2
Important Safety Instruction
•Read Instructions –All the safety and operating instructions should be read before operating this
equipment. These instructions should be retained for future reference
•Heed Warnings –All warnings on the equipment and in the operating instructions should be
adhered to. All instructions regarding care and operation of this equipment should be followed.
•Power Sources –Equipment should only be connected to the power supply specified in the
operating instructions or as marked on the equipment.
•Grounding or Polarization –Take precautions that the equipment is properly grounded. Take
note that the power supply is fitted in the correct input jack ( marked DC 12V ), and auxiliary units
( external siren and strobe light ) are fitted into the correct external jack points.
•Power-Cord Protection –Keep cable cords and plugs clear of other objects, particularly at the
point where they exit the equipment.
•Cleaning –Clean the equipment by wiping with a soft cloth, ( do not use any abrasive agents or
water ).
•Non-use Periods –Power cords should be unplugged from the outlet when left unused for a long
period of time.
•Object and Liquid Entry –Take care not to drop objects or liquids on any part of the equipment.
•Damage Requiring Service –The alarm should be serviced by a qualified service personnel
when:
-The power-supply cord or the plug has been damaged,or
-Objects have fallen, or liquid has been spilled onto the equipment,or
-The equipment has been exposed to rain,or
-The equipment does not appear to operate normally or exhibits a marked change in
performance,or
-The equipment has been dropped, and/or the enclosure has been damaged.
•Servicing –Do not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to a Qualified Distributor’s Service Personnel.
•System Maintenance –Under normal use your system requires virtually no maintenance other
than regular testing. It is recommended that you test your system once a week, and replace the
batteries at least once every 6 months ( or as needed ).
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR MOISTURE
