Solution Ozone SSO-O3-SPA01 Manuel utilisateur

SSO-O3-SPA01

SPA O3 System

User Manual

Ver: 2.01

Cered by:

Ozone

1 - Ozone is an extremely powerful oxidizing agent, capable of eecvely oxidizing

bacteria, fungi, microorganisms and viruses.

2 - Ozone is 1,5 mes stronger than chlorine and 3 125 mes faster in inacvang bacteria

and viruses.

3 - Ozone does not change the pH or the alkalinity of the water.

4 - Ozone is 100% natural and aer its acon it is returned to nature in the form of

oxygen.

Applicaon

1 - Eliminates harmful elements from water - Ozone is an oxidizing agent capable of

eecvely oxidizing more than 99% of bacteria, algae, fungi, microorganisms, protozoa

and viruses.

2 - Does not produce toxins avoiding the formaon of organic by-products - Ozone

promotes the oxidaon of organic and non-organic parcles without the formaon of

undesirable by-products, such as chloramines (generated from the reacon of chlorine

with impuries present in water such as tanning, makeup , body creams, urine, sweat and

other secreons).

3 - Removes obsolete odors and smells - Ozone is a powerful oxidizing agent that allows

oxidizing harmful toxic elements and organic odors in water, removing bad smells and

reducing their toxicity without any secondary polluon.

4 - Reduces water consumpon - Ozone improves water quality, keeping it clean and

crystalline for longer, reducing water seedlings.

5 - Does not cause irritaon - The use of ozone in the treatment of SPAs reduces the

risk of skin and eye irritaon, allergies, respiratory problems, ear infecons, and dehydra-

on of the skin and hair that normally occurs with the use of chlorine.

6 - Does not damage bathing suits - The use of ozone does not harm bathing suits

(discoloraon and fragility of the elascs.

Specicaons

..EN

SSO-O3-SPA01 - User Manual (EN)

Model SSO-O3-SPA01

Ozone Output 100mg/h

Gas Supply Ambient Air

Water Volume ≤ 10 m3

Fuse 100 mA

Rated Power ≤ 12W

Voltage 240 V AC

Size (LxWxD) mm 200 x 110 x 65

Weight (kg) 0,60

Table 1— Specicaons

Merely illustrave images.

Ver2/01-Ver.02

Equipment Structure:

Included:

 1 Ozone Generator SSO-O3-SPA01

 1 Silicone Tube

 1 Check Valve

 1 Venturi ½”

 User Manual

 Wall-mouted screws

Installaon and Operaon Instrucons

1.1 - Remove the equipment and the silicone tube from the box.

1.2 - Turn o power to SPA. Be sure the electrical power is shut OFF at the main circuit

breaker before installing the SSO-O3-SPA01.

1.3 - Find the ozone generator installaon ng, on the wall of the equipment

compartment. Install the SSO-O3-SPA01 at the ozone generator installaon ng, use the

mounng screws and fasten the unit to the wall.

Note: Be cauons of the mounng locaon as to not cause the screws to penetrate any

plumbing. The SSO-O3-SPA01 must be mounted indoors or sheltered, under a cover, from

natural elements (rain, sun, ...). Mount the SSO-O3-SPA01 so that is inaccessible to anyone

in the SPA.

1.4 - The SSO-O3-SPA01 must be installed horizontally, with the front image on the right

posion and the Ozone Outlet turned to the le/down side (see image 2). Use both

mounng anges and install the equipment as high as possible with the protected

equipment area.

1.5 - Plumbing - for an opmal dissoluon of ozone into the SPA Water, install the SSO-O3-

SPA01 mixing system in the Water circulaon lina as shown in Image 2:

1.5.1 - Connect the addional silicone tube (supplied with the Ozone Generator) to the

check valve on the SSO-O3-SPA01.

..EN

SSO-O3-SPA01 - User Manual (EN)

Merely illustrave images.

Ver2/01-Ver.02

Image 1 - Equipment Structure

Power Cable

Ozone Generator

Check Valve

Fuse

Ozone Outlet

1.5.2 - Run tubing to the venturi (supplied with the Ozone Generator) or to an

appropriate vacuum source.

1.5.2.1 - If the ozone generator is installed above the SPA Water Line, tubing may be

run directly to the venturi or to an appropriate vacuum source.

1.5.2.2 - If the ozone generator is installed below the SPA Water Line, run tubing to a

point above the water line and back down (loop) to the venturi/vacuum source.

1.5.3 - Secure all tubing connecons with hose clamps.

Note: For circulaon systems dierent from the one shown in image 2, contact your

SPA supplier for proper plug conguraon.

1.6 - Electrical installaon (see image 3):

1.6.1 - Verify there is no power to the SPA and connect the SSO-O3-SPA01 power cord

into the mang connector(s) on the SPA Control Box.

1.6.2 - Where possible, route the SSO-O3-SPA01 power cord away from other electrical

lines. Avoid roung the power cord parallel to any low-voltage signal wires.

..EN

SSO-O3-SPA01 - User Manual (EN)

Image 2 - Installaon

Merely illustrave images.

Ver2/01-Ver.02

WARNING:

To reduce the risk of electrical shock, if the power cord is damaged, replace the

enre unit immediately.

..EN

SSO-O3-SPA01 - User Manual (EN)

1.7 - Operaon:

1.7.1 - With the SPA lled to the proper level, run the SPA Controller through several

cycles.

1.7.2 - Check for and correct any leaks in the ozone tubing.

1.7.3 - Check that the Ozone Generator is working properly. Note that bubbles are being

placed into the SPA via heater return and you will noce a faint scent that resembles a

rain storm.

WARNING:

Do not breathe ozone directly. If there is any leakage of ozone in the system, turn it o

immediately and leave the space and only return aer 30 minutes (so that all the ozone in

the air is completely dissipated). According to OSHA standards, you should not be exposed

for more than 0.1 ppm for periods of 8 hours / day.

Image 3 - Electrical Diagram

WARNING:

The Ozone Generator works at high voltage and should only be opened by Soluon Ozone®

Technicians. Before carrying out any work on the Pool Circulaon System, make sure that

the electrical supply to the Ozone Generator is turned o.

Merely illustrave images.

Ver2/01-Ver.02

Maintenance

2.1 - To ensure the proper funconing of the system, it is recommended to carry out periodic

maintenance on the Ozone Generator.

2.2 - Regularly inspect ozone supply tubing for cracks or wear. Make sure that is no water

present between the check valve and ozone generator - this indicates check valve failure. In

this case, replace the ozone check valve immediately.

Cauons

3.1 - Follow the instrucons in this Manual carefully.

3.2 - Ensure that the equipment is placed in a locaon where it is at a level above the

maximum SPA water level. Use the xing brackets and x the equipment according this

manual.

3.3 - You should not put the system into operaon if the ozone generator is not well

supported. Ensure the installaon of the equipment in a safe place, which protects it from

the weather, splashing water or excessive heat. When not in use, store the equipment in a

dry place at room temperature. Keep the equipment away from sources of water and/or

moisture.

3.4 - Do not breathe ozone directly. Breathing ozone directly can be toxic, OSHA regulaons

must be respected. Avoid sning or breathing directly over the equipment's air outlet.

3.5 - Do not remove the screws or security seals from the equipment, in addion to violang

and voiding the warranty of the same, there is a risk of electric shock. Remember that this

equipment operates at high voltage even when disconnected from the power supply.

Maintenance Plan Biweekly Monthly Semiannual Annual

Check the Fan Dust Filter X

Check the Pressure in the Circulaon and

Mixing System X

Perform the O3 Generator Checkout by

Soluon Ozone® Technicians X

Table 2 - Maintenance Plan

SSO-O3-##GPOOL01 - User Manual (EN)

..EN

Merely illustrave images.

Ver2/01-Ver.02

WARNING:

If you noce any ozone leakage, turn OFF the equipment's power supply immediately, leave

the space and only return aer 30 minutes, so that all the ozone in the air is completely

dissipated.

3.6 - Keep the equipment out of the reach of children.

3.7 - Do not cover the equipment during its operaon.

3.8 - Do not insert any objects through the ozone outlet grilles, as this may cause equipment

malfuncons or short-circuits.

3.9 - Clean the equipment with a clean, dry cloth. Do not use abrasive products.

3.10 - Do not open the equipment - High Voltage inside.

Problems / Faults

Warranty

4.1 - This equipment has a free 2 years warranty period, if the equipment fails in normal use,

according to the manual instrucons (determined by the company). To acvate it, you must

present the invoice and the warranty card.

4.2 - The warranty applies to the Ozone Generator System. Consumables such are not

covered by the warranty (check valve, silicone tube, venturi).

4.3 - During the warranty period, the following condions are not covered:

- Does not present the warranty card and invoice;

- Failures and damages caused by improper use or improper repairs;

- Failures and damages caused by transport and fall;

- Failures and damages caused by other external factors, natural disasters or other human

factors;

- Failures and damage caused by water or other types of soluons on the equipment;

- Failures and damages caused by the use of energy or voltage other than those specied;

- Failures by dierent use from what is specied in this manual;

- Damaged or missing Warranty Seal;

- Signs of aempng to open the equipment.

Problem / Failure Possible Causes To DO

The Ozone Generator

does not turn on

Generator without power

supply Check that the power is working

properly.

Blown Generator Fuse Replace the fuse.

SPA without ozone

Damaged check valve Replace the check valve.

Silicone tubing damaged with

ozone leakage Replace system silicone tubing.

Table 3 - Fault Idencaon

SSO-O3-SPA01 - User Manual (EN)

..EN

Merely illustrave images.

Ver2/01-Ver.02

Warranty Card

www.soluonozone.com

info@soluonozone.com

Full name Phone Number

Address

Invoice nr. Purchase Date

Maintenance Record

Date of Maintenance

Analysis

Result

Clerk Signature

Table des matières

Autres manuels Solution Ozone Générateur portable

Solution Ozone

Solution Ozone SSO-O3-CNN0 Series Manuel utilisateur

Manuels Générateur portable populaires d'autres marques

Kohler

Kohler 20EORZ Mode d’emploi

Powerhorse

Powerhorse 83171 Manuel utilisateur

HURST

HURST ML-630-SI Manuel utilisateur

ETQ

ETQ TG4000 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton 40265 Guide de configuration

ConMed

ConMed 7550 Manuel utilisateur

Owon

Owon Waveform Generator Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

Power Stroke

Power Stroke PS906025 Manuel utilisateur

Firefly

Firefly Cygnus CYG2400/460/24 Manuel utilisateur

Draper

Draper PG950S Mise à jour du firmware

PowerBoss

PowerBoss PowerBoss Manuel utilisateur

SDMO

SDMO SH 4000 Manuel utilisateur

EINHELL

EINHELL STE 5500 Manuel utilisateur

Wanco

Wanco WI3000P Manuel utilisateur

Full Boar

Full Boar FBT-3300 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments ASG Manuel utilisateur

Westinghouse

Westinghouse WH1000i Series Manuel utilisateur