Smeg LVS60ELMN Manuel utilisateur
INSTRUCTION MANUAL
G
GU
UI
ID
DE
EF
FO
OR
RU
US
SI
IN
NG
GT
TH
HE
ED
DI
IS
SH
HW
WA
AS
SH
HE
ER
RA
AN
ND
DT
TH
HE
EW
WA
AS
SH
HI
IN
NG
GP
PR
RO
OG
GR
RA
AM
MS
S
Contents
1. Description of the controls________________________________14
2. Troubleshooting _______________________________________22
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need about the right conditions for the proper, safe use
of your dishwasher.
The individual sections are laid out to provide you with a step-by-step
guide to all your appliance's functions; the texts are easy to understand
and are complete with detailed illustrations.
This user-friendly manual will provide answers to all your questions
about use of the dishwasher.
For any other information about use and maintenance of the dishwasher,
read the enclosed manual carefully.
USER INSTRUCTIONS: useful information is provided for the use of the
washing programs and all the dishwasher's functions.
User instructions
1. Description of the controls
1.1 Front panel
All the dishwasher control are grouped on the front panel.
1ON/OFF BUTTON
2ON/OFF LIGHT
3START/PAUSE BUTTON
4START/PAUSE LIGHT
5PROGRAMS SELECTOR
6½ LOAD WASH BUTTON (on some models only)
7½ LOAD WASH LIGHTS (on some models only)
8NO SALT LIGHT (on some models only)
9NO RINSE AID LIGHT (on some models only)
10 RECESSED DOOR HANDLE
On the pages which follow the operating status of the indicator lights will
appear as follows:
Light off Light on Light flashing
User instructions
PROGRAMS TABLE
DURATION CONSUMPTION
PROGRAM SELECTION TYPE AND GRADE DIRT PROGRESS
PROGRAM MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
SOAK
PANS AND DISHES
IN WAITING OF
COMPLETING
THE LOAD
Cold prewash 15 60,03
QUICK
DISHES NOT MUCH DIRTY
AND WITH "FRESH DIRT"
WITHOUT RESIDUAL DRY
Wash at 38°C
Cold rinse
Rinse at 58°C
45 13 0,80
DELICATE DISHES
NOT VERY DIRTY
Wash at 45°C
Cold rinse
Rinse at 68°C
Dry
75 16 1,05
ECO
PANS AND DISHES
NOT VERY DIRTY BUT
WITH DRY RESIDUALS
Wash at 55°C
Cold rinse
Rinse at 68°C
Dry
140 14 1,10
BIO
(*)
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Cold prewash
Wash at 55°C
Cold rinse
Rinse at 65°C
Dry
160 17 1,05
DAILY
PANS AND DISHES
WITH NORMAL DIRT,
WITHOUT DRY RESIDUAL
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
95 14 1,25
NORMAL PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
100 17 1,28
SUPER
PANS AND DISHES
VERY DIRTY AND WITH
DRY RESIDUALS
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 68°C
Dry
110 20 1,60
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program (*) Program BIO
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5/6
1.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the
dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without
obstruction.
•The dishwasher door is securely closed.
LIGHTING
When the ON/OFF button (1) is pressed, the dishwasher switches on.
The ON/OFF (2) and START/PAUSE (4) lights will indicate one of the
following states:
Program start
Dishwasher ready to execute a new program.
Program end
Door closed and washing program over.
Alarm
Alarm state (see chapter "Troubleshooting").
User instructions
PROGRAMMING
All programming operations are only possible with the door closed.
To select a new program, the dishwasher must be in the "Program
start" state described above. Turn the PROGRAM SELECTOR (5) to
the program of your choice (see "PROGRAMS TABLE").
START PROGRAM
Press the START/PAUSE button (3) for a few seconds, until
the START/PAUSE light (4) starts to flash. A beep confirms
the operation.
PROGRAM SEQUENCE
For the entire duration of the program, ON/OFF (2) indicator
light remains permanently on, whereas the START/PAUSE
(4) indicator light flashes.
END PROGRAM
To indicate the end of the program, a short beep sounds
and the ON/OFF (2) and START/PAUSE (4) lights
illuminate simultaneously.
Before a new washing cycle can be selected the dishwasher
must be in "Program start" state: press the START/PAUSE
button (3) until the configuration of indicator lights (2) and
(4) is as follows.
INTERRUPTION OF A PROGRAM
Press the START/PAUSE button (3) for a few seconds, until
the configuration of the ON/OFF (2) and START/PAUSE (4)
lights is as follows.
You may now restart ("START PROGRAM") or change the program which
was interrupted.
User instructions
TO CHANGE A PROGRAM
To change the running program it is necessary:
•to interrupt the running program (see “INTERRUPTION OF A PROGRAM”);
•select the new program;
•to press again the START/PAUSE button (3) to make start the new
program.
ANNULLING A PROGRAM
To annul the program in progress, it must first be interrupted (see
“INTERRUPTION OF A PROGRAM”).
Turn the PROGRAM SELECTOR (5) to any point on the "empty" sector
(with no symbols) on the left of the selector and start the dishwasher.
After the water has discharged from the tank, the ON/OFF
(2) and START/PAUSE (4) lights will both remain on.
If the door is opened with the dishwasher in operation, the
appliance switches to "Pause" state, indicated by a series of
beeps and the following configuration of the ON/OFF (2)
and START/PAUSE (4) lights.
Once the door has been closed again, the "START PROGRAM" procedure
already described must be repeated. The washing cycle will restart from
the point where it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.
If the dishwasher door is not properly closed, the washing cycle will not
start.
User instructions
HALF LOAD WASH FUNCTION (on some models only)
Pressing button ½ LOAD WASH (6) selects washing on the top basket
only.
After selecting the program, proceed as follows:
•press the
½ LOAD WASH button (6) once to select washing in the
top basket only;
•press the button (6) again to select washing in the bottom basket
only.
•Press the button (6) a third time to return to the full load washing
mode (washing in both baskets).
The option is disabled at the end of the cycle.
One half of the cutlery basket can be placed in the ½ LOAD program
basket.
WARNING: dishes and cutlery placed in the basket not selected will
not be washed.
INDICATOR LIGHT CONFIGURATION FOR HALF-LOAD WASHING (7)
Washing in top basket only.
Washing in bottom basket only.
Washing in both baskets.
User instructions
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
•Always try to run the dishwasher fully loaded.
•Do not wash the dishes in running water.
•Use the washing program that is most appropriate for each type of
load.
•Do not carry out any preliminary rinsing.
•If available, connect the dishwasher to a hot water supply up to
60°C.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:
•separate the more delicate items from dishes that are more
resistant to aggressive detergents and high temperatures;
•do not pour the detergent directly on the dishes.
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is advisable to unload the lower basket first, and then the
upper basket.
User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an device for the user to adjust the
water softening system according to the hardness of the water supply.
According to the machine model, the selector which acts on the
adjustment may be located:
•inside the plastic locking ring located on the right-hand side, inside
the dishwasher;
•inside the water softener, just below the cap.
Both allow for adjustment to 5settings:
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH) French Degrees (°dF) SETTING
0 - 4 0 - 7 Setting N. 1 NO SALT
5 - 15 8 - 25 Setting N. 1
16 - 23 26 - 40 Setting N. 2
24 - 31 41 - 60 Setting N. 3
32 - 47 61 - 80 Setting N. 4
48 - 58 81 - 100 Setting N. 5
Contact your local water board for information on the hardness of your
water supply.
Table des matières
Autres manuels Smeg Lave-vaisselle
Smeg
Smeg lvs367sx Instructions d'installation et d'utilisation
Smeg
Smeg DWA147W Manuel utilisateur
Smeg
Smeg GM287-110 Manuel utilisateur
Smeg
Smeg ST8647 Manuel utilisateur
Smeg
Smeg DWAI152XT Manuel utilisateur
Smeg
Smeg DWAU6315X3 Manuel utilisateur
Smeg
Smeg DF612BL Manuel utilisateur
Smeg
Smeg STFABCR3 Manuel utilisateur
Smeg
Smeg PLA8743X Manuel utilisateur
Smeg
Smeg Dishwasher DDW104 Guide de l'utilisateur
Smeg
Smeg DF352CS Manuel utilisateur
Smeg
Smeg DI410C Manuel utilisateur
Smeg
Smeg DF352CS Manuel utilisateur
Smeg
Smeg LSA6051B Manuel utilisateur
Smeg
Smeg DWI612C Manuel utilisateur
Smeg
Smeg Dishwasher CA01-3 Manuel utilisateur
Smeg
Smeg LVS137B Manuel utilisateur
Smeg
Smeg UG405DSUK Manuel utilisateur
Smeg
Smeg BLV1VE Manuel utilisateur
Smeg
Smeg DWD64.1SS Manuel utilisateur
