness can be set from -4 to 4.

●TFT Contrast:This option can be used to set the screen contrast. The

contrast can be set from -4 to 4.

●TFT Saturation:This option can be used to set the saturation of the

display. The saturation can be set from -4 to 4.

Custom setup

●OSD Language:This option can be used to set the language on screen.

You can choose from: English, French, German, Italian, Spanish,

Portuguese, Dutch, and Polish.

●Encoding: This option sets the character encoding of the filenames-

if using Central European fonts you will need to change from Western

European to Central European mode.

●Repeat mode:This option allows you to set the play repeat mode. There

are four available options: Off, One, Folder, and All.

-Off: turns off the repeat mode.

-One: repeats the file that is currently playing.

-Folder: repeats the folder that is currently playing.

-All: repeatedly plays all of the files inside the storage medium.

Advanced use

Autres manuels SONIQ Cadre photo numérique

SONIQ

SONIQ Qframe QFD15B Manuel utilisateur

SONIQ

SONIQ Qframe QFD75 Manuel utilisateur

SONIQ

SONIQ Qframe QFD72GK Manuel utilisateur

SONIQ

SONIQ F800-AU Manuel utilisateur

Manuels Cadre photo numérique populaires d'autres marques

LENCO

LENCO DF-830 Manuel utilisateur

NIX

NIX Advance X10G Manuel utilisateur

Nextar

Nextar N7S-100 Manuel utilisateur

Sungale

Sungale TD350A Manuel utilisateur

texet

texet DPF-830 Instructions de montage

Philips

Philips SPF2017 Manuel utilisateur

Philips

Philips SPF1327 Manuel utilisateur

Philips

Philips SPF7010/10 Manuel utilisateur

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Manuel utilisateur

ViewSonic

ViewSonic VFM1042-52 Manuel utilisateur

YURAKU

YURAKU YUR.PHOTO 7B4C Manuel utilisateur

Denver

Denver PFF-710WHITE MK2 Manuel utilisateur

Pandigital

Pandigital PAN8000DWPCF1 Manuel utilisateur

Rekam

Rekam Deja View HD-850 Manuel utilisateur

Majestic

Majestic DF 918HD MP3 Manuel utilisateur

ViewSonic

ViewSonic DPF8-CAM Manuel utilisateur

Philips

Philips SPF2527 Manuel utilisateur

Digital Foci

Digital Foci Image Moments IMT-063 Manuel utilisateur