Sola Vector 50 Manuel utilisateur
HU
BG
Gebrauchsanweisung
Operating instructions
Manuel d’instructions
Instruzioni d‘uso
Instrucciones de uso
Gebruiksaanwijzing
Руководство по применению
Instrukcja obsługi
Eksploatacijos instrukcija
Lietošanas instrukcija
Uputstvo za upotrebu
Návod k použití
Manual de utilizare
Ръководство за употреба
Használati útmutató
VECTOR 50
2
EN
Included in delivery with the Vector50
1. Laser distance measurement instrument
2. Belt pouch
3. AAA batteries
1.
2.
3.
3
EN
2.1 Function buttons
2.1 Display
6.
1.
4.
3.
2.
5.
7.
4.
2.
3.
6.
5.
1.
7.
4
EN
Operating manual
Vector 50 laser distance meter (original version)
About this manual
Congratulations on the purchase of your new Vector 50! You have acquired a SOLA measurement
instrument, which can make your work easier, faster and more precise.
To utilize the complete functionality range of this measurement instrument, and to ensure a safe
operation, please observe the following instructions:
• Please read this operating manual before commissioning the device.
• Always keep the operating manual near the device.
• Only hand over the device to other persons together with the operating manual.
• Never render the attached warning signs unreadable.
Contents
1. General information
2. Description
3. Technical data
4. Safety instructions
5. Laser safety / classication
6. Getting Started
7. Operation
8. Maintenance, storage and transportation
9. Delivery contents and accessories
10. Troubleshooting
11. Disposal
12. Manufacturer’s guarantee
13. EC conformity declaration
5
EN
1.1 Signal words and their meaning
DANGER
For an imminent danger that could lead to serious
injury or death.
WARNING
For a possibly dangerous situation that could lead
to serious injury or death.
CAUTION
For a possibly dangerous situation that could lead
to slight injury or property damage.
NOTE
For application notes and other useful information.
1.2 Pictograms and other information
1.2.1 Warning signs
Warning of dangers in general
1. General information
1.2.2 Symbols
Read the operating
manual before use
Batteries and devices must not be
disposed of with household waste
Do not throw batteries into the re
Warning signs on battery Do not
heat the battery above 60 °C.
Class 2 laser device
Do not look into the laser beam!
6
EN
2. Description
2.3 Intended use
This instrument is designed to measure distances. The measured value, setting, and instrument status
can be viewed on the display.
A laser beam is emitted and then sent back to the laser distance measurement instrument from a
reected surface. This is used to calculate the distance. The range depends on the model of the laser
distance measurement instrument, on reectivity, and on the properties of the reective surface.
2.1 Function Buttons
1 Vial
2 Display
3 ON/Measure button
4 Add, subtract/signal
5 Function button
6 OFF/Delete button
7 Belt holder
2.2 Display
1 Measured values
2 Mathematical sign
3 Surface, volume, indirect measurement
4 Measured value display
5 Battery status
6 Measurement edge
7 Unit
7
EN
3. Technical data
3.1 General
Measurement range 0.15–50m*
Accuracy ± 1.5mm**
Protection rating IP 42
Laser class 2
Laser type 650nm, < 1mW
Laser auto-shutdown 45s
Instrument auto-shutdown 180s
Operating duration up to 5000 measurements***
Battery type 2 x AAA 1.5V
Operating temperature 0–40°C
Storage temperature -20–60°C
Dimensions (H x W x D) 105 x 47 x 27
Weight with batteries 85g
*When measuring a target with 100% reectivity (e.g. a painted white wall), with low backlight and an operating temperature of 25°C.
Under unfavorable conditions, e.g direct sunlight, non-reective surfaces or measurements on glass or shiny surfaces, the inaccuracy can
increase and measuring errors can therefore occur.
The reach of the visible laserpoint always depends on the ambient conditions.
**This degree of precision applies when measuring distances of between 0.2 to 10 m. When measuring distances of between 10 m and
40 m, the maximum tolerance may decrease by 0.1 mm/m.
***When operated at room temperature.
3.2 Functions
Individual measurement
Min/max measurement
Continuous measurement
Area measurement
Volume measurement
Indirect 2-point measurement
Addition
Subtraction
3-part back-lit display
8
EN
8
4. Safety instructions
4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for the safe delivery condition of the product, including the operating manual and the
original accessories.
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of his
personnel, their training and the operational safety of the product.
The operator understands the safety information which is stated on the product and
the instructions in the operating manual.
The operator shall comply with the standard local regulations relating to safety and accident preven-
tion regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits
(see Chapter 3/Technical data)
.
Use under extreme temperature fluctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The VECTOR 50 is suitable for continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
Inform the local safety authorities and safety experts before working in hazardous environments, in
close proximity to electrical installations or similar surroundings.
9
EN
4.4 Usage Hazards
4.4.1 General
WARNING
Missing or incomplete instructions may result in improper or incorrect use. This can cause
accidents with serious damage to persons, property,
assets and the environment.
Follow the manufacturer’s and operator’s safety instructions.
Protect equipment and accessories from being accessed by children.
WARNING
Blinding by laser radiation can indirectly lead to serious accidents,
especially for people who are driving a vehicle or operating machinery.
Do not look into the laser beam.
Do not set up the laser beam and the laser plane at eye level or aim at people.
CAUTION
A fall, longer storage, transportation or other mechanical eects can lead to erroneous meas-
urement results. Check the unit for damage before use. Do not use damaged equipment.
Repairs must only be performed by SOLA.
4.4.2 Batteries
DANGER
Mechanical damage can cause batteries to leak, explode or catch fire or trigger the release of
toxic substances.
Batteries and rechargeable batteries must not be opened or exposed to mechanical loads.
Repairs must only be performed by SOLA.
10
EN
WARNING
High ambient temperatures and immersion into liquids can cause batteries to leak,
explode or catch fire or trigger the release of toxic substances.
Protect batteries and rechargeable batteries from mechanical damage during transport.
Do not overheat batteries and rechargeable batteries or expose them to fire.
Avoid the ingress of moisture into batteries and rechargeable batteries.
Do not use damaged batteries or rechargeable batteries. Perform a proper disposal
(see Chapter 11/Disposal)
.
WARNING
A short-circuiting or unintended use can cause batteries to overheat and create an injury or fire
hazard.
Do not transport or store batteries in the pockets of garments.
Do not bring the battery contacts in contact with jewellery, keys, or other electrically conductive
objects.
Do not charge the batteries.
Do not discharge the batteries through short-circuiting.
Do not solder the batteries in the device.
Do not mix old and new batteries, and do not mix batteries from dierent manufacturers or with a
diering type designation.
WARNING
If disposed of improperly third parties can possibly be seriously injured and the environment
polluted. Burning plastic components generates toxic fumes which may impair health. Batter-
ies/rechargeable batteries may explode if they are damaged or heated excessively, and thereby
cause poisoning, burning, corrosion or environmental contamination. If disposed of negligently
unauthorized persons are able to use the product improperly.
The product must not be disposed of together with household waste. Dispose of the device and
accessories properly
(see Chapter 11/Disposal)
.
Protect the product against access by unauthorized persons at all times, and especially children.
Table des matières
Autres manuels Sola Instrument analytique
Manuels Instrument analytique populaires d'autres marques
EXTOL PREMIUM
EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation
RIDGID
RIDGID SeeSnake Compact Manuel utilisateur
Teledyne
Teledyne 3000PA Manuel utilisateur
YDLIDAR
YDLIDAR TIA Manuel utilisateur
Olympus
Olympus IPLEX FX Series Manuel utilisateur
Bosch
Bosch GLM 50 C Professional Manuel utilisateur
