5 USING THE WEBBOX2
Please note: Read Chapter before connecting the Webbox for the first
time.
5.1 Switching the machine on
After the Webbox2 has been connected to the electric socket and to
Internet, switch on the device by pressing the [On] button on the
Webbox2. (This button is the farthest one to the right at the bottom). You
can also use the remote control; the [On] button is at the top on the far
right. When you switch the device on, the [On] indicator light turns green
and within a second you will hear the ‘on’ tone. After about 10 seconds
you will hear a ‘start’ melody.
The Webbox2 will automatically seek a connection to Internet; the yellow
I TER ET indicator light will then light up. The Webbox2 will seek the
most current data and incorporate these into the menu.
You can switch the device off by pressing the [On] button again. The
green and yellow lights will then turn off and you will hear a short ‘off’
tone.
5.2 Pause menu
Regardless of what the Webbox2 is playing, you can always make use of
the so-called ‘Pause menu’ by pressing the volume/pause knob. By
pressing the [Up] and [Down] buttons, you can scroll through this ‘Pause
menu’ to find all sorts of information and options relevant to the
programmes as well as to general settings relating to operation of the
device. See also ‘Annex B: Pause and Reset menu’. You can leave the
‘Pause menu’ by pressing the volume/pause knob again or by pressing
the [Back] button. (Or you can choose ‘Continue playing’). You can also
obtain the 'Information’ in this menu by pressing the [Info] button on your
remote control.
7 © March 2013 Webbox2
