1. Never use this device for any other
purpose or in any way other than that
described in the present manual,
otherwise the protection provided by
the device may be impaired.
2. Your finger or any other part of your
body must not touch the measuring
probes. Do not carry out
measurements with wet hands.
3. Use additional protective equipment if
you measure in areas of danger to life
and health.
4. Do not use the device if its body or
measuring probes are damaged. Do
not use in humid environment.
5. Before each measurement, check the
function of the main switch and make
sure it is set correctly.
6. When making a current measurement,
make sure the circuit is not live so that
you can connect the measuring
probes.
7. Do not carry out resistance and diode
measurements or circuit continuity
testing on a live circuit.
8. Do not exceed the selected range of
measured values on the rotary switch.
