Snooper S1000 Manuel utilisateur

1 • UK

Quick Start Guide

Kurzanleitung

Résumé du mode d’emploi

Guía de inicio rápido

S1000

2 • UK

3 • UK

QUICK START GUIDE • UK

CONTENTS

Page 4 Start Up

Installing the SD Card

Page 5 Charging the Internal Battery

Page 6 Powering Ventura using the Built-in Battery

Page 7 Installing Ventura using the Windscreen

Suction Cup bracket

Page 8 Operating Instructions

Starting Up

Easy Set Up

Screen Settings

Page 10 Brightness & Volume Control

Page 11 Setting up Ventura

Page 12 Quick Start Guide to Navigation

Page 14 Quick Menu

Page 15 Using ACSI campsite search

Using the Multi-route function

Page 18 System Security Code

Page 19 System Requirements and Software Installation

Page 20 Downloading the AURATM Camera Database

Page 22 Accessories & Price List

Page 23 Vehicle Speciﬁc Professional Mounting Brackets

2 • UK

3 • UK

Restrictions

Height

Width

Length

Weight

No trailers

Warning

Steep road up ahead

Steep road down ahead

Tight bend ahead

Side winds

QUICK START GUIDE

Ventura has been designed to route your vehicle safely and legally, avoiding hazards

and legal restrictions such as low bridges and roads that are unsuitable for use by

larger vehicles. Ventura will create safe routes for you based on the attributes of your

vehicle and will alert you to any hazards if you should accidentally turn oﬀ that route for

any reason. However Ventura will also alert you to hazards if it is used without a route

programmed to ensure your chosen route is a safe one.

These are the hazards and restrictions Ventura will route you around and give you

advanced warning of:

4 • UK

5 • UK

To utilise the AURA™ Camera database you will need to register your Ventura and

perform a download. Please refer to‘Registering your Ventura’,‘System Requirements

and Software Installation’ later in this Quick Start Guide for further information.

Start Up

1. Installing the SD Card

Before using Ventura, you will need to install the SD Card included with the device. The

SD Card comes complete with a digital map of Western Europe and is also where the

AURATM camera database is stored if you choose to subscribe and download it.

Start by moving the ‘ON OFF RESET’switch located on the back of the unit to the ‘ON’

position, then remove the SD card from its packaging and insert it into the SD Card slot as

indicated. Switch on the device by pressing the standby power button located on the top

of the unit. for 2 seconds. Ventura will automatically synchronise with the SD Card. Once

the synchronisation is completed, the SD Card will not function with any other device.

Your Ventura is now ready to navigate and the camera database can be downloaded if

necessary.

Please note that if the unit does not activate when you press the standby power

button it may require charging. Refer

to the section ‘Charging the internal

battery’later in this guide.

SD Card

4 • UK

5 • UK

2. Charging the internal battery

Although Ventura can be charged using the

cigarette lighter in your vehicle, a complete

charge is more easily achieved by using the

USB mains charger included. When new, the

battery in your Ventura is approximately 20%

charged.

To charge the unit fully, move the ‘ON

OFF RESET’switch to the‘ON’position and

connect the USB mains charger as indicated

in the picture on the right. The battery

will take approximately 3 hours to charge.

Once fully charged the battery will last

approximately 3 hrs during normal use.

Note: The new battery’s full performance is

only achieved after two or three complete

charges and discharges.

CAUTION

THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED WITH AN

UNAPPROVED TYPE. USING THE WRONG TYPE OF BATTERY MAY DAMAGE

YOUR UNIT AND INVALIDATE YOUR WARRANTY. ONLY SNOOPER AUTHORISED

PERSONNEL SHOULD REPLACE THE BATTERY. PLEASE DISPOSE OF USED BATTERIES

ACCORDING TO LOCAL WASTE MANAGEMENT RULES AND REGULATIONS.

FURTHER INFORMATION CAN BE FOUND IN THE USER MANUAL.

Plug the charger into a

240V AC mains socket

Plug the USB charger

cable into the USB

socket on the Ventura

6 • UK

7 • UK

3. Powering Ventura using the built-in battery

Once Ventura is fully charged, it is ready for use. Move the ‘ON OFF RESET’ switch to the

‘ON’position and press the standby/power switch on the top of the unit to switch on the

device.

WARNING

PLEASE DO NOT USE OR LEAVE THE VENTURA IN EITHER WET OR HUMID

CONDITIONS, OR IN EXTREME TEMPERATURES, AS THIS COULD PERMANENTLY

DAMAGE THE UNIT AND THE BATTERY. WHEN NOT IN USE DO NOT LEAVE THE UNIT

ATTACHED TO THE WINDSCREEN, ESPECIALLY WHEN THE WEATHER IS WARM, TO

AVOID DAMAGE TO THE UNIT AND ALSO REDUCE THE RISK OF THEFT

WARNING

THE DEVICE MAY RESTART IF EXPOSED TO STATIC ELECTRICITY, PLEASE AVOID

TOUCHING THE USB SOCKET ON THE SIDE OF THE UNIT.

Standby / Power

switch

6 • UK

7 • UK

4. Installing Ventura using the Windscreen Suction Cup bracket

You can mount your Ventura to the inside of your vehicles windscreen using the

windscreen bracket provided.

Clean the area where you wish to position

the bracket thoroughly with a good quality

glass cleaner. This allows a more secure seal

on the windscreen.

Place the suction cup and bracket on

the windscreen and push the locking

lever towards the windscreen to secure

the bracket.

Adjust the angle of the bracket so that

when the unit is attached to it you can

view the display and operate the controls

safely.

Position Ventura onto the bracket, by

inserting the bottom of the S1000 ﬁrst

and ﬁnally clipping the top of the bracket

into the slot on the back of the unit.

To remove Ventura simply unclip the unit,

by pushing the top of the bracket and taking

the unit from the holder.

Ventura can be powered directly either

from the internal battery if it is fully

charged or powered from the cigarette

lighter socket. To use the cigarette lighter

socket, plug the USB plug on one

end of the power cable into the power

socket on the side of Ventura and plug

the larger plug into the cigarette

lighter socket of your vehicle.

Please Note: Only use the cigarette lighter power cable provided with Ventura.

Ventura operates on 5V and using any other cigarette lighter power cable will

damage your device and void the warranty.

Bracket Adjuster

Locking Lever

8 • UK

9 • UK

Operating Instructions

1. Starting Up

Once you have synchronised the SD Card it is time to perform the ﬁrst Start Up.

First make sure your vehicle is parked in as open a space as possible, clear of tall

trees and buildings so that the built in GPS antenna has a clear view of the sky above.

Next, switch the unit on by moving the‘ON OFF RESET’switch located on the back

of the unit to the‘ON’position, then press the standby power switch on the top of the

unit.

Whilst the Ventura software is loading, a start-up display will be shown for just a few

seconds and then an‘Information Screen’will be displayed. Press the ‘I Agree’ button

and the screen will display a section of a map.

Ventura needs to acquire a minimum of four satellites in order to work. Once this has

been achieved Ventura will ascertain your position and this will be indicated by a green

arrow icon on the on-screen map and the GPS signal strength will be shown to the

bottom right hand corner of the display. Your Ventura is now ready to navigate.

As the GPS engine and antenna have never been used before, the ﬁrst ‘Cold’ start

could take anywhere from 15 – 30 minutes to establish a satellite connection. Once

initialised, subsequent start ups will take less time and eventually should take only

a matter of minutes.

2. Easy Set Up

Screen settings - There are a number of map views or diﬀerent types of information that

can be displayed on the screen at any one time:-

3D 2D North

8 • UK

9 • UK

To modify the information shown access the Menu by simply touching Ventura in the

centre of the screen with your ﬁnger and then press the‘Conﬁgure’ button.

Next press the icon where you will see the list of options

89 MILES

0:33LEFT 20:33PM

NW HOLLOWAY ROAD

Current time or vehicle speed

Direction and name of road

Estimated journey time or Estimated time of arrival

Distance to destination

GPS Signal strength Battery status

10 • UK

11 • UK

To change a setting press it with your ﬁnger and a list of the options available will be

shown next to a tick box. Simply press the tick box to indicate which option you would

like to choose.

Press‘OK’at the bottom of the screen. Your chosen settings will now be saved and will

appear on the screen each time you use your Ventura. If you want to switch between

your Current Speed and the Atomic Clock or the Estimated Time of Arrival and the Time

to Destination during your journey simply touch the LCD screen where either piece of

information is displayed and the unit will display the alternative setting and vice versa.

However, each time you switch on the device the original setting will be displayed.

Brightness and Volume Control - Both the volume and screen brightness can be

adjusted within the‘Conﬁgure’ Menu. To set either function touch the screen in the centre

with your ﬁnger and then press the ‘Conﬁgure’button. The screen will then display a

number of diﬀerent icons.

Brightness Control - Press the icon. Ventura enables you to adjust the brightness

of the display and save two brightness settings: one for driving during the day and one

for driving at night.

To set the daytime brightness select ‘DAY’ by

checking the tick box with your ﬁnger and then

using the‘+’ and ‘-‘ buttons to adjust the setting. To

set the‘NIGHT’ setting, simply check the tick box

with your ﬁnger for ‘NIGHT’ and follow the same

procedure. Once you have selected the desired

brightness press the‘OK’ button at the bottom of

the screen.

Autres manuels pour S1000

Table des matières

Langues :

Autres manuels Snooper Système de navigation automobile

Snooper

Snooper S8000 Manuel utilisateur

Snooper

Snooper TRUCKMATE LITE S6000 Manuel utilisateur

Snooper

Snooper Syrius Manuel utilisateur

Snooper

Snooper 6 Series Manuel utilisateur

Snooper

Snooper S7000 Manuel utilisateur

Snooper

Snooper AVN S7000 Manuel utilisateur

Snooper

Snooper 6 Series Manuel utilisateur

Snooper

Snooper truckmate s7000 Manuel utilisateur

Snooper

Snooper S1000 Manuel utilisateur

Snooper

Snooper Syrius Pro Manuel utilisateur

Snooper

Snooper 2 Series Manuel utilisateur

Snooper

Snooper S81 Series Manuel utilisateur

Snooper

Snooper Syrius Truckmate S2000 Manuel utilisateur

Snooper

Snooper S7000 Manuel utilisateur

Snooper

Snooper S1000 Manuel utilisateur

Snooper

Snooper MY-SPEED XL G2 Manuel utilisateur

Snooper

Snooper Truckmate Pro S6800 Manuel utilisateur

Snooper

Snooper Syrius Pro Manuel utilisateur

Snooper

Snooper S7000 Manuel utilisateur

Snooper

Snooper S5000 Manuel utilisateur

Snooper

Snooper 8100 SERIES Manuel utilisateur

Snooper

Snooper syrius s600 plus Manuel utilisateur

Manuels Système de navigation automobile populaires d'autres marques

Clarion

Clarion Navigation In-Car Entertainment Manuel utilisateur

Rosen

Rosen DP-1001 Manuel utilisateur

Alpine

Alpine INE-W970HD Manuel utilisateur

Skoda

Skoda AMUNDSEN+ Manuel utilisateur

Blaupunkt

Blaupunkt TravelPilot DX-N Manuel utilisateur

Pioneer

Pioneer MZ360500EX Manuel utilisateur

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Manuel utilisateur

Kenwood

Kenwood DNN991HD Manuel utilisateur

AvMap

AvMap Geosat 2C Manuel utilisateur

Eonon

Eonon GE01B Manuel utilisateur

Pioneer

Pioneer AVIC-Z920DAB Manuel utilisateur

Nextar

Nextar M3-MX - Automotive GPS Receiver Manuel utilisateur

Furrion

Furrion NV2200 Manuel utilisateur

Mio

Mio MOOV 200-Series Manuel utilisateur

Prestigio

Prestigio GeoVision 5150 Manuel utilisateur

Hummer

Hummer 2006 H3 Manuel utilisateur

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Guide de configuration

Garmin

Garmin StreetPilot c510 Manuel utilisateur