Smeg PLA68XU Manuel utilisateur
INSTRUCTION MANUAL
G
GU
UI
ID
DE
E
F
FO
OR
R
U
US
SI
IN
NG
G
T
TH
HE
E
D
DI
IS
SH
HW
WA
AS
SH
HE
ER
R
A
AN
ND
D
T
TH
HE
E
W
WA
AS
SH
HI
IN
NG
G
P
PR
RO
OG
GR
RA
AM
MS
S
Rev 0.0 1
CONTENTS EN
Contents
1 INTRODUCTION ........................................................................................ 3
2 DESCRIPTION AND USE OF THE CONTROLS.......................................... 5
2.1 Front panel................................................................................................. 5
2.2 Setting the washing program and switching on and off............................... 6
2.2.1 Switching on .............................................................................................. 8
2.2.2 Selecting and starting the program............................................................. 8
2.2.3 End of program .......................................................................................... 9
2.2.4 Interrupting a program................................................................................ 9
2.2.5 Changing the current program ................................................................... 9
2.2.6 Canceling the current program ................................................................. 10
2.2.7 Options .................................................................................................... 10
2.2.8 Switching off ............................................................................................ 12
2.3 Additional functions.................................................................................. 12
2.3.1 Adjusting the water softener..................................................................... 12
3 ENERGY SAVING AND ENVIRONMENTAL RESPECT.............................. 14
3.1 Reducing the consumption of detergent and respecting the environment.14
4 REMOVING THE DISHES......................................................................... 15
5 TROUBLESHOOTING .............................................................................. 16
2 Rev 0.0
EN
Rev 0.0 3
INTRODUCTION EN
1 INTRODUCTION
Thank you for choosing one of our products. To use this dishwasher
correctly and safely, please read this manual carefully. The manual is
divided into sections giving you a step-by-step guide to all your ap-
pliance’s functions. The texts are easy to understand and are com-
plete with detailed illustrations. This user-friendly manual will provide
answers to all your questions about use of the dishwasher.
Before using this dishwasher, carefully read chapter 2 “Use and
safety warnings” of the attached general manual.
For any other information about use and maintenance of the dish-
washer, read the enclosed general manual carefully.
This manual comprises the following sections:
INTRODUCTION: general information about the manual.
USER INSTRUCTIONS: advice on using the washing programs and
information about all the dishwasher functions.
Nomenclature of figures and tables:
The progressive number of each figure is shown in the bottom right-
hand corner of the relative box. An example of a progressive number
is “Fig. 4-01”, where the first number (4) indicates the section to
which the figure belongs, while the second number (01) indicates
the progressive number of the figure in section 4 (Fig. 4-01 is the
first figure in section 4). The tables are numbered in the same way,
bearing in mind that “Tab.” is used instead of “Fig.” (e.g.: Tab. 4-01
is the first table in section 4). If a table occupies more than one page,
a letter is added after the progressive number (e.g.: “Tab. 4-01a”,
Tab. 4-01b”).
4 Rev 0.0
INTRODUCTION
EN
Symbols used in this manual (see tab. 1-01)
DANGER. This symbol highlights information and warnings which, if not
observed, may compromise personal safety or damage the appliance.
This symbol highlights general information and warnings.
Tab. 1-01
Rev 0.0 5
USER INSTRUCTIONS EN
2 DESCRIPTION AND USE OF THE CONTROLS
2.1 Front panel
All the dishwasher controls are grouped on the front panel (see fig. 2-01).
A brief description (see tab. 2-01) of the various elements on the front panel is
given below.
5
1326
789 10 4
1On/Off button
2Start/Pause button
3Program selection button
4Program indicator lights
5Sanitation indicator light
6Program delay button
7Program delay indicator lights
8No salt indicator light
9No rinse-aid indicator light
10 Recessed door handle
Tab. 2-01
Fig. 2-01
6 Rev 0.0
USER INSTRUCTIONS
EN
2.2 Setting the washing program and switching
on and off
The dishwasher is equipped with a control panel (see fig. 2-02) which is used
to program the appliance and switch it on and off.
5
132
6
789 4
To select the most suitable program for the dishes to wash, consult the fol-
lowing tables which specify the most appropriate type of washing sequence
depending on the kind of dishes and how dirty they are (see tab. 2-02).
Fig. 2-02
Rev 0.0 7
USER INSTRUCTIONS EN
PROGRAM NUMBER
AND SYMBOL
DISHES AND
CUTLERY
PROGRAM
SEQUENCE
TIME CONSUMPTION
MINUTES
(1)
WATER POWER
KWh (1)
RINSE
PANS AND
DISHES
WAITING
FOR THE
LOAD TO BE
COMPLETED
Cold pre-wash. 16’ 6.5 l
1.64 gal. 0.03
CRISTAL SLIGHTLY
DIRTY DISHES
Wash at 45°C
(113°F).
Cold rinse.
Rinse at 69°C
(156.2°F).
Dry.
66’ 13.7 l
3.62 gal. 0.6
NORMAL
SLIGHTLY
DIRTY PANS
AND DISHES
BUT WITH
DRIED-ON
RESIDUE
Wash at 50°C
(122°F).
Rinse at 68°C
(154.4°F).
Dry.
110’ 14 l
3.67 gal. 0.8
DAILY
WASH
DIRTY PANS
AND DISHES
WITH DRIED-
ON RESIDUE
Cold pre-wash.
Wash at 65°C
(149°F).
Cold rinse.
Rinse at 69°C
(156.2°F).
Dry.
100’ 18.2 l
4.8 gal. 0.85
EXTREME
WASH
ETL
SANITATION
LISTED
VERY DIRTY
PANS AND
DISHES WITH
DRIED-ON
RESIDUE
Pre-wash at
45°C (113°F).
Wash at 70°C
(158°F).
2 cold rinses.
Rinse at 70°C
(158°F).
Dry.
117’ 22 l
5.8 gal. 0.98
Tab. 2-02
(1) The cycle times listed in the use and care manual are based on normal soil loads and 120°F
(49°C) incoming water and will vary based on your actual conditions.
- Only “EXTREME WASH” program conform to NSF std 184 and is certified by INTERTEK with the
ETL SANITATION LISTED.
- When the “Sanitized” light shine it means that the dishwasher and its contents have been sani-
tized according to the requirements of the National Sanitation Foundation (NSF).
8 Rev 0.0
USER INSTRUCTIONS
EN
Only run a soak program with half loads.
After using the above table to choose the most suitable washing cycle, pro-
gram the appliance.
Before starting a washing program, make sure that:
The water supply tap is open.
There is regenerating salt in the water softener tank (to add
salt, see the instructions in the general manual).
The correct amount of detergent has been added to the dis-
penser (to add detergent, see the instructions in the general
manual).
The spray arms are able to rotate freely and without obstruc-
tion.
The racks have been correctly loaded (see the instructions in
the general manual).
The dishwasher door is securely closed.
2.2.1 Switching on
Press on/off (ref. 1 fig. 2-02) to start the dishwasher; the indicator lights show
the “status” of the dishwasher.
2.2.2 Selecting and starting the program
Programming operations can only be performed with the door clo-
sed. With the door open, the program indicator lights (ref. 4 fig. 2-
02) remain off.
Press the program selection button (ref. 3 fig. 2-02) several times until the
indicator light corresponding to the required program turns on (ref. 4 fig. 2-
02);
if necessary, press the relative buttons to select the complementary func-
tions you wish to use (e.g. “Programming delay”);
to start the dishwasher, press the start/pause button (ref. 2 fig. 2-02) for a
few seconds until the indicator light of the selected program starts flashing
(confirmation beep);
Program status is indicated by the indicator light flashing throughout the
cycle.
If the door of the dishwasher has not been closed or has been incor-
rectly closed, the washing cycle will not begin.
•
•
•
•
•
•
•
•
•
•
Rev 0.0 9
USER INSTRUCTIONS EN
If you open the door while the appliance is working, you must close
it and start the program again by pressing start/pause (ref. 2 fig.
2-02). The program will resume from where it was interrupted.
If the temperature in the tray exceeds 50°C (122°F), the program will
resume after about 30 seconds.
2.2.3 End of program
The end of the program is signaled by a short beep. Additionally, the indica-
tor light of the “daily wash” and “extreme wash” programmes (marked “end”)
flashes.
2.2.4 Interrupting a program
To interrupt the current program:
press the start/pause button (ref. 2 fig. 2-02); the indicator light of the cur-
rent program remains on (confirmation beep); at this point, start the cycle by
pressing start/pause (ref. 2 fig. 2-02), or change or cancel the program.
2.2.5 Changing the current program
To change the current program:
interrupt it (see para 2.2.4 “Interrupting a program”);
select a new program (see para 2.2.2 “Selecting and stating a program”).
•
•
•
Table des matières
Autres manuels Smeg Lave-vaisselle
Smeg
Smeg Dishwasher Manuel utilisateur
Smeg
Smeg LSA6445FX Manuel utilisateur
Smeg
Smeg Dishwasher ST143 Manuel utilisateur
Smeg
Smeg DF612BL Manuel utilisateur
Smeg
Smeg DI6012-1 Manuel utilisateur
Smeg
Smeg GS326-449 Manuel de service
Smeg
Smeg ST1123S-1 Manuel utilisateur
Smeg
Smeg KM45IB Manuel utilisateur
Smeg
Smeg Dishwasher DWI710 Manuel utilisateur
Smeg
Smeg PL614WH Manuel utilisateur
Smeg
Smeg Classica Aesthetic STX325BLLC Manuel utilisateur
Smeg
Smeg LSA14X7 Manuel utilisateur
Smeg
Smeg DF13E2SV Manuel utilisateur
Smeg
Smeg ST5324L Manuel utilisateur
Smeg
Smeg ST215-9 Manuel utilisateur
Smeg
Smeg DFA12E1W Manuel utilisateur
Smeg
Smeg DF613PW Manuel utilisateur
Smeg
Smeg DWAU214X Manuel utilisateur
Smeg
Smeg LSPU8643WH Manuel utilisateur
Smeg
Smeg DC122B Manuel utilisateur
