Solem WF Series Manuel utilisateur

customer[email protected]

+33 467 592 425

www.solem.fr

ES P40

IT P60

SOLEM

FR P01

EN P20

WF-MB – Wi-Fi/Radio Relay

QUICK INSTALLATION GUIDE

P-20

INTRODUCTION

WF products are used to control the watering and / or garden lighng from

a smartphone or tablet. The watering and lighng programs are transmied in

modules from the SolemWF free applicaon available on the App Store or

Google Play (Play Store). The user must rst establish a connecon between

their smartphone or tablet and the WF product..

1 - CONNEXION VIA BOX

The connexion can be done through a router or a box. (Step ❸ for sengs in “

Client mode via a router”)

This mode is “ recommended “ because it allows you to communicate

with one or more WF Solem modules by simply using the exisng home

network . This operang mode will also give you the possibility to monitor a

module remotely via Internet.

2 - DIRECT MODE CONNEXION

If you don’t have a router, the connexion can be established directly.

(Step ❹ seng in direct mode called ‘’ independant network mode’’)

This mode allows the use of the applicaon SolemWF directly with the product

without the need of a router

Now you can dowload the applicaon and choose your mode,

- Download the SolemWF App, ( See Step ❶ )

- Conguring the Wi-Fi network, ( See Step ❷ )

- Switch to the Step ❸ or ❹ according to your Choice

P-21

❶ - DOWNLOAD THE SolemWF App

Make sure your device is connected to Internet (Wi-Fi or 3G Minimum), then

download the SolemWF App on the App Store or Google Play (Play Store)

❷ - CONFIGURATION DU RESEAU Wi-Fi

When you power the irrigaon Wi-Fi module, it starts in install mode. In less than

30 seconds, the network module will be visible in the sengs of your wireless

smartphone or tablet.

Select it from the list

The idencaon number is the code printed on the label at the back of the

product: “ Default SSID : ‘’WF MB ……’’

Quit the Wi-Fi sengs of your smartphone or tablet and start the SolemWF App.

Go to the paragraph corresponding to the selected mode ❸ or ❹.

P-22

❸ CONNECT THROUGH A ROUTER ‘’Client mode via a router’’

You can connect one or more products on your internet router.

Your network product will be visible and programmable enrely

from your Smartphone or Tablet just by connecng on your Router.

A / Apple iOS Smartphone or Tablet Version.

1- Connecon of the product to a router.

Once you have completed step ❷, open the SolemWF App. One of those 2

pages will appear:

P-23

First me you connect

to a WF or BL module

Select the product icone

If you have alredy connected

WF or BL modules

Press on “+” and then on the product icone

Press on the product idencaon number in yellow. This product code is the

default SSID number printed on the back of the module.

Select : “ congurate as a client of another Wi-Fi network’’

P-24

See the Default SSID number

Select your router network. In this

example, we choose “ solem visiteurs”.

Enter the router network password Send informaons to the product

Exit the App, wait unl the LED of the product turns green.

P-25

As soon as the product LED will appear in green, your phone will automacally

reconnect to the router. If the phone does not reconnect to the router go back to

the sengs to reacvate your Wi-Fi connecon (See screens below).

In this example, we connect to

‘’Solem-visiteurs’’.

Enter the router network password

P-26

The smartphone is connected to

your router

Connect to your route

2 - Internet funcon access acvaon’’

The ‘’access internet’’ funcon is accessible only when connected to your router.

On the screen shot above, the products listed

under ‘’Local’’ are directly connected to the router.

The products listed under the Site ‘’Olivier’’ are

connected via internet.

The products listed as ‘’disconnected’’ are no longer

accessible eather directly via the router or remotely

via internet

Open the App and

enter the product

Acvate it

P-27

P-28

3 - Assign the product to a “ site”

This will allow you to access the module via Internet.

Select the Internet access and download the

instrucons to the module.

To check that the Internet mode is acvated,

desacvate the WiFi in the sengs of your phone.

Go back to the App . Your product will appear in

the list of products connected. This requires a 3G

or 4G connecon.

▶ ▶

B/ Android version .

1- Connecon of the product to a router

Once step ❷, is completed, open SolemWF,. One or the other of the 2 following

pages will appear:

P-29

First me you connect

a WF or a BL module

Select the product icone corresponding to

your product.

You have already connected

a WF or BL module

1 – press on (Sigle 3 points)

2- press on ‘’+’’

3 – Select your product Icone

Ce manuel convient aux modèles suivants

Autres manuels Solem Relais

Solem

Solem LR-MB Manuel utilisateur

Manuels Relais populaires d'autres marques

Shelly

Shelly Pro Series Manuel utilisateur

GE MVAX 11 Manuel utilisateur

ABB

ABB RELION REF615R Manuel utilisateur

Pilz

Pilz PNOZ X10 Manuel du propriétaire

ABB

ABB SPAJ 142 C Manuel de la liste des pièces

Kemo Electronic

Kemo Electronic B197 Manuel utilisateur

Seg

Seg MRM3 Manuel utilisateur

Basler

Basler BE1-700C Manuel utilisateur

CD Automation

CD Automation REVEX 2PH 280A Manuel utilisateur

Ruelco

Ruelco 1S04 Manuel utilisateur

Basler

Basler V3E Z1P B2C1F Manuel utilisateur

Doepke

Doepke Dupline DSM 2 Manuel utilisateur

Siemens

Siemens SIRIUS 3RT1966-4D Manuel utilisateur

GE DGP Manuel utilisateur

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuel utilisateur

Siemens

Siemens SIPROTEC 4 Manuel utilisateur

Siemens

Siemens BD2-AK03X/FS Series Manuel utilisateur

Leuze

Leuze MSI-SR5B Manuel utilisateur