Smeg STA4515 Manuel utilisateur

Contents

1. Description of the controls _______________________________ 2

2. Operating instructions__________________________________ 15

3. Cleaning and maintenance______________________________ 27

4. Troubleshooting ______________________________________ 32

Thank you for choosing one of our products.

You are advised to read this manual carefully; it contains all the

information you need use your dishwasher safely, correctly and in the

most satisfactory manner.

Following the cleaning instructions provided here will keep your

dishwasher's performance at peak levels in the long term.

USER INSTRUCTIONS: these consist of recommendations for using

the appliance, a description of its controls and of the correct cleaning

and maintenance procedures.

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Smeg STA4515 o cerca

il tuo prodotto tra le migliori offerte di Lavastoviglie

User instructions

1. Description of the controls

1.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switching on,

programming, switching off, etc. are only possible when the door is open.

The panel shown is given as example: the form of the lights and buttons

may vary depending on the model.

1 ON/OFF BUTTON

Press this button to switch the dishwasher on/off.

SELECTED PROGRAM INDICATOR LIGHTS

This light indicates the program selected and the occurrence of a

fault (Troubleshooting).

PROGRAM SELECTION BUTTON

+ADJUSTING THEWATER SOFTENING SYSTEM

Used to select the wash program required and adjust the water

softening system.

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in “water hardness

adjustment” mode.

SALT WARNING LIGHT

This light Indicates the salt is finished.

5 RINSE AID WARNING LIGHT

This light indicates the rinse aid is finished.

6 OPTIONS and DISPLAY (on some models only)

User instructions

INFORMATION DISPLAY

(on some models only)

Information displayed

rogram duration

Remaining program time

Delayed start: 1

24 hours

Error message:

Err

<<OPTIONS (6)>>

Depending on the model, this zone may contain the information display

and one or more of the following options, identified by symbols and

described in more detail later in the manual.

All optionsexcept "Flexi Tabs" aredisabled attheendofthewashcycle.

To disable the “Flexi Tabs”option, pressthebutton(thelight goesout).

Flexi Tabs

Option recommended for the use of multi-function tablet

detergent.

HYCLEAN

Removes bacteria more effectively by prolonging the last hot

rinse.

Spread HALF LOAD WASH

Recommended for washing small loads spread across both

baskets.

PROGRAM DELAY

Allows the start of the program to be delayed by 9, 12 or 24

hours depending on the model.

QUICK TIME

Select this option when a short wash program is required (see

programs table).

ENERSAVE

Energy saving option.

PROGRAMS TABLE

The manual may include the programs table for several models. The set

of symbols at the top of the table indicates theprograms availablefor your

dishwasher

User instructions

WITCHING ON, S

ETTING THE WASHING PROGRAM AND

STARTING THE PROGRAM

Press the ON/OFF button (1); the PROGRAM INDICATOR LIGHT

(2) will come on;

Keep pressing the PROGRAM SELECTION button (3) until the

indicator light for the required program lights up;

Select the required option (if any, depending on models);

Close the door and after about 2" the program will start; while it is

running, the corresponding LIGHT will flash (program running

indicator

PROGRAM IN PROGRESS INDICATOR LIGHT

(on some models only)

When a program is running, a flashing light is projected onto the floor

under the right-hand corner of the door. At the end of the program, the

light goes out to reduce stand-by electricity consumption.

User instructions

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

LOAD CROCKERY AND

CUTLERY PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTES

(1)

WATER

LITRES POWER

kWh (1)

1RAPID 27’

Dishes with light dirt,

washed immediately after

use

Wash at 38°C

Rinse at 50°C

6,5 0,70

2 GLASS

Glass, china and mixed

dishes with light dirt.

Wash at 45°C

Cold rinse

Rinse at 70°C

Dry

12 0,90

3 ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on

residues

Hot prewash

Wash at 45°C

Rinse at 65°C

Dry

** **

4 AUTO 45-65

Pans and dishes with

normal dirt, even with

dried-on residues.

When the "AUTO" program is selected, the dishwasher

recognises the type of dirt and automatically adjusts the

washing parameters as appropriate.

5 SUPER

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash

Wash at 70°C

Cold rinse (2)

Rinse at 70°C

Dry

135

20 1,50

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

Models with ENERSAVE option

3 ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on residues.

Cold prewash

Wash at 45°C

Rinse at 55°C

Dry

** **

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

LOAD CROCKERY AND

CUTLERY PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTI

(1)

WATER

LITRES

POWER

kWh (1)

6SOAK

Pans and dishes awaiting

completion of the load Cold prewash 15 5 0,02

7 DELICATE

QUICK

Delicate dishes with normal

dirt.

Cold prewash

Wash at 50°C

Cold rinse

Rinse at 70°C

12,5 1,15

8 ECO

QUICK

Dishes with normal dirt,

washed immediately after

use.

Cold prewash

Wash at 60°C

Cold rinse

Rinse at 70°C

12,5 1,25

9 NORMAL

QUICK

Dishes with normal dirt,

washed immediately after

use.

Cold prewash

Wash at 70°C

Cold rinse

Rinse at 70°C

13 1,40

10 STRONG

and FAST

Mixed dishes with normal

dirt without dried-on

residues.

Wash at 65°C

Cold rinse

Rinse at 70°C 50 10 1,20

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

User instructions

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

LOAD CROCKERY AND

CUTLERY PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTES

(1)

WATER

LITRES POWER

kWh (1)

1RAPID 27’

Dishes with light dirt,

washed immediately after

use

Wash at 38°C

Rinse at 50°C

6,5 0,70

2 AUTO 45-65

Pans and dishes with

normal dirt, even with

dried-on residues.

When the "AUTO" program is selected, the dishwasher

recognises the type of dirt and automatically adjusts the

washing parameters as appropriate.

3 ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on

residues

Hot prewash

Wash at 45°C

Rinse at 70°C

Dry

** **

4 HALF LOAD

Half load of dishes with

normal dirt, washed

immediately after use.

Wash at 65°C

Cold rinse

Rinse at 70°C

Dry

135

13 1,15

5 SUPER

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash

Wash at 70°C

Cold rinse (2)

Rinse at 70°C

Dry

190

20 1,50

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

Models with ENERSAVE option

3 ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on residues.

Cold prewash

Wash at 45°C

Rinse at 55°C

Dry

** **

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

LOAD CROCKERY AND

CUTLERY PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTI

(1)

WATER

LITRES

POWER

kWh (1)

6SOAK

Pans and dishes awaiting

completion of the load Cold prewash 15 5 0,02

7 DELICATE

QUICK

Delicate dishes with normal

dirt.

Cold prewash

Wash at 50°C

Cold rinse

Rinse at 70°C

12,5 1,15

8 ECO

QUICK

Dishes with normal dirt,

washed immediately after

use.

Cold prewash

Wash at 60°C

Cold rinse

Rinse at 70°C

12,5 1,25

9 NORMAL

QUICK

Dishes with normal dirt,

washed immediately after

use.

Cold prewash

Wash at 70°C

Cold rinse

Rinse at 70°C

13 1,40

10 STRONG

and FAST

Mixed dishes with normal

dirt without dried-on

residues.

Wash at 65°C

Cold rinse

Rinse at 70°C 50 10 1,20

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

User instructions

NOTES AND REFERENCES

Only

run the soak program with partial loads.

The options cannot be used with the soak program.

The ENERSAVE option (if featured) cannot be used with soak, ultra clean, or any

programs which do not include the final drying stage.

* Standard program under

EN 50242

. The

ENERSAVE

option (if featured) must

enabled

See information sheet provided

(1) Programconsumption and durationfigures have been measured in accordance

with the EN 50242 standard. Values may vary depending on water supply and

ambient temperatures

and the type and quantity of dishes loaded.

(2)

1 or 2 cold rinses depending on the

model.

REFERENCES for the ENERGY LABEL supplied with the dishwasher:

- Annualenergy consumptionis based on280 standard wash cycles withcold

water using low-energy operating modes. Actual figures will depend on the

way in which the appliance is used.

- Water consumption is based on 280 standard wash cycles. Actual figures

will depend on the way in which the appliance is used.

- Information refers to the EN 50242 STANDARD program (identified in the

programs table), which is the most efficient in terms of combined energy and

water consumption. The program is recommended for dishes with a normal

level of dirt.

- Drying efficiency class on a scale from “G” (minimum efficiency) to “A”

(maximum efficiency).

User instructions

1.2 Wash programs

Before starting a wash program check that:

The water supply tap is open.

The softener container contains regenerating salt.

The correct amount of detergent has been added to

the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without

obstruction.

The dishwasher door is securely closed.

OPTION SELECTION

Press the button to therequired option; the correspondinglight will come

on to confirm activation.

It is not possible to select any options when the soak

program is being used.

All options except "Flexi Tabs" are disabled at the end of the

wash cycle. To disable the “Flexi Tabs” option, press the

button (the light will turn off).

All options, including "Flexi Tabs" are disabled when a

program is CANCELLED after it has begun.

ADDITIONAL OPTIONS (on some models only)

These are activated by pressing two buttons simultaneously as

shown by the graphics on the control panel (e.g. “Flexi Tabs” in this

illustration)

QUICK TIME PROGRAMS

Select this option together with any washing program (except the soak

program) to SHORTEN the cycle by from a minimum of 10% to a

maximum of 55%, depending on the cycle selected. To activate this

option, press the QUICK OPTION button (light comes on) after

selecting the program required. The option is automatically deactivated at

the end of the program.

Table des matières

Autres manuels Smeg Lave-vaisselle

Smeg

Smeg LS2000B Manuel utilisateur

Smeg

Smeg 19590 0434 Manuel utilisateur

Smeg

Smeg DWA214S Manuel utilisateur

Smeg

Smeg LVF32G Manuel utilisateur

Smeg

Smeg LSPU8653X Manuel utilisateur

Smeg

Smeg Dishwasher DWI409C Manuel utilisateur

Smeg

Smeg DWAI149 Manuel utilisateur

Smeg

Smeg KSB801 Instructions de fonctionnement

Smeg

Smeg LS12B Manuel utilisateur

Smeg

Smeg CW350B Manuel utilisateur

Smeg

Smeg DWD63BLE Manuel utilisateur

Smeg

Smeg KOA725 Instructions de fonctionnement

Smeg

Smeg DF345CQSX Manuel utilisateur

Smeg

Smeg KSB801 Manuel utilisateur

Smeg

Smeg STU8623 Manuel utilisateur

Smeg

Smeg LVS60ELMN Manuel utilisateur

Smeg

Smeg ST1146SE Manuel utilisateur

Smeg

Smeg EN Manuel utilisateur

Smeg

Smeg UG411DSUK Manuel utilisateur

Smeg

Smeg CWC601D Manuel utilisateur

Smeg

Smeg LSE990 Manuel utilisateur

Smeg

Smeg DD409S Manuel utilisateur

Smeg

Smeg PL6448XD Manuel utilisateur

Smeg

Smeg DI612CT Manuel utilisateur

Manuels Lave-vaisselle populaires d'autres marques

Electrolux

Electrolux ESI5211LOX Manuel utilisateur

KitchenAid

KitchenAid KUDB230B Manuel utilisateur

Brandt

Brandt BDJ424DB Manuel utilisateur

Asko

Asko DSD767UXXL.AU Manuel utilisateur

Beko

Beko DFN26210W Manuel utilisateur

NEFF

NEFF S153ITX00E Fiche technique

Midea

Midea SV 4.45 wi Manuel utilisateur

LG LDF7932 Manuel utilisateur

Gorenje

Gorenje GV63214 Manuel utilisateur

Hotpoint

Hotpoint HDA1100ZWH Manuel de service

Blomberg

Blomberg LDFN2240W Manuel utilisateur

AEG

AEG FFB83836PM Manuel utilisateur

Cylinda

Cylinda DM3220RFD Manuel utilisateur

Atag

Atag DW8214MB Manuel utilisateur

GE GLD8000 Series Manuel utilisateur

Siemens

Siemens SN23HI02KE Fiche technique

Omega

Omega ODW717X Manuel utilisateur

BORETTI

BORETTI BVW-683 Manuel utilisateur