Socket Go Wi-Fi! P320 Manuel utilisateur

User Manual

Go Wi-Fi!®P320/P320X

802.11a/b/g WLAN SDIO Card

____________________________________________________________________________________________________________

April 2009 Document # 6410-00314 A

Socket, the Socket logo and Go Wi-Fi! are trademarks or registered trademarks of Socket Mobile,

Inc. Wi-Fi® is a registered trademark of the Wi-Fi Alliance. All other brand and product names are

trademarks of their respective holders.

Reproduction of the contents of this manual without the permission of Socket Mobile is expressly

prohibited. Please be aware that the products described in this manual may change without

notice.

Feel free to contact Socket Mobile at:

Socket Mobile, Inc.

39700 Eureka Drive

Newark, CA 94560-4808

USA

Other than the above, Socket Mobile can assume no responsibility for anything resulting from the

application of information contained in this manual. Please refrain from any applications of the

Socket Mobile product that are not described in the user manual. Please refrain from

disassembling the Socket Go Wi-Fi! P320 and P320X SDIO cards. Disassembly will void the

product warranty.

You can track new product releases, software updates and technical bulletins by visiting the

Socket Mobile website at: http://www.socketmobile.com

Federal Communication Commission Interference

Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Testing was performed on Notebook PC with antennas at 5 mm spacing. The maximum SAR

value is: 0.476 W/kg.

Table of Contents

Copyright Notice................................................................................................................. 2

Federal Communication Commission Interference Statement........................................... 3

1. ................................................................................................................. 5Introduction

1.1 ...................................................................................... 5Key Features Supported

1.2 .......................................................................................... 5System Requirements

2. ............................................................................... 6Installing the P320/P320X Driver

2.1 ........................................... 6Installing the driver CAB file with a Memory Card

2.2 .......................................... 6Installing the driver with Synchronization Software

3. ........................................................................................ 7Create Access Point Profile

4. ..................................................................................... 10Connect to the Access Point

5. ............................................................. 11Check IP Address after WLAN Connection

6. ..................................................................................................... 12Technical Support

6.1 .............................................................................................. 12Limited Warranty

6.2 .............................................................................. 13Limited Software Warranty

6.3 ......................................................................................................... 14Disclaimer

6.4 ............................................................. 14Regulatory Compliance for Go Wi-Fi!

1. Introduction

Thank you for purchasing the Socket Go Wi-Fi! P320/P320X 802.11a/b/g SDIO WLAN card. This

User Manual provides instructions for using the P320/P320X driver on ARMV4I processor based

handheld devices running Windows Mobile 5 or Windows Mobile 6.

1.1 Key Features Supported

The provided Go Wi-Fi! P320/P320X driver has the following features and security protocols:

Support 802.11 a/b/g

Works with Microsoft Wireless Zero Config (WZC)

Supports Windows Mobile 5.0 for Pocket PC or Windows Mobile 6.0 Classic

Supports ARMV4I processor type

Supports WEP 64/128-bit encryption

Supports WPA/WPA2 – pre-shared key (PSK) and enterprise versions, which support

TKIP and AES-CCMP encryption types

1.2 System Requirements

Mobile devices with:

Windows Mobile 5.0 for Pocket PC or Windows Mobile 6.0 Classic

ARMV4I processor type

An SDIO slot

2. Installing the P320/P320X Driver

2.1 Installing the driver CAB file with a Memory Card

1. Copy the driver CAB file from the Driver CD onto a memory card. Alternatively, download

the driver CAB file online

2. Insert the memory card into the device.

3. Use File Explorer to copy the CAB file to the device, then navigate to the CAB file

4. Tap on the CAB file to install it. Follow the instructions to complete the installation

2.2 Installing the driver with Synchronization Software

1. Use a serial/USB connection cable or cradle to make an active connection between your

device and a host PC

If your host computer is running Windows Vista, use the Windows Mobile Device Center.

Download it from the Microsoft website

If your host computer is running Windows 2000/XP,

ouse ActiveSync 4.5 or greater for Windows Mobile 6.0

ouse ActiveSync 4.0 or greater for Windows Mobile 5.0

2. Insert the Driver CD into your host PC. Alternatively, download the driver EXE file online

and save on the local PC

3. Use My Computer or Windows Explorer to access the CD-ROM drive or the local PC

drive. Click on the Socket_P320_x.x.x.x.exe (e.g.: Socket_P320_3.1.9.0.exe for the

driver version 3.1.9.0). It will launch the InstallShield Wizard as below.

4. Follow the InstallShield Wizard steps to complete the driver installation

3. Create Access Point Profile

1. Insert the Go Wi-Fi! P320/P320X card into the SDIO slot of your device. Once the WLAN

card is initialized and the driver is loaded, a radio tower icon shows up at the top bar.

2. Tap on the tower icon, then on the “Settings” on the pop-up Connectivity window, it will

take you to the following screen.

3. Click on “Wi-Fi”, it will show the list of the available WLAN access points.

4. Select the access point that you want to connect to (in this example: “atheros_test”). Click

on the menu item “Connect”. If it is the first time connecting to this access point, it will

create a new profile. Otherwise, it will start the WLAN connection

If it is the first time connecting to the access point, it will bring you to the following profile creation

screens.

At the first screen next, you can enter “Network name”. The access point name is used as the

default network name. Follow the “Next” soft key to move to the next screen.

Next, select the authentication and encryption methods corresponding to the selected access

point. Then, enter the right network key. Follow the “Next” soft key to move to the next screen

until “Finish” to complete the profile creation.

4. Connect to the Access Point

Once you finish the profile creation or you clicked “Connect” on an access point with profile

already created, the PDA starts to try connecting to the WLAN access point you selected.

The screen below shows that the device is connected to the access point.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Socket Carte réseau

Socket

Socket Low Power Wireless LAN Card Manuel utilisateur

Socket

Socket WL6207 Manuel utilisateur

Socket

Socket CF Card Manuel utilisateur

Socket

Socket 10/100 Ethernet CF Card Manuel utilisateur

Socket

Socket Wireless LAN CF Card 11Mbps Manuel utilisateur

Socket

Socket SDIO 56K Manuel utilisateur

Socket

Socket Rugged CF 10/100 Card Manuel utilisateur

Socket

Socket Go Wi-Fi! P322 Manuel utilisateur

Socket

Socket 10/100 Ethernet CF Card Manuel utilisateur

Socket

Socket 10/100 Ethernet CF Card Manuel utilisateur

Socket

Socket Low Power Wireless LAN Card Manuel utilisateur

Socket

Socket 10/100 Ethernet CF Card Manuel utilisateur

Socket

Socket SDIO 56K Manuel utilisateur

Socket

Socket Go Wi-Fi! E300 Manuel utilisateur

Socket

Socket CompactFlash 56K Modem Card Manuel utilisateur

Socket

Socket Low Power Wireless LAN Card Manuel utilisateur

Socket

Socket Bluetooth Connection Kit Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur