With this mode, your house appears to be inhabited during your absence, with the shutters opening and closing at random times.
The times deviate automatically from the weekly program input times within a window of +/- 15 minutes.
Hold down until
(SEC) is displayed.
The CHRONIS IB offers five different operating modes, which can meet all personal requirements by pressing a button.
Security/holiday switching (SEC)
Configurations :
B
Weekly program (▼ 20:00)
The shutters are automatically opened or closed at the input opening and closing times.
❑The factory setting for opening is 06:00 and 20:00 for closing.
❑Different times can be input for each day of the week.The day of the week to which the time input applies is always shown blinking.
Changing the weekly program (if necessary):
1. Hold down until the weekly program (▼ 20:00) is displayed.
2. Press briefly ➜ time blinks.
3. Press briefly ➜ “UP” switching time blinks.
4. Press to select the day of the week you wish to program.You can also select all days of the week (1234567).
5. Set “UP” switching time with
6. Press briefly ➜ “DOWN” switching time blinks.
7. Set “DOWN” switching time with
If required, set the next day with and repeat (3) to (7).
After input press briefly (store) ➜ time display.
If the “UP” or “DOWN” time is turned further than 23:59 with the , the display shows (OFF).
Automatic opening or closing can be deliberately switched off for “UP”and “DOWN”commands on individual days by using the OFF setting.
Basically valid for setting or changing values:
❑Blinking values can be changed
❑Always press SET to terminate and store input values
❑If no input is entered for approximately 20 seconds, the input menu is automatically exited.The settings made up to that point are not stored.
Before setting the time, summer or winter time setting must be carried out. Factory setting is winter time (“W” is shown on
the display).
Initial setting operation :
A
❑From winter time to summer time
1. Press briefly ➜ time blinks.
2. Press for longer than 5 seconds ➜ summer time is set.“S” is shown.
3. Press briefly (store) ➜ time display.
❑From summer time to winter time
1. Press briefly ➜ time blinks.
2. Press for longer than 5 seconds ➜ winter time is set.“W” is shown.
3. Press briefly (store) ➜ time display.
Press briefly ➜ time blinks.
Set time with
Press briefly (store) ➜ time display stops blinking.
SET summer or winter time
SET time
1. Press briefly ➜ date display (if no input within 10 sec., the display
returns to the time)
2. Press briefly ➜ day blinks.
3. Set day with
4. Press briefly ➜ month blinks.
5. Set month with
6. Press briefly ➜ year blinks.
7. Set year with
8. Press briefly (store) ➜ year stops blinking, time display.
The day of the week is set automatically.
The day, month,year selection can also be carried out in the opposite
direction using the button.
